Concept Pro CPL-MVIR-IP2M/2.8 Bedienungsanleitung

IP CAMERA QUICK START GUIDE

CPL-MVIR-IP2M/2.8

CPL-MVIR-IP2M/2.8G

Mini IR Vandal Dome IP Camera

QUICK START GUIDE

IP CAMERA QUICK START GUIDE

1WHAT’S IN THE BOX?

Packaging Contents

IP Camera x1 Torx Wrench x1

Mounting Template x 1 Quick Start Guide x1

Screw & Plastic Anchor x2 RJ45 Waterproof Connector Kit x1

2INSTALLATION

Install the IP Camera in 3 Steps

1. Use the included mounting template sheet to drill holes in the mounting surface.

2. Feed required cables through the installation surface and connect all required cables

to the camera.

3. Use the included Torx wrench to loosen the three screws on the dome cover and re-

move the dome cover from the camera body. Line up the camera body to the drilled

holes on the mounting surface and ax the camera to the mounting surface. Install

a MicroSD card inside the camera if desired and after positioning the lens module,

replace the dome cover and tighten the three screws.

3SURFACE MOUNT INSTALLATION

Note: For other bracket mounting instructions, see installation instructions in the manual.

D78-Self -tapping screw installation sketch map

Self-tapping Screw

IP CAMERA QUICK START GUIDE

4CONFIGURING THE CAMERA

Camera Connections

D78-inside construction schamatic drawing

Cover

3-axis

Adjustment

Screw

Built-in

Microphone

Micro SD

Card Slot

Reset Button

Net Status Indicator

D78- interface introduction

DC 12v

Power

Input PoE

5CONNECTING VIA INTERNET EXPLORER

How to connect and operate the camera via IE

Default IP Address:

http://192.168.1.10

User Name: admin

Password: admin

This product supports Internet

Explorer 8 and higher.

Download Plug-in

When prompted, download and run the WebClient ActiveX

control. If the prompt does not automatically appear, click

Download to manually open the ActiveX control.

Congure Camera

from Web

After installing the ActiveX control, use the default log-in

credentials to access the camera web interface and live

monitoring screen.

For security purposes, please navigate to the Cong tab, access

Advance Option > Account, and modify the default password.

IP CAMERA QUICK START GUIDE

5CONNECTING VIA INTERNET EXPLORER

How to connect and operate the camera via IE

Connect to NVR

To connect this product to a NVR, please make sure the NVR and

IP camera are on the same network segment.

NVR

Monitor

Input/Output

This product has a built-in microphone audio input and supports

up to 128GB MicroSD card.

SD card

D78-SD card installation

Power Supply

Only use PoE or recommended power supply adapters

with this camera.

AC24V

DC12V

PoE++(Oponal)

IP CAMERA QUICK START GUIDE

6SEARCH & MODIFY CAMERA IP ADDRESS

How to modify the camera IP

While the default camera IP address is 192.168.1.10 and DHCP

is enabled by default, you may use the Device Manager software

tool to nd any CPL-MVIR-IP2M/2.8 cameras on the same

network.

1. Scan the QR Code above to access downloadable les for this camera.

Select and download DeviceManager.exe.

2. Install the Device Manager tool and open the program.

3. Click the IP Search button to nd all CPL-MVIR-IP2M/2.8(G) cameras on the same

network as the PC.

4. Select a camera to modify, input any desired IP Address, Subnet Mask, Gateway,

HTTP Port, and TCP Port settings, then click the Modify button. Use caution when

setting static IP addresses and conguring port numbers to prevent IP conicts.

IP CAMERA QUICK START GUIDE

7TROUBLESHOOTING

Common issues answered

Can’t nd the camera IP address using Device Manager tool or default IP address:

Make sure Ethernet and/or DC power cables are correctly connected to the camera.

Make sure the PoE switch or DC power source meets the camera power

requirements. If using PoE, ensure the PoE switch or other PoE power source is

powered on.

Make sure the PC is on the same network as the camera and ping the camera’s IP

address. On your PC, go to Start>Programs>Accessories >Command Prompt or

Run>cmd. Type ping then the camera local IP address and press Enter. If you get the

message “Request timed out,” the PC and camera are not on the same network or

the camera is not connected. The camera is connected if you receive replies.

The camera may be set for static IP mode using an incorrect IP address. DHCP is

enabled on the camera by default, which means it will automatically obtain an IP

address from your router. Reset the camera to factory default settings by removing

the camera cover and pressing the reset button for 5 seconds or more.

Can’t connect to the camera on a web browser using local IP address:

See steps above.

Verify the camera’s local IP address with the Device Manager tool

(see Section 6 above for more information).

Can’t connect to camera on a web browser using a DDNS address:

Port forwarding not set up. Make sure the HTTP port (default: 80) and Media port

(default: 34567) are forwarded on your router to the camera’s local IP address.

Multiple cameras are using the same port number to connect. Congure each

camera to use dierent ports and forward the new ports on your router.

Can’t connect to camera video on a web browser:

Ensure the WebClient ActiveX control has been installed and restart Internet Explorer

before attempting to reconnect to the camera.

Enable Compatibility Mode in Internet Explorer for the camera web address by

clicking Options > Compatibility View Settings > Add this website.

Video performs poorly on browser:

Insucient bandwidth available for high-quality stream 1.

Select stream 2 under Stream. Stream 2 provides a lower-resolution to conserve

bandwidth and improve performance on low-bandwidth connections.

IP CAMERA QUICK START GUIDE

8CAUTION

Safety precautions

1. This installation should be performed by qualied service personnel and must abide

by all local codes.

2. Avoid installation on a surface subjected to frequent vibration or shocks.

3. Do not operate the camera beyond its specied temperature/humidity range or

power ratings.

4. If any damage or suspected damage occurs, shutdown the power source,

disconnect the camera, and contact your service provider.

5. Do not install the camera under unstable lighting conditions. Severe lighting

changes or ickering may cause the camera to improperly operate.

6. Never use the camera near a gas or oil leak.

7. Do not disassemble the camera.

8. Never install the camera directly facing a strong light source.

9. Ensure all removable covers are replaced to protect the inner components of the

camera.

10. Do not install near devices which emit a strong electromagnetic eld.

11. Only use a clean cloth for cleaning.

PLEASE FOLLOW THE ABOVE CAUTIONS – FAILURE TO DO SO MAY

INVALIDATE THE PRODUCT WARRANTY OR CAUSE SERIOUS INJURY.

Changes or modications not expressly approved by the manufacturer may cause the

camera to become damaged or inoperable. This may invalidate the user warranty.

IP CAMERA QUICK START GUIDE

Scan the QR Code above to access

downloadable les for this camera.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Concept Pro Sicherheitskamera Handbücher

Concept Pro

Concept Pro AIR3016 Bedienungsanleitung

Concept Pro

Concept Pro CBP6314DNIR Bedienungsanleitung

Concept Pro

Concept Pro VCP553 Bedienungsanleitung

Concept Pro

Concept Pro VHSDIR-670EXT-IP Bedienungsanleitung

Concept Pro

Concept Pro CVP9324DN-IP4M Bedienungsanleitung

Concept Pro

Concept Pro CVP5325DNIR-IP2M/2.8 Bedienungsanleitung

Concept Pro

Concept Pro CVP9328DNIR-IP2M-Z Bedienungsanleitung

Concept Pro

Concept Pro CVP9328DNIR-IP4M Bedienungsanleitung

Concept Pro

Concept Pro CVP9324-AHD Bedienungsanleitung

Concept Pro

Concept Pro CVP5325DNIR-AHD2M/2.8 Bedienungsanleitung

Concept Pro

Concept Pro AIR8010-AHD-Z Bedienungsanleitung

Concept Pro

Concept Pro AIR8012-IP3M-Z Bedienungsanleitung

Concept Pro

Concept Pro VHSDIR-680EXT-IP Bedienungsanleitung

Concept Pro

Concept Pro VHSD-810EXT Bedienungsanleitung

Concept Pro

Concept Pro VHSDIR-812EXT-IP3M Bedienungsanleitung

Concept Pro

Concept Pro AHD Series Bedienungsanleitung

Concept Pro

Concept Pro CVP9324DN-IP Bedienungsanleitung

Concept Pro

Concept Pro CVP9324DNIR-HDA-3MP Bedienungsanleitung

Concept Pro

Concept Pro CBP360-HD Bedienungsanleitung

Concept Pro

Concept Pro AIR3526-AHD2M Bedienungsanleitung

Concept Pro

Concept Pro VCP7236 Bedienungsanleitung

Concept Pro

Concept Pro AIR8012-IP3M-Z Bedienungsanleitung

Concept Pro

Concept Pro AIR3526-IP2M Bedienungsanleitung

Concept Pro

Concept Pro CP-HSD20-IP Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung