COMPX ecoForce Bedienungsanleitung
ecoForce — Recessed mount instructions
1
ecoForce – RECESSED mount
No-battery push button cabinet lock
Thank you for purchasing the ecoForce no-battery
push button cabinet lock – recessed mount version –
manufactured by CompX.This instruction sheet explains
how to operate the lock, install the lock and change
the combination from the standard factory combination
1-2-3-4-5. The buttons give a clear indication when
properly pressed. Each button can only be used once
in the combination. You can use any of the buttons in
any order and you can press two or more buttons at the
same time as one step in your combination.
FACTORY DEFAULT COMBINATION is 1-2-3-4-5
1. Press Clear Button down completely
2. Press Combination Buttons down in order and one-at-a-time
3. Rotate Knob 90˚ clockwise to unlock
4. Return Knob 90˚ counter-clockwise to lock
MODELS WITH KEY OVERRIDE
1. Insert key completely
2. Rotate key 90˚ clockwise to unlock
3. Return Knob 90˚ counter-clockwise to re-lock
Discover a lost or forgotten combination by following the instructions at compxecoforce.com
ecoForce features
To operate:
To change or to set the combination:
1. Clear Button
2. Combination Buttons
3. Knob
4. Key Override
(some models)
5. Programming Slide
1
5
3
42
1 2 3 4
To Change the Combination:
1. Press Clear Button down completely
2. Press current Combination Buttons down in order and one-
at-a-time
3. Slide Programming Slide towards the knob
4. Press Clear Button down completely to clear current
combination
5. Enter new combination in steps by pressing buttons in the
order you choose; you can use any of the buttons in any
order and you can press two or more buttons at the same
time as one step in your combination. To set code 1–2&3–4,
you would press 1, then simultaneously press 2 & 3, then
press 4.
A user code can be as short as one digit or up to five digits.
You may press each button only once, and you may press
all five buttons simultaneously if so desired. If you make a
mistake or enter an incorrect code, press the clear button
and start over.
6. Rotate Knob 90˚ clockwise to set combination
7. Return Knob 90˚ counter-clockwise to re-lock
5
ecoForce — Recessed mount instructions
2
ecoForce – RECESSED mount
No-battery push button cabinet lock
To recessed mount install the lock, use
the ecoForce mounting templates on the
following pages. ecoForce manual or self-
locking can be configured to meet dozens of
latching points (see ecoForce latching point
sheet: compx.com/downloads).
For surface mounting instructions, see compxecoforce.com
Examine the door for mounting. If the hinges
are on the right side of the door use a Right
Hand template, and if the hinges are on
the left side of the door use a Left Hand
template. Place the template on the door
considering your pre-determined latching
points before drilling.
To install:
Installation templates – horizontal right hand & horizontal left hand
WARNING: Print this
page and measure the line
above. It is ONE INCH
LONG. If it measures less
than or more than one inch,
the template measurements
also need to be scaled
accordingly.
FAILURE TO DO SO
COULD RESULT IN
MISDRILLED HOLES.
1"
Right hand
Left hand
3
ecoForce — Recessed mount instructions
ecoForce – RECESSED mount
No-battery push button cabinet lock
Installation templates – vertical right hand & vertical left hand
WARNING: Print this
page and measure the line
above. It is ONE INCH
LONG. If it measures less
than or more than one inch,
the template measurements
also need to be scaled
accordingly.
FAILURE TO DO SO
COULD RESULT IN
MISDRILLED HOLES.
1"
Vertical right hand Vertical left hand
Recessed mount requires mounting brackets, made for specific material thicknesses.
N302053-160
thicker material
than 5/16"
N3-2053-161
5/16" to 5/8"
N3-2053-162
thinner material
than 5/8"
4
ecoForce – RECESSED mount
No-battery push button cabinet lock
Part #: X756162536K0000B
Copyright 2019 © CompX Security Products / 864.297.6655 / compx.com / PO Box 200, Mauldin, SC 29662
Any companies and/or products referred to herein are marks or registered trademarks of their respective companies, owners and/or mark holders.
Installation templates – inverted right hand & inverted left hand
Inverted
right hand
WARNING: Print this
page and measure the line
above. It is ONE INCH
LONG. If it measures less
than or more than one inch,
the template measurements
also need to be scaled
accordingly.
FAILURE TO DO SO
COULD RESULT IN
MISDRILLED HOLES.
1"
Inverted
left hand
Andere COMPX Sperren Handbücher
COMPX
COMPX Stock Locks C1804 Leitfaden
COMPX
COMPX Stock Locks C4160 Leitfaden
COMPX
COMPX Stock Locks C1801 Leitfaden
COMPX
COMPX Stock Locks C5001LP Leitfaden
COMPX
COMPX Timberline CB-265 Bedienungsanleitung
COMPX
COMPX MFW 29058 Leitfaden
COMPX
COMPX StealthLock SL-100 Bedienungsanleitung
COMPX
COMPX OU-4200-NA Leitfaden
COMPX
COMPX MFW-1058 Leitfaden
COMPX
COMPX Stock Locks C4073 Leitfaden
COMPX
COMPX MFW 23168 Leitfaden
COMPX
COMPX B12 Leitfaden
COMPX
COMPX C8701 Leitfaden
COMPX
COMPX Timberline CB-241 Bedienungsanleitung
COMPX
COMPX Timberline CB-235 Bedienungsanleitung
COMPX
COMPX Timberline CB-280 Bedienungsanleitung
COMPX
COMPX Chicago CSA4107 Bedienungsanleitung
COMPX
COMPX Stock Locks C2174-70-DC-KD Leitfaden
COMPX
COMPX MFWPLTT078 Leitfaden
COMPX
COMPX eLock 150 Series Bedienungsanleitung
Beliebte Sperren Handbücher anderer Marken
ELCOM
ELCOM 7205 Bedienungsanleitung
Stealth SAFES
Stealth SAFES ShadowVault Bedienungsanleitung
Knox
Knox KeySecure 5 Bedienungsanleitung
Kwikset
Kwikset 48334/01 Bedienungsanleitung
Metra Electronics
Metra Electronics Door Access Terminal Combo Bedienungsanleitung
Kilitronik
Kilitronik miniK10m Bedienungsanleitung