COMPANION V6450 Bedienungsanleitung

Driver’s License Optical Scanner

Packing List

Thank you for purchasing COMPanion’s Driver’s License Optical Scanner. This package should contain the

following items. If any are missing or damaged, please call COMPanion at 1-800-347-6439 or

1-801-943-7277. For Customer Support, call 1-800-347-4942.

This packing list is used for the Indicated product(s):

❑Driver’s License Optical Scanner—V6450

Your package should contain the following:

❑ScanShell Driver’s License Scanner

❑Soft Protective Case

❑USB Cable

❑Fabric Cleaning Card

❑2 Calibration Cards

❑2 Clear Card Sleeves

❑Driver’s License Scanner Software CD

❑Scanner Installation Guide

❑COMPanion Exchange and Warranty Repair Policy

IGS005.0—V6450 Driver’s License Optical Scanner

Page !of !117

Driver’s License Optical Scanner

Installation Guide

Distributed under license by COMPanion Corporation. Under the copyright laws, this document may not be copied, in whole or in part without

written consent of Evelyn Manufacturing. The same proprietary and copyright notices must be a"xed to any permitted copies as were a"xed to

the original. KeepnTrack™, and the associated logo and icons are registered trademarks of Evelyn Manufacturing. Other trade names are the

property of their respective corporations. Printed in the United States of America.

IGS005.0—V6450 Driver’s License Optical Scanner

Page !of !217

NOTE: YOU MUST HAVE INTERNET EXPLORER 8 OR GREATER INSTALLED TO USE THE DRVERS

LICENSE SCANNER WITH KEEPNTRACK. THIS SCANNER IS ONLY SUPPORTED ON INTERNET

EXPLORER.

Setting up the scanner

When unpacking, verify that you have received the scanner, manual, installation CD, calibration card,

cleaning fabric, and a USB cable. If any components are missing, contact COMPanion Customer Support at

1-800-320-5830 or support@keepntrack.com

Summary of Installation Steps

In order to use your scanner with KeepnTrack, you must ﬁrst properly install the hardware and device drivers

before conﬁguring the scanner software:

1. Install the scanner on your computer by installing the required software and then plug in the scanner to

set up the hardware.

NOTE: DO NOT PLUG THE SCANNER INTO THE COMPUTER UNLESS PROMPTED BY THE SOFTWARE

OR THE INSTALLATION PROCESS IS COMPLETE.

2. Conﬁgure the KeepnTrack Administration Settings to use a scanner.

3. Calibrate the scanner.

4. Finally, conﬁgure the KeepnTrack Kiosk to use your scanner. This step may require changing some of the

default settings in your browser. For more information see the Browser Settings section toward the end of

this guide. These steps will be covered comprehensively below.

System Requirements

Windows

Minimum

Windows XP SP2

(32-bit)

1 GB Free Hard Drive Space, 1 GB RAM, USB 1.1 connection

Internet Explorer 8

Recommended

Windows 7 or Windows 8

(32 or 64 bit)

20 GB+ Free Hard Drive Space, 2 GB+ RAM, USB 2.0

connection

Internet Explorer 10

IGS005.0—V6450 Driver’s License Optical Scanner

Page !of !317

Before using your scanner to you must install the scanner software. The software can be found on the

installation CD provided. Locate and Run the ﬁle named sdk_setup.exe to launch the installer (Image 1 &

Image 2).

NOTE: THE SOFTWARE COMPONENTS MAY ALSO BE DOWNLOADED FROM:

http://www.keepntrack.com/support_downloads.html

Image 1

Image 2

IGS005.0—V6450 Driver’s License Optical Scanner

Page !of !417

After reviewing the CSSN SDK License Agreement, click I Agree to accept the terms and continue with the

installation process (Image 3).

Image 3

Next, select a destination directory on your computer where you wish to install the Driver’s License Scanner

ﬁles. COMPanion Corporation recommends installing to the default directory. Once you have selected the

installation directory, click Next to continue (Image 4).

Image 4

IGS005.0—V6450 Driver’s License Optical Scanner

Page !of !517

You will need to select the components you wish to install. The Driver’s License scanner requires the

following components for use with KeepnTrack:

1. Driver License, ID & Passports.

2. Live Update SDK.

Select these components by placing a check mark in the box provided and then click Next to continue

(Image 5).

Image 5

In the next step specify Express Install and click Next to continue (Image 6).

Image 6

IGS005.0—V6450 Driver’s License Optical Scanner

Page !of !617

Choose the software to install that matches the type of scanner you have purchased. For this guide we will

be selecting the ScanShell 800DX driver. After choosing your scanner model click Next to continue (Image

7).

Image 7

NOTE: THE THREE SCANNER MODELS CURRENTLY SUPPORTED ARE: SCANSHELL 800R, SCANSHELL

800DX, AND SNAPSHELL CAMERA.

Click Next to begin the installation (Image 8 & Image 9).

NOTE: KEEPNTRACK DOES NOT CURRENTLY SUPPORT THE RF READER, ENSURE THIS OPTION IS NOT

SELECTED.

Image 8

IGS005.0—V6450 Driver’s License Optical Scanner

Page !of !717

Image 9

When the installation is complete, select Finish (Image 10).

Image 10

Hardware Set-Up

Once you have successfully installed the software you you will need to connect your hardware and conﬁgure

it for use. Begin by connecting the small “D”-shaped end of the USB cable to the ScanShell 800DX and then

connect the USB cable from your scanner to the computer. The scanner is now installed and ready for use.

IGS005.0—V6450 Driver’s License Optical Scanner

Page !of !817

NOTE: DO NOT CONNECT THE SCANNER TO A USB KEYBOARD OR OTHER HUB AS THE POWER

SUPPLIED BY THESE DEVICES IS INSUFFICIENT.

KeepnTrack Conﬁguration

You will need to enable the ID Scanner for all operators that will be using the ID Scanner. First, log into

KeepnTrack Administration. Under the Manage tab select the Operators sub-tab and perform a ﬁnd for one

of the operators that will be using the scanner. Select that user from the results list on the left. Unlock the

record and select the Permissions sub-tab. Expand the Devices area.

KeepnTrack has several settings available which allow you to customize how the ID scanner performs at your

facility. These controls can be modiﬁed independently for each operator as desired (Image 11).

1. ID Scanner is Enabled: This control allows you to hide the SCAN ID button on the Kiosk.

2. Show Scanner State Menu in Kiosk: This control allows you to enable the state issuing ID control at a

kiosk.

3. Default ID Scanner State: This control allows you to select which state is set by default when scanning

ID’s. Auto Detect is the default setting.

4. Enable ID Scanner Maintenance: This control will display maintenance options to calibrate or clean the

Scanshell 800R and Scanshell 800DX.

Ensure the option titled Enable ID Scanner is selected at this time (Image 11).

Image 11

IGS005.0—V6450 Driver’s License Optical Scanner

Page !of !917

Once scanner maintenance has been enabled select the option to Calibrate ID Scanner. You will be

prompted ﬁrst to insert the calibration card into your scanner. Do so at this time, noting the alignment

directions on the back of the card. Click OK to begin the calibration process (Image 12). Once calibration

has ﬁnished, click OK.

Image 12

NOTE: FROM TIME TO TIME THE SCANSHELL 800DX MAY REQUIRE MAINTENANCE OR CLEANING.

USE THESE CONTROLS WHENEVER NECESSARY TO CALIBRATE OR CLEAN THE SCANNER.

Once your scanner has been calibrated you may log into the KeepnTrack Kiosk to perform Sign In using a

valid Drivers License. After selecting Sign In, verify the scanner is ready as indicated by a green colored light

on the front of the scanner. Place an ID in the scanner opening, squarely aligned to the right, and click the

SCAN ID button (Image 13).

Image 13

IGS005.0—V6450 Driver’s License Optical Scanner

Page !of !10 17

Inhaltsverzeichnis

Andere COMPANION Scanner Handbücher

COMPANION

COMPANION Simple Scanner Bedienungsanleitung

COMPANION

COMPANION IG0086.1 Bedienungsanleitung

COMPANION

COMPANION Wireless Universal KeepnTrack Scanner V6555 Bedienungsanleitung

COMPANION

COMPANION Wireless Universal KeepnTrack Scanner V6555 Bedienungsanleitung

COMPANION

COMPANION V6455 Bedienungsanleitung

COMPANION

COMPANION V1140 Bedienungsanleitung

COMPANION

COMPANION V6455U Bedienungsanleitung

COMPANION

COMPANION Alexandria V1142 Bedienungsanleitung

COMPANION

COMPANION V1030U Bedienungsanleitung

COMPANION

COMPANION V1139 Bedienungsanleitung

COMPANION

COMPANION V1030A Bedienungsanleitung

COMPANION

COMPANION ScanShell 800 Bedienungsanleitung

COMPANION

COMPANION V1142A Bedienungsanleitung

COMPANION

COMPANION V1143 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung