Connective Peripherals DS1M12 Bedienungsanleitung

DS1M12 - Quick Start Guide

Clearance Number: CP#032

Document Reference Number: CP_000042

DS1M12_Quick_Start_Guide 1.1

Congratulations on your purchase of the Connective

Peripherals DS1M12 Multi-Function Instrument. This guide

contains the specifications and installation procedure for the

DS1M12 drivers and application software.

The DS1M12 is a multi-function instrument, combining the

functions of Oscilloscope, Data Logger, Spectrum Analyser,

Volt Meter, Frequency Meter and Signal Generator in a

single instrument.

It features simultaneous 12-bit sampling on both channels,

a native sampling rate of 1MS/s (20MS/s for repetitive

signals) and sophisticated hardware triggering including

delayed time base and pulse width. It also has a 3rd

channel which can be a waveform generator output or an

external trigger input. Powered from USB, the DS1M12

Stingray needs no external power supply.

DS1M12 EasyScope II (oscilloscope) and EasyLogger (data

logging) software for Windows can be downloaded royalty-

free from the Connective Peripherals website

http://www.connectiveperipherals.com.

Features

Hardware Features

Combined Oscilloscope, Data Logger, Signal Generator,

Spectrum Analyzer, Voltage and Frequency Meter

functions

12 Bit ADC Resolution

12-Bit data streaming simultaneously on both channels

32k Byte Waveform buffer

Sampling Rate

DS1M12 - Quick Start Guide

Clearance Number: CP#032

Document Reference Number: CP_000042

DS1M12_Quick_Start_Guide 1.1

oOscilloscope - 20M S/s (repetitive), 1M S/s native

oDataLogger - up to 50k S/s

Maximum input voltage ± 50V DC (35V RMS AC)

AC / DC Coupling

Edge, min/max, pulse width and delayed trigger modes

Analog Bandwidth 250KHz

Inbuilt 10-bit waveform generator with ± 3.5V output

range and 1k buffer

Self Powered USB Interface (250mA)

Instrument carrying bag included

Attractive enclosure with rubberized mouldings

Dimensions W: 116mm x H: 30mm x D: 100mm

Weight: 160g (excluding cable)

EasyScope II Software Features

Timebase –2µs/div to 50ms/div in 14 steps

Y-Scale 10mV/div to 5V/div

On Screen X and Y measurement cursors

FFT Spectrum Analyser display on both channels

Meter displays –Min, Max, Mean, True RMS Voltage and

Frequency

Save results to CSV file

Save screen to BMP file

Waveform Generation –Sine wave, Square wave,

Triangle, Sawtooth and User Defined waveforms

EasyLogger Software Features

Sampling Rate selectable from > 100,000 samples / sec

to 100 sec/sample

DS1M12 - Quick Start Guide

Clearance Number: CP#032

Document Reference Number: CP_000042

DS1M12_Quick_Start_Guide 1.1

Flexible Y-axis scaling (V, mV, User Defined)

Flexible X-axis scaling (Sample Number or Time)

Save to CSV, BMP, TXT or Binary files

Import from previously saved Binary files

Up to 3 on-screen cursors to track data

Up to 4 pop-up or e-mail alerts

Text memos for incorporating user notes in the data

What’s In the Box?

Please check that the box contains the following items :

1 x DS1M12 Oscilloscope and Waveform Generator

1 x DS1M12 Instrument pouch

1 x USB cable

This Quick Start Guide

Getting Started

The DS1M12 requires device drivers to be installed on your

PC to enable communication with the instrument. Install the

device drivers prior to installing the applications below.

Driver Installation

Driver installation can be completed in one of two ways:

1. The latest DS1M12 device drivers are available through

the Microsoft Windows Update service. Simply plug in

the DS1M12. When the Found New Hardware Wizard

appears, allow it to find the drivers from the Windows

DS1M12 - Quick Start Guide

Clearance Number: CP#032

Document Reference Number: CP_000042

DS1M12_Quick_Start_Guide 1.1

Update service. Windows 7 defaults to automatically

download the device drivers without prompts.

2. Download the latest device drivers available (at the time

of writing the latest version was 2.08.14):

https://www.connectiveperipherals.com/products/usb-

instruments/usb-oscilloscope/ds1m12.html

Extract the files to a convenient location on your local

drive.

Connect the supplied USB cable to the DS1M12 and the

other end of the cable to a spare USB port on the PC.

Power is supplied by the USB port, so no external power

is required.

The Windows “Found New Hardware Wizard” will appear.

Select the choice to install the drivers from a specific

location and then browse to the folder created in the

previous step where you unzipped the files.

The DS1M12 utilizes a 2-channel FTDI chip, so the

wizard will re-appear a second time to install the drivers

for both device channels. On completion of installation

the device is ready for use.

Application Installation (Oscilloscope)

The scope application file can be downloaded from:

https://www.connectiveperipherals.com/uploader/D

S1M12_Setup.zip

Extract the files to a convenient location on your

local drive.

DS1M12 - Quick Start Guide

Clearance Number: CP#032

Document Reference Number: CP_000042

DS1M12_Quick_Start_Guide 1.1

Run the executable DS1M12_Setup.exe by double

clicking on the file and follow the on screen prompts to

install the application.

Application Installation (DataLogger)

The datalogger application file can be downloaded from:

https://www.connectiveperipherals.com/uploader/DDL1M

12_Setup.zip

Extract the files to a convenient location on your local

drive.

Run the executable DDL1M12_Setup.exe by double

clicking on the file and follow the on screen prompts to

install the application.

The applications can then be accessed from the START>All

Programs list of applications.

Measuring High Voltages

The DS1M12 is rated at ± 50V DC maximum input (35V

RMS AC) even with a x10 oscilloscope lead attached.

Measuring higher voltages than this directly may damage

the instrument and invalidate the warranty. The instrument

is not galvanically isolated. The ground of the internal

circuitry connects directly to the ground of the host PC via

the USB connection. To measure high voltages such as

mains supplies, use a high voltage differential probe such as

the Connective Peripherals SI-9001 for your personal safety

and to prevent damage to the instrument.

DS1M12 - Quick Start Guide

Clearance Number: CP#032

Document Reference Number: CP_000042

DS1M12_Quick_Start_Guide 1.1

Troubleshooting

If a static / ESD discharge occurs down the earth lead of the

oscilloscope, the unit may lock up and require the host pc to

be re-started to resume operation. In practice, this is an

unusual condition and should not affect normal operation.

We anticipate you will receive many years of satisfactory

service out of your purchase, however, should you

experience any problems we will do our best to rectify

them. Should you experience problems please check our

website for known issues and software updates. Should this

fail, you can e-mail our support department using the

contact details below.

Contact Details

Website: https://www.connectiveperipherals.com

E-Mail (Support): [email protected]

DS1M12 - Quick Start Guide

Clearance Number: CP#032

Document Reference Number: CP_000042

DS1M12_Quick_Start_Guide 1.1

Revision Record Sheet

Authors

Graham Brown

Filename

DS1M12_Quick_Start_Guide

Revision

Date

Details

Rev 1.0

2011-06-07

First release –Document created by

merging the old USB Instruments leaflet

and the 2010 EasySYNC quickstart guide

2011-06-07

Reviewed (Bob) –comments added,

minor formatting updates, minor edits

(<Alt> + 241 (on number pad) will give

the ± symbol)

2011-06-20

Graham B - Shortened document by

removing picture from front page and

re-formatting the paragraphs.

Edited paragraph on first page to

remove reference to DLLs and

examples.

2011-06-21

Graham B –Removed reference to

Linux on first page.

2011-06-21

G Lunn –comments added

Rev 1.0

2011-06-21

Ian Dunn –reviewed. Minor comments

added

Rev 1.0

2011-06-22

Graham B –Removed ‘hardware

upgradeable over USB’ from features.

Added comment that FFT available on

both channels in software features list.

DS1M12 - Quick Start Guide

Clearance Number: CP#032

Document Reference Number: CP_000042

DS1M12_Quick_Start_Guide 1.1

Rev.1.1

2019-03-25

Re-branding to reflect the migration of

the product from EasySync to

Connective Peripherals name (changed

logo, copyright, internal hyperlinks)

Approved

Sign Off

Signatory

Signature

Date

Managing Director

Sales and Marketing

Manager

Engineering Manager

Clearance Approval

- This Document is cleared for Connective Peripherals use and

unrestricted circulation.

- An NDA is not required prior to external circulation.

Inhaltsverzeichnis

Andere Connective Peripherals Messgerät Handbücher

Connective Peripherals

Connective Peripherals EasyScopeIII Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung