Cooper Lighting Impact Wall Medium IMI-699 Bedienungsanleitung

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation,

operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.

NOTE: Specifications and dimensions subject to change without notice.

Impact Wall Medium

Thru-Wiring “SC” Option

Sheet 1 of 1

7/22/08 IMI-699

INSTALLATION INSTRUCTIONS

IMPORTANT : READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE

GENERAL: Upon receipt of the fixture, thoroughly inspect for any freight

damage which should be brought to the attention of the delivery carrier.

Compare the catalog description listed on the packing slip with the

fixture label on the housing to assure you have received the correct

material.

SAFETY: This fixture must be wired in accordance with the National

Electrical Code and applicable local codes and ordinances. Proper

grounding is required to insure personal safety. Carefully observe

grounding procedure under installation section.

WARNING: Risk of Fire/Shock. If not qualified, consult an electrician.

Risk of Electric Shock. Disconnect power at fuse or circuit breaker

panel or fuse box before installing or servicing.

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 ADH081515

NOTE: This instruction sheet is applicable for both Trapezoid and Cylinder shapes.

Trapezoid shape is used for illustration.

THROUGH WIRING ASSEMBLY:

NOTE: Through Wires should be rated for minimum 140°C with 320-400W

fixture and minimum of 120°C with 250W and below.

1. Open the door by unscrewing two [2] door screws. If lamp is installed,

carefully unscrew it. Remove the reflector by unscrewing four [4] reflector

mounting screws FIG. 1.

2. Supply wires should now be accessible. Carefully pull the three [3] supply wires in

through the rubber plug while holding the plug to make sure it does not pop

inside the housing.

3. Line up the two [2] larger holes in the bracket provided with two [2] existing holes

in the back casting. With existing holes lined up, drill four [4] 0.166" Diameter holes in back casting FIG. 2.

4. Install the bracket provided with four [4] thread forming screws into the back casting covering the rubber plug.

5. Unscrew the two [2] conduit plugs provided on the side of housing FIG. 3. Screw in the 3/4" conduit.

6. Bring in through wiring from conduit and use provided wire ties to route the wiring in fixture FIG. 3.

7. Follow mounting instructions provided in IMI-697 to complete installation.

FIG. 1

(4) 10-24 x 3/8"

Phillips Pan Head Screws

Lamp

Reﬂector

FIG. 2

Line up these holes

in bracket with two (2)

back casting holes

Once bracket is

line up, drill four (4)

holes into back casting

FIG. 3

(2) Screws in

Conduit Plug

(5) Wire ties for

Thru-Wiring

(2) Wire ties for

Thru-Wiring

Thru-Wire

(provided by others)

(2) Screws in

Conduit Plug

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cooper Lighting Inneneinrichtung Handbücher

Cooper Lighting

Cooper Lighting Interior Wall Luminaire 673 Bedienungsanleitung

Cooper Lighting

Cooper Lighting HALO L2001 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Metalux 471 Bedienungsanleitung

Cooper Lighting

Cooper Lighting METALUX F-BAY 2HBG Series Bedienungsanleitung

Cooper Lighting

Cooper Lighting HALO L2701 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Portfolio M6235T Bedienungsanleitung

Cooper Lighting

Cooper Lighting Metalux DI SERIES Bedienungsanleitung

Cooper Lighting

Cooper Lighting Quantum Series CQA Bedienungsanleitung

Cooper Lighting

Cooper Lighting Portfolio MD6CPxT4 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 482 Bedienungsanleitung

Cooper Lighting

Cooper Lighting HALO SPAN PAR30 Bedienungsanleitung

Cooper Lighting

Cooper Lighting FAIL-SAFE EYELITE 12" Bedienungsanleitung

Cooper Lighting

Cooper Lighting METALUX 248PG Bedienungsanleitung

Cooper Lighting

Cooper Lighting NEO-RAY Series 75 Bedienungsanleitung

Cooper Lighting

Cooper Lighting IRiS E7T Bedienungsanleitung

Cooper Lighting

Cooper Lighting SSIXX Bedienungsanleitung

Cooper Lighting

Cooper Lighting AR7050 Bedienungsanleitung

Cooper Lighting

Cooper Lighting PM613CB Bedienungsanleitung

Cooper Lighting

Cooper Lighting Lumiere 1070 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 601-H Bedienungsanleitung

Cooper Lighting

Cooper Lighting PM112cbi Bedienungsanleitung

Cooper Lighting

Cooper Lighting FAIL-SAFE FMS24LP Bedienungsanleitung

Cooper Lighting

Cooper Lighting NEO-RAY 79-OS Bedienungsanleitung

Cooper Lighting

Cooper Lighting Fail-Safe FWSCR Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung