Cornelius ED-250 Bedienungsanleitung

ED250 Dispenser/Ice-O-Matic Kit Installation Instructions

INSTALLATION INSTRUCTIONS

FOR ED250 DISPENSER/ICE-O-MATIC MODEL C106 ICE MAKER

WARNING:

Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the

user. Verify that all the power is off to the unit before performing any work.

Failure to comply could result in serious injury, death or damage to the equipment.

WARNING:

All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or

the equipment manufacturer’s instructions.

Failure to comply could result in serious injury, death or damage to the equipment.

WARNING:

All of the attachment screws and plates must be installed as directed in this manual.

Failure to comply could result in serious injury, death or damage to the equipment.

1. Seal the ice maker to the top of the dispenser as follows (see Figure 1).

A. Locate the outline of the ice maker on the dispenser lid as shown in Figure 1.

B. Run a bead of RTV inside the perimeter of the ice maker outline on the dispenser lid so that the ice

maker sets on the RTV.

C. Set the ice maker onto the lid and position it as shown in Figure 1.

D. Wipe away the excess RTV.

2. Drill 0.136” diameter holes (#29 drill) into the ice maker cabinet and the dispenser lid using the ice maker mount-

ing brackets as templates. Use extreme caution not to drill into any ice maker components (condenser, tubing,

etc.). Secure the brackets using the #10 sheet metal screws, 8 provided.

3. Follow the ice maker manufacturer’s instructions to complete the installation of the ice maker including the bin

thermostat if so equipped or required.

CAUTION:

The bin thermostat location must not interfere with agitator rotation.

4. Secure the manual fill cover in position on the lid over the rear bin access opening with the thumbscrew. Note that

the insulation strip should be compressed against the ice maker cabinet to form a seal with the cover secured in

position.

Table 1. Loose Shipped Parts

Item No. Part No. Name Qty.

1 22127 Bracket, Ice Maker Mounting 2

2 50904 RTV, 3OZ. Tube 1

3 70226 #10 Sheet Metal Screw 8

Release Date: November 5, 2010 www.cornelius.com Revision: B

ED250 Dispenser/Ice-O-Matic Kit Installation Instructions

Figure 1. Dispenser Rear View

Andere Handbücher für ED-250

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cornelius Getränkespender Handbücher

Cornelius

Cornelius ENDURO-150 6 VALVE Bedienungsanleitung

Cornelius

Cornelius 440000902 Bedienungsanleitung

Cornelius

Cornelius FCB VIPER Bedienungsanleitung

Cornelius

Cornelius REMCOR R-134A Beilage

Cornelius

Cornelius ENDURO-150 6 VALVE Bedienungsanleitung

Cornelius

Cornelius CB1522 Bedienungsanleitung

Cornelius

Cornelius A8530 Einrichtungshandbuch

Cornelius

Cornelius NITROPRO MINI Einrichtungshandbuch

Cornelius

Cornelius VIPER 2 FLAVOR Bedienungsanleitung

Cornelius

Cornelius ED 300 BC Bedienungsanleitung

Cornelius

Cornelius ED 250 BCP Bedienungsanleitung

Cornelius

Cornelius Impulse Non-Carbonated Post-Mix Beverage... Bedienungsanleitung

Cornelius

Cornelius JETSPRAY Konfigurationshandbuch

Cornelius

Cornelius ENDURO-150 Bedienungsanleitung

Cornelius

Cornelius Flavorfusion TP01070 Installationsanleitung

Cornelius

Cornelius Jetspray JT20 Einrichtungshandbuch

Cornelius

Cornelius JETSPRAY LT1 Bedienungsanleitung

Cornelius

Cornelius A.B.S. Unit Bedienungsanleitung

Cornelius

Cornelius MILLENNIUM MJ30-4 PB Handbuch

Cornelius

Cornelius 1522 Bedienungsanleitung

Cornelius

Cornelius Agitator Motor 569000207 Bedienungsanleitung

Cornelius

Cornelius IDC 2 Series Bedienungsanleitung

Cornelius

Cornelius 15 Gallon Single-Flavor Visual Display Dispenser... Installationsanleitung

Cornelius

Cornelius Enduro ED-250 BCP Bedienungsanleitung

Beliebte Getränkespender Handbücher anderer Marken

PEGAS

PEGAS Evolution Bedienungsanleitung

Ugolini

Ugolini MT micro Bedienungsanleitung

Bunn

Bunn SLCA-7 Montageanleitung

Gekkeikan

Gekkeikan Sake Machine Bedienungsanleitung

Olympia

Olympia DH709 Bedienungsanleitung

Marco

Marco ECOSMART PB10 Bedienungsanleitung

Marvel

Marvel ML24BN Series Handbuch

Cecilware

Cecilware 2K-GB-LD Handbuch

Sure Vend

Sure Vend 673 Bedienungsanleitung

Nostalgia Electrics

Nostalgia Electrics KEG7000SS Bedienungsanleitung

Bunn

Bunn LCR-3 HV Fehlerbehebungshandbuch

Servend

Servend SV-200 Bedienungsanleitung

EdgeStar

EdgeStar VBR440 Bedienungsanleitung

CDS AUTOMATEN

CDS AUTOMATEN ML-16C2-C Bedienungsanleitung

Siemens

Siemens GA 3000 Gebrauchsanweisung

Selbach

Selbach Fruit Juice dispenser Bedienungsanleitung

Taylor

Taylor C302NP Bedienungsanleitung

Vinotemp

Vinotemp VT-WINEDISP2 Bedienungsanleitung