Service Handbook OEB/OES/OGB/OGS
AS/11-2011 0_01e_Table of Contents_d
Page 3 / 4
5. Trouble shooting List and Error Codes Electronic
5.1 Error Codes
5.2 General
5.3 Steam Generator
5.4 Condenser
5.5 Motor
5.6 Electronic
5.7 Safety temperature probe Convection heating (B7)
5.8 Error diagnosis with help of the LEDs on the Controls
(module self-checking)
6. Service Instructions
6.1 Electronic Control Board installation
6.1.1Operation module (BM) replacement
6.1.2Control Module (SM) replacement
6.1.3Arrangement module replacement
6.1.4Gas module (GM) removal
6.1.5Description of the LEDs on the Controls (module self-checking)
6.2 Updating the Control and Operation module - Software
6.4 Steam Generator drain pump (only OEB and OGB)
6.5 Probe positions / Probe assembly and replacing
6.5.1Safety thermostat above unit ceiling on table units
6.5.2Safety thermostat behind the motor fastening on standing units
6.5.3Probe with stuffing box assembly B10 (CTC)
6.5.4Safety thermostat probe N8 on flange immersion heater
6.5.5Double safety thermostats B8 and B7.2 in gas units with blower burner
6.5.6Screw in probes B3, B4, B5 and oven probe B6
6.6 Water Level probe
6.7 Steam Generator-Immersion heater replacement (only OEB)
6.8 Motor / Fan Wheel installation and removal
6.9 Pressure Switch Cleaning System - Trouble Shooting
