Costar BLUESTAR 2010 Bedienungsanleitung
Quick Start Guide - ver.2
BLUESTAR 2010
Thank you for purchasing the BLUESTAR 2010 from COSTAR Technologies. You will soon be
using your existing cell phone to communicate hands free using your existing vehicle
electronics.
Installation is easy. Simply follow the steps below, and feel free to contact us at
Step 1: Locate the onstar module in your vehicle. It can be located beneath the rear seat,
behind the glove box, or in the trunk depending on your vehicle. Refer to the COSTAR
Technologies Forum for vehicle specific information.
Step 2: Unplug the onstar module’s white connectors, J1 and J2. In cases where the GMLAN
signal is located on the black J4 connector, it is necessary to wire this signal into the white J1
connector so that the BLUESTAR module can communicate with the radio. Refer to External
GMLAN Connection Application Note.
Step 3: Plug the white connectors into the BLUESTAR 2010.
Step 4: Pair your phone. The passkey / access code for the BLUESTAR is 0000.
Step 5: Adjust volume if necessary. The BLUESTAR module volume can be adjusted by
pressing the RED button to enter ‘Volume Adjust’ mode. You can then use the White and
BLUE buttons to adjust the default volume. You will hear beep tones while doing this. Press
the Red key to save this setting.
Step 6: Press the white key to initiate voice dialing. More detailed information on advanced
features can be found on the website www.costartech.com.
Enjoy the BLUESTAR and feel free to share your experience on our forum particularly if you
have any installation tips or ideas on how to make this product even better.
COSTAR Technologies fully stands behind their product with a complete 60 day satisfaction
guarantee. If you are not 100% satisfied with the BLUESTAR please let us know and we’ll do
everything we can to get you up and running as soon as possible, or your money back.
State Machine Description, Indication and Button Activity
State
Description
LED
Indicator
White
Blue
Red
Reset
Initialization
RED/GREEN
None
None
None
Sleep
Low Power Mode –
Wakes on Vehicle Activity
Off
None
None
None
Standby
Awake, but not active
Flash
GREEN
None
1 second
Go to Linking
Volume
Adjust
3 seconds
Go To Pairing
Pairing
Discoverable mode, for
making new connection
Fast
RED/GREEN
Flash
None
1 second
Go to Standby
None
3 seconds
None
Linking
Attempting to Link to
previously paired Cell
Flash
GREEN fast
None
1 second
Go to Standby
Volume
Adjust
3 seconds
Go To Pairing
Linked
Connected to a cell
GREEN
1 second
Go to Voice Dial
1 second
Go to Standby
Volume
Adjust
3 seconds
Go to Redial
3 seconds
Go To Pairing
Volume
Adjust
Set Volume of BLUESTAR
RED
Volume Down
Volume Up
Save settings
Voice Dial
Initiate Voice Dial
Flash RED
Cancel Voice Dial
None
None
Redial
Last Number Redial
Flash RED
Cancel Redial
None
None
Ringing
Incoming Ring
Flash RED
Answer Call
Transfer Call to
cell (Go to
Standby)
Reject Call
On Call
On Call - Active
Solid RED
Disconnect Call
Transfer Call to
cell (Go to
Standby)
Mute Call
Muted
On Call - Muted
RED/GREEN
None
None
Un-Mute Call
On Hold
Call on Hold
RED/GREEN
None
1-second
Hold Call and
Answer incoming
1-second
Reject
Incoming Call
3-seconds
End Call and
Answer Incoming
3-seconds
Create 3-way
call
Andere Costar Empfänger Handbücher
