CoolGear USBG-7DU2 Bedienungsanleitung

Metal 7-Port USB 2.0 Hub

– Din RAIL Mounting

Japan NEC Chip

Product Manual

Coolgear, Inc.

Version 1.1

September 2017

Model Number: USBG-7DU2

www.coolgear.com

2 USBG-7DU2 – Product Manual

www.coolgear.com

Revision History

Revision Date Author Comments

1.0 07/14/2015 Coolgear Original format

1.1 10/4/2017 Coolgear New Manual Format

About this document

This product manual outlines installation and features of the USBG-7DU2 Metal 7-Port

USB 2.0 Hub – DIN RAIL Mounting Japan NEC Chip.

Scope

The scope of this manual is to give the user of the product an understanding of its use

with detailed diagrams and verbiage. The manual allows the users to apply the product

to their application.

Intended Audience

This product is intended for use in numerous industries including but not limited to

applications such as; ATM, Kiosk, Warehouse, Data Center, and others.

Product Support

[email protected]

USBG-7DU2 – Product Manual 3

www.coolgear.com

Table of Contents

1. Introduction.........................................................................................................4

1.1 Features .................................................................................................................. 4

1.2 Connector Layout.................................................................................................... 5

1.3 Hardware Installation ............................................................................................. 5

1.4 Checking the Hub Installation................................................................................. 6

1.5 Environmental Specifications ................................................................................. 6

1.6 Drawing ................................................................................................................... 6

2. Notes, Tips, Warnings, and Safety.........................................................................8

3. Supporting References .........................................................................................9

Table of Figures

Figure 1 – Connector Layout…………………………………………………………………………………………..5

Figure 2 – Device Manager Generic Hub…………………………………………………………………………6

Figure 3 - Screw Lock Cable Connection.............................................................................6

Figure 4 – Dimensional Drawing……………………………………………………………………………….…….7

Figure 5 – Input Wiring Diagram…………………………………………………………………………………….8

4 USBG-7DU2 – Product Manual

www.coolgear.com

1. Introduction

The USBG-7DU2 7-Port USB 2.0 Hub provides unique features to work in the bus-

powered mode without an external AC power adapter, it also features an external 2-pin

Terminal Block Connector for self-powered mode. The High-Speed 7-port USB 2.0 hub

provides an ideal solution to expand 7 USB 2.0 ports from one single USB 2.0 host port.

It provides a self power source (+7~24VDC from 2-pin Terminal Blocks) to provide

enough power on USB 2.0 buses.

WEIGHT .631 lbs

DIMENSIONS 5.23”(L) x 2.42” (W) x 1.43” (H)

(13.30 x 6.15 x 3.63 cm)

UPC 736983901422

WARRANTY 1 year from date of purchase

COLOR Black

DOWNSTREAM PORTS 7 USB Type-A Ports

UPSTREAM PORTS 1 USB Type-B Port

SYSTEM REQUIREMENTS Compatible with all USB enabled operating systems.

1.1 Features

•Compliant with USB Specification

Revision 2.0

•Rigid and Din Rail-Mountable Metal

Case

•Supports High-speed and or Full-speed

Packet Protocol Sequencer for

Endpoint 0/1

•

Provides 7 Downstream Facing Ports

•

Supports USB Screw Lock Mechanism

to Increase Reliability

•Supports 480Mbps, 12Mbps, and

1.5Mbps Speed

•Supports Self-powered and Bus-

powered Mode

USBG-7DU2 – Product Manual 5

www.coolgear.com

1.2 Connector Layout

Figure 1

Upstream Port Connector Self Power Input Connector

Type-B connector from upstream USB 2.0

port. It is connected from host or another

USB 2.0 hub.

This 2-pin (one pin plus voltage and the

other pin is ground) terminal block

connectors are used to connect strong

power to self-power the hub, the voltage

can be in the range from +7V to 24VDC.

1.3 Hardware Installation

1. Use static electricity discharge precautions. Remove possible static

discharge potential from any objects that the hub may come in contact with

before installation. This can be accomplished by touching a bare metal

chassis rail after you have turned off the power.

2. Apply DC power (range from +7V to 24V) to the 2-pin Terminal Block

Connector. The hub is bus-powered by the upstream USB port; this terminal

block connector is to add power to ensure enough power for the 4

downstream ports.

3. Connecting USB Host cable: The host cable is a standard A-to-B USB 2.0

cable. Please connect the type-A end connector of the cable to your

upstream USB port, then connect the type-B end connector to this hub. Since

the USB hub is plug-and-play, you don’t have to turn off your host computer

when installing the hub.

4. Connect the USB Devices to the downstream ports of this hub.

5. Mount your hub on the wall or DIN RAIL if required.

6 USBG-7DU2 – Product Manual

www.coolgear.com

1.4 Checking the Hub Installation

To check the USB hub installation in Windows device manager, please follow the

following steps:

1. Click Start

2. Click Control Panel

3. Click System

4. Click Device Manager

button

5. Double Click Universal

Serial Bus Controller

6. Double click Generic

USB Hub, the

message will show

that this device is

working properly

Figure 2

1.5 Environmental Specifications

Specification Data

Operating Temperature: 0-55°C (32 to 131°F)

Operating Humidity: 5 to 95% RH

1.6 Drawing

Figure 3

USBG-7DU2 – Product Manual 7

www.coolgear.com

Figure 4

8 USBG-7DU2 – Product Manual

www.coolgear.com

2. Notes, Tips, Warnings, and Safety

Note

In some cases, you will see an error message said that the USB Hub caused

the USB bus power over the current limit, please ignore this message since

the hub is hot plug and its power capacitor will cause a very short period of

current. It will NOT affect your USB function.

Tip N/A

Warning

Please make sure the polarity of the input power should be correctly match

the terminal block pins, otherwise it will damage the hub.

Figure 5

Safety

•Read the entire Product Manual before implementing this product for

your application. This manual contains important information about

electrical connections that must be followed for safe and proper

operation.

•Inspect the product closely for visual defects before putting it to use.

•Keep away from areas where moisture builds, this product contains

electrical components that can be damaged by moisture build up, this

can adversely affect your equipment connected to it.

•Do not disassemble the product. Handling the product’s internal

components can expose it to ESD (Electro-Static Discharge) hazards

that can affect the function of the device.

•If this product is not functioning properly, email our support team at

[email protected].

USBG-7DU2 – Product Manual 9

www.coolgear.com

3. Supporting References

Document Link

Website Product Page https://www.coolgear.com/product/metal-7-

port-usb-2-0-hub-w-din-rail-mounting-kit-

japan-nec-chip

and / or trademarks of Coolgear Inc. Coolgear Inc. are continuously improving upon its products. Product specifications are subject

to change without notice.

Andere Handbücher für USBG-7DU2

Inhaltsverzeichnis

Andere CoolGear Schalten Handbücher

CoolGear

CoolGear USBG3-3X4M Bedienungsanleitung

CoolGear

CoolGear CG-1600i-RM Bedienungsanleitung

CoolGear

CoolGear CG-4P31CHUB Bedienungsanleitung

CoolGear

CoolGear CG-G17PHHT Bedienungsanleitung

CoolGear

CoolGear USBG-4PUSB2-MH Bedienungsanleitung

CoolGear

CoolGear USBG-4U2ML Bedienungsanleitung

CoolGear

CoolGear USBG-4U2ML Bedienungsanleitung

CoolGear

CoolGear USBG-7U3ML Bedienungsanleitung

CoolGear

CoolGear CG-7PU313C Bedienungsanleitung

CoolGear

CoolGear CG-7U3DS Bedienungsanleitung

CoolGear

CoolGear USB3- 16U1 Bedienungsanleitung

CoolGear

CoolGear USBBG-12U2ML Bedienungsanleitung

CoolGear

CoolGear CG-10U2AML Bedienungsanleitung

CoolGear

CoolGear USBG-10XU1 Bedienungsanleitung

CoolGear

CoolGear CG-16PU31H Bedienungsanleitung

CoolGear

CoolGear USBNET-400i Bedienungsanleitung

CoolGear

CoolGear USBG-4U3ML Bedienungsanleitung

CoolGear

CoolGear USBG-4SU2MLA Bedienungsanleitung

CoolGear

CoolGear USB3-16U1 Bedienungsanleitung

CoolGear

CoolGear CG-7PU31HB Bedienungsanleitung

CoolGear

CoolGear USBG-3X4M Bedienungsanleitung

CoolGear

CoolGear CG-UC31PD4H Bedienungsanleitung

CoolGear

CoolGear USBG-7DU2 Bedienungsanleitung

CoolGear

CoolGear CG-U31iS4PH Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung