Coopers J063 Bedienungsanleitung

Exercise Bike J063 Instructions for Use

Please read and retain these instructions for future reference v001: 01/05/20

Dimensions

L70cm xW46cm xH103cm (27˝in x18in x40˝in)

Seat is height adjustable from 66cm to 79cm (26in to 31in).

Weighs 9.8kg (21lb).

Battery required 1x AA (supplied).

Max. weight capacity 110kg (17st 4lb).

Exercise Bike J063 Instructions for Use

Please read and retain these instructions for future reference v001: 01/05/20

Exercise Bike J063 Instructions for Use

Please read and retain these instructions for future reference v001: 01/05/20

ASSEMBLY VIEW

Exercise Bike J063 Instructions for Use

Please read and retain these instructions for future reference v001: 01/05/20

Part List

NO.

Description

QTY

NO.

Description

QTY

Main Frame

Flat washer

Rear Stabilizer

Seat

Front Stabilizer

Pedal(R)

Carriage Bolt

Fixing Bolt

Curved washer

Front Post

Domed Nut

Monitor Holder

(stored in the polystyrene bag

behind the monitor)

Pedal(L)

Monitor

(battery included)

Adjustment Knob

(stored inside separate bag

with monitor holder)

Fixing Bolt

Seat post

Handlebar

M8 lock nut

Tension Control

SPARE PARTS PICTURE:

Exercise Bike J063 Instructions for Use

Please read and retain these instructions for future reference v001: 01/05/20

ASSEMBLY INSTRUCTIONS:

Step 1:

1. Attach the Front Stabilizer (pt.

3) to the Main Frame (pt. 1) using

2 sets of M8 Domed Nuts (pt. 6),

Ø8 Curved Washers (pt.5) and

M8x60mm Carriage Bolts (pt. 4).

Check you put the right stabilizer

on the front and back correctly. As

the washers are curved, washer

they must be flush with the body

that you are attaching.

2. Slide the Rear Stabilizer (pt.2)

into the Main Frame (pt. 1),

making sure the open side of the

bracket is facing up, as shown,

then fix with 4pcs Ø8 Washer (pt.

5), 2pcs M8x60mm Carriage Bolts

(pt. 4).and 2 sets of M8 Domed

Nuts (pt. 6).

Exercise Bike J063 Instructions for Use

Please read and retain these instructions for future reference v001: 01/05/20

Step 2:

Fix the Seat (pt. 12) to the Seat

post by using the three sets of

Washers (pt. 11) and three lock

Nuts (pt. 10) located under the

seat.

Exercise Bike J063 Instructions for Use

Please read and retain these instructions for future reference v001: 01/05/20

Step 3:

Insert the Seat Post (pt. 9) into the

Seat Post housing and line up the

holes (The correct height

adjustment can be made when

the bike is fully assembled) Secure

the seat in position with the

Adjustment Knob (pt. 8).

Step 4:

Remove the bolts from the Front

Post (15). Take the Front Post (15)

and connect the Upper Monitor

Wire with Lower Monitor

Wire(See picture A,B,C).

Put the tension knob on zero –

this will help you get the cable

over the metal buckle and

connect the sensor cable. Then

tighten the nuts up but not too

tight.

Then push down the whole lot in

front post of the main body. Then

connect the 2 sections together

with 4 pcs fixing Bolts (pt. 14) and

Curved washer(pt.5). Be careful

not to cut the sensor wires. Make

sure the curved washers are flush

with the body again.

Exercise Bike J063 Instructions for Use

Please read and retain these instructions for future reference v001: 01/05/20

Step 5:

On the monitor holder there are 2

holes you thread the sensor wire

through any one of the holes. Plug

the Upper Monitor Sensor Wire in to

the back of the Monitor (pt. 17), and

then slide the Monitor onto the

Monitor Holder (pt.16).

Fix Handlebar (pt.19) on the Front by

2 pcs M8*30mm Fixing Bolt (pt.18）

Exercise Bike J063 Instructions for Use

Please read and retain these instructions for future reference v001: 01/05/20

Step 6.

Fix the (L) pedal (pt.7)on the Main

Frame by wrench (13-15 ) in counter

clockwise.

Fix the (R) pedal (pt.13)on the main

frame by wrench in clockwise.

Step 7:

The tension can be adjusted by turning the

knob either to –mark or to + mark.

MONITOR

Exercise Bike J063 Instructions for Use

Please read and retain these instructions for future reference v001: 01/05/20

SCAN: Automatic display of the following

functions in the order shown:

TIME-SPEED-DISTANCE-CALORIES (repeat)

DST: The distance of each workout will be

displayed by pressing MODE key until DST

appears.

SPD：Current speed will be shown by pressing

MODE key until brand SPD (speed) appears.

TMR：The exercise time will be displayed by

pressing MODE key until TMR appears.

CAL :The calories burned will be displayed by

pressing MODE key until CAL appears.

Manual

TIME(TMR)...................................................................00:00-99:59 MIN

SPEED(SPD)...................................................................... 0.0-99.9KM/H

DISTANCE (DST)............................................................... 0.00-999.9KM

CALORIES (CAL)....................................................................0-9999KCAL

Inhaltsverzeichnis

Andere Coopers Heimtrainer Handbücher

Coopers

Coopers 8791 Bedienungsanleitung

Coopers

Coopers 8829 Bedienungsanleitung

Coopers

Coopers 10414 Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Weslo

Weslo Vector 302 Kurzanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung

Stamina

Stamina 15-0340A Bedienungsanleitung