Component Playgrounds AF30-12 Bedienungsanleitung

Installation Instructions

AF30-12

Required Crew: 2-3 Required

Concrete: 6-9, 80 lb. bags

Required Tools:

● Wheelbarrow

● Step Ladder (6’ or taller)

● Shovel

● Tape Measure

● Digging Bar or Pick

● Level

● Allen Wrench (Provided)

● Open end or Box Wrenches: 9/16”, ¾”

● Hammer or Mallet

● Ratchet Handle & Sockets: 9/16”, ¾”

● Marker Pen

● Drill: Cordless or electric, or impact driver

Component Playgrounds is concerned about the safety of your vision. It

is important that you choose to protect your vision by wearing proper

safety glasses during each and every phase of this construction

process.

PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE BEGINNING

The AF30-12 can be installed as a one day project. The normal time

required to install the AF30-12 is about 2-4 hours for a two to three man

crew. This time requirement will vary dependent upon the composition of

the soil and the speed of the installers. Mix and pour the concrete as the

last step. *Before digging, please obey local laws by notifying your

local underground utilities marking organization*

Top Rail Assembly

Step 1: Slide the ends of the 10’ Top Rail as far as it will go into the Sleeves

of the Triple Ends.

Step 2: Insert and tighten (4) 3/8” x 3/8” set screws into each of the Triple

End Sleeves using Allen Wrench provided.

Component Playgrounds

BRASS BUSHING SWING HANGER

1. Loosen and remove the two nyloc jam nuts. 2. Reassemble on to swing top rail.

Tighten securely so that the hanger is

firmly attached in place and cannot slide or swivel along top rail. 3. Attach

carabineer with chain through the ring.

Note: We recommend you check the pendulum in the swing hangers at

least every 6 months for normal wear.

ASSEMBLY

1. Slide the drilled end of the legs into the triple end. Find the two A-Frame Bolt Packs.

2. Align the holes in the legs with the holes in the triple end and join together using a

3/8” x 2 3⁄4” hex bolts and 3/8” nyloc nuts. Tighten.

3. Insert and tighten set screws into triple end with allen wrench provided.

Next have two adults stand on opposite ends and stand structure up into

the place you want it to be installed.

Mark holes around a-frame leg, move set to the side of markings and dig holes.

Notice! Most of the “A” frame leg hole needs to be dug towards the inside of the “A”

frame leg.

Place the set into the holes. Align the legs.

Place a level on the top rail and make the necessary adjustments to get set level.

When you are satisfied that the structure is level, mix and pour the

concrete according to the package directions. You will use

approximately one and a half to two 80 lb. bags in each leg hole.

Concrete will cure faster in warm conditions and slower in cold

conditions. The package directions on the concrete you buy will indicate

approximate curing times. If you are in doubt, it is better to wait longer

allowing the concrete more time to cure. We recommend 3-5 days

before use.

The amount of concrete to be used in each hole may vary. For

example: If you are installing your play structure into a grassy area, you

may want to leave the concrete about three to four inches below the top

of the hole. This will allow you to replace the sod and have enough soil

depth for the grass to continue growing. As a result of this, you will use

a lesser amount of concrete than someone who chooses to fill the

concrete to the top of the hole. The concrete should only be filled to the

top of the hole if you are planning to install 6 – 12 inches of soft fall

ground cover. The concrete footings should never be exposed as this

presents a potential risk of injury to those who use this play equipment.

Double Check and Secure: Before using your swing set, double

check and secure any loose set screws or nuts and bolts and enjoy

your Component Playground. Allow all of the concrete to cure

completely before using your playground. (3-5 days).

After concrete has cured, assemble and attach swing chains

and seats.

Read Before Use

Congratulations! You have just purchased one of the finest pieces of playground equipment available.

Your family will enjoy many hours of fun with this fine equipment. Playground equipment can be most

enjoyable, but there are some dangers if not used properly. You should be aware of the following:

Equipment should be installed in a level area, free from obstructions, with enough space to allow for

adequate clearance in all directions when equipment is in maximum use.

Keep objects away from equipment that could interfere with persons using it or that could be hazardous.

Misuse or abuse of this playground equipment is dangerous and can cause serious injury.

This equipment should be inspected before each use and any worn, defective or missing parts should be

replaced.

Children should play on equipment only with adult supervision and should be duly warned of the potential

hazards in this type of equipment when used improperly. Children should be instructed as to proper

caution to take in its use.

Equipment should NOT be used when it is wet or icy.

Equipment should only be used in a well-lit area.

Do NOT use equipment when tired, under stress or emotionally upset.

Do NOT overcrowd.

Do NOT use equipment when under the influence of alcohol or drugs.

Do NOT attempt somersaults or gymnastic stunts on or using this equipment.

Know your own limitations and exercise caution at all times.

Do not jump off of equipment when dismounting. It is a dangerous practice to jump on or off equipment.

Do not attempt to use equipment for something other than the use for which it was designed and

intended, or in a manner other than that for which it was designed and intended.

While every attempt is made by Component Playgrounds to ensure the highest degree of

safety in all of our equipment, we cannot guarantee freedom from injury. The user

assumes all risk of injury due to use. All merchandise is sold on this condition, which no

representative of the company can waive or change.

Maintenance of your playground

We hope that you and your family will enjoy many hours of great family fun while using your

Component Playgrounds Products. We appreciate your business. Our goal is to provide safe,

durable and fun products using the best materials available. Your product should be mostly

maintenance free. However, you should consider the following suggestions with regard to the

up keep of your new swing set.

1. Chains and Connectors: The chains are coated with the highest quality bright zinc

coating and the highest quality polymer coatings available. However, over time the

zinc coating may become discolored or eventually have surface rust appear. The

polymer coating may also become discolored with time and may eventually crack. This

depends mostly upon environmental conditions and normally will not affect the

durability and safety of the product. However, these items should be inspected

regularly for excessive wear and should be replaced as necessary.

2. Swing Hangers: These items are coated with a high quality galvanizing. However,

swing hangers may become discolored or may eventually rust. Should this happen, a

touch up using a cold galvanizing compound followed by a coat of silver aluminum spray

paint will make them look new again. These items can be purchased in aerosol cans

(“spray paint”) at most hardware stores and at Component Playgrounds. The brass

bushings inside of the swing hanger are impregnated with lubricant and will not

generally require any further lubrication. However, these should be periodically

inspected for wear and replaced as necessary. Note: Twisting the chains while swinging

will put extra wear on the swing hanger parts. If your children enjoy this practice, please

inspect the swing hangers more frequently.

3. Tire Swing Knuckles (for sets with a tire swing): The tire swing knuckle arrives at

Component Playgrounds pre-lubricated from the manufacturer. However, it is good

practice to inspect the knuckle and be sure that there is adequate lubrication before it

is used for the first time. After that, the tire knuckles should be lubricated at least twice

annually to prevent excessive wear and the eventual failure of the tire swing knuckle.

4. Welds: The heat from the welding process will damage the galvanizing that is on the

pipe when it arrives to us from the manufacturer. This damage to the galvanizing is

Inhaltsverzeichnis

Andere Component Playgrounds Schaukel Handbücher

Component Playgrounds

Component Playgrounds AF60-12 Bedienungsanleitung

Component Playgrounds

Component Playgrounds SS36-10 Bedienungsanleitung

Component Playgrounds

Component Playgrounds PH30-10 Bedienungsanleitung

Component Playgrounds

Component Playgrounds AF20 Bedienungsanleitung

Component Playgrounds

Component Playgrounds AF60 Bedienungsanleitung

Component Playgrounds

Component Playgrounds CH30-10 Bedienungsanleitung

Component Playgrounds

Component Playgrounds AF20-12 Bedienungsanleitung

Component Playgrounds

Component Playgrounds AR40 Bedienungsanleitung

Component Playgrounds

Component Playgrounds MT40-10 Bedienungsanleitung

Component Playgrounds

Component Playgrounds MT32 Bedienungsanleitung

Component Playgrounds

Component Playgrounds CP-AR24-8 Bedienungsanleitung

Component Playgrounds

Component Playgrounds MT32-10 Bedienungsanleitung

Component Playgrounds

Component Playgrounds CP-AF36-8 Bedienungsanleitung

Component Playgrounds

Component Playgrounds CP-AR12-8 Bedienungsanleitung

Component Playgrounds

Component Playgrounds AF-01 Bedienungsanleitung

Component Playgrounds

Component Playgrounds MT30-10 Bedienungsanleitung

Component Playgrounds

Component Playgrounds AF30-10 Bedienungsanleitung

Component Playgrounds

Component Playgrounds SS36 Bedienungsanleitung

Component Playgrounds

Component Playgrounds CH45 Bedienungsanleitung

Component Playgrounds

Component Playgrounds MT21 Bedienungsanleitung

Component Playgrounds

Component Playgrounds AF30 Bedienungsanleitung

Component Playgrounds

Component Playgrounds MT10-10 Bedienungsanleitung

Component Playgrounds

Component Playgrounds CP-PS24-8x10 Bedienungsanleitung

Component Playgrounds

Component Playgrounds AF60-10 Bedienungsanleitung

Beliebte Schaukel Handbücher anderer Marken

Ledon

Ledon 1185 Bedienungsanleitung

Backyard

Backyard LITTLE BRUTUS 2051171 Gebrauchs- und Pflegehandbuch

Kettler

Kettler 0S01053-0000 Bedienungsanleitung

Lemeks

Lemeks Palmako MV70-3121-4 Installationshandbuch

Lifetime

Lifetime 90143 Bedienungsanleitung

Belleze

Belleze 014-HG-14340 Bedienungsanleitung

Elvox

Elvox RS07 Bedienungsanleitung

gartenpirat

gartenpirat Premium 4.2 GP1305 Bedienungsanleitung

Taizhou Taiyan Swing

Taizhou Taiyan Swing 805-447 Bedienungsanleitung

KidKraft

KidKraft LAUREL F29715 Bedienungsanleitung

Plum

Plum Roloway Bedienungsanleitung

OOGarden

OOGarden FOSSA Bedienungsanleitung

Lakeland Mills

Lakeland Mills CF1128 Bedienungsanleitung

Backyard Discovery

Backyard Discovery MONTPELIER 30211F Bedienungsanleitung

LifeSpan Kids

LifeSpan Kids AMBER PE83 Bedienungsanleitung

SPORTSPOWER

SPORTSPOWER MSC- 4132 Montageanleitung

Backyard Discovery

Backyard Discovery VISTA 54273 Bedienungsanleitung

Huck

Huck Honeycomb nest Bedienungsanleitung