CPS G-210 Bedienungsanleitung

Contact Information

Concrete Polishing Solutions

PO Box 520

Norris, TN 37828

877.472.8200

www.go2cps.com

1.0 GENERAL INFORMATION

1.1 Warranty Information

Concrete Polishing Solutions (CPS) warrants to the purchaser that under normal use and

service, the G-210 grinder purchased hereunder shall be free from defects in material and

workmanship for a period of 1 year. Expendable or consumable items or parts are not covered

under this warranty. This warranty does not cover equipment or parts which have been

misused, altered, neglected, handled carelessly, or used for purposes other than which they

have been manufactured. Further, this warranty does not cover loss, damages resulting from

accident, or damages resulting from an unauthorized service

1.2 Return Policy

Please open and inspect your order promptly upon receipt. Should you find an issue with the

contents, please contact a member of the CPS sales and technical staff first, so they can

resolve the issue as quickly as possible.

Any returns must be made within 30 days of delivery and must accompanied by a return

authorization number, as well as a copy of the original invoice. CPS will then review the

complaint and inspect the merchandise before a credit can be processed.

Any items that are returned because of obvious misuse will be shipped back to the sender at

their expense and no credit shall be issued.

Any returned items, including items under warranty, must be sent at the customer’s expense.

No authorization number is necessary if you are returning an item for repair that will be returned

back to you after said repairs.

Before you return an item, CPS asks that you first call a member of the sales and technical staff

at 877.472.8200 and vide your company name, address, telephone number, and a brief

statement explaining the problem.

If an item was delivered to you in error, please let CPS know and the item will be picked up at

CPS’ expense. If your order contains a shortage, report the shortage no later than 24 hours

after receiving your shipment. Shortage claims will be honored only when reported promptly.

CPS cannot accept any products that have been either modified to a customer’s specifications,

or is a non-stocking special order item. Any products, such as machines or other equipment that

sustain aftermarket alterations not pre-approved by CPS are not returnable.

1.3 Damaged Shipments

CPS carefully inspects all orders prior to shipment and then packs shipments as carefully as

possible. CPS advises that you thoroughly check all cartons before you sign for the order. Any

claims for merchandise damaged in transit must be filed with the delivering carrier, not CPS.

1.4 Liability

Important Notice:

The following is made in lieu of all warranties, expressed or implied. CPS and/or

manufacturer’s only obligation shall be to replace such quantity of product proved to be

defective, provided that such guarantees or replacements are a stated policy of the

manufacturer. CPS and/or manufacturers shall not be liable for any injury, loss, or damage

whether direct, incidental, or consequential, arising from the negligence or misuse of the

product. Before using, user shall determine the suitability of the product for its intended use and

the user assumes all risk and liability whatsoever in connection therewith. The foregoing may

not be altered, except by an agreement signed by at least two of the officers of Concrete

Polishing Technologies, Inc. CPS will not be liable for delays in shipping due to circumstance

beyond the control of CPS. Warranties will be null and void if after-market alterations, changes,

or modifications have been made to the equipment.

1.5 Customer Service and 24/7 Technical Support

Concrete Polishing Solutions has a well-trained service department, as well as an exceptional

sales and technical staff, who have extensive knowledge on how to service our equipment.

Being the manufacturer, CPS best understands its equipment and already stock parts to service

equipment. CPS can send you the parts to help you service your own equipment over the

phone. In many locations, CPS can vide the information of a service person in your area who

will be happy to assist you with parts and service.

If you do need to contact the Service Department, you will need to vide the product model and

serial numbers to the person assisting you. You can reach the CPS Service Department 24/7 by

calling 877.472.8200 or via email at info@go2cps.com.

CPS vides technical support to our customers twenty-four hours a day, seven days a week.

Trained representatives will be happy to help you with any questions you may have. Please feel

free to contact CPS any time of day or night for assistance by calling 877.472.8200 or emailing

[email protected].

This operator’s manual vides instruction for safe, trouble-free operation of your machine.

Anyone who will be operating or maintaining your machine are required to read and understand

the information herein.

This manual vides insight into safety messages and controls to help you operate the machine

safely. It also vides answers to specific questions about operation and servicing. There is an

index located in the back of the manual that will assist you in finding information quickly within

this manual.

Owners and operators must keep the owner’s manual available for frequent reference.

Contact CPS for assistance, information, or additional copies of this manual.

1.5.1 Contact Information and Additional Support:

If you are in need of assistance, contact CPS Customer Service, day or night:

By phone: 877.472.8200

By email: [email protected]

For informational videos on CPS equipment, including instructional videos and tips for bidding

and more, visit CPS on YouTube by searching Concrete Polishing Solutions and clicking

‘Subscribe’. Follow us on Facebook at http://www.facebook.com/concretepolishingsolutions.

2.0 SAFETY

This operator’s manual vides instructions for safe, efficient, and trouble-free operation of your

machine. You and anyone else who will be using or maintaining the machine are required to

read and understand the information contained in this manual. Owners and operators must keep

the owner’s manual available for frequent reference. Contact Concrete Polishing Solutions if you

need any assistance, information, or additional copies. The G-210DP machines are designed to

be used by a fessional. The user is expected to have good knowledge and understanding of the

user and safety instructions before operating, inspecting, or adjusting the machine.

2.1 Special Symbols

The symbols below represent a need for extra consideration when using the G-210D Machine.

2.2 Safety Rules

It is imperative to follow all safety instructions herein, as well as ensuring that safety guidelines

are followed by anyone in the vicinity of work being done with the G-210D , along with any

current workplace safety regulations or rules.

Work should only be performed by a trained fessional. Each operator of the machine should be

familiar with the manual and should be aware of the risks of incorrect use or operation.

WARNING

•Training is required before operating this machine.

•Keep machine out of the vicinity of children.

•Do not allow children on or near the machine.

•Those with impaired mental, physical, or sensory

abilities should not operate the machine.

Concrete Polishing Solutions machines should be used only in the manner CPS recommends.

Anyone using the G-210 should know about:

•Machine Functions

•Emergency Stop cedure

•Workplace Safety Rules

The operator of the machine:

•Should ensure that no unauthorized person is in the area when the machine is started.

The workplace:

•Should be suitable to using a grinder, including per ventilation

•Should be free of debris and loose objects that could potentially be thrown out by the

machine

•Should be free of exposed bolts or other implements that could damage the machine or

cause injury.

Personal Protective Equipment (PPE):

•Safety Goggles

•Protective Gloves

•Steel Toe Safety Shoes

•Hearing Protection

•Respiratory Mask

•Do not wear clothing that is loose-fitting, as it could become caught or snagged by the

machine, including scarves, bracelets, or rings.

Precautions:

•Maintenance and service should only be performed by qualified personnel or certified

servicers.

•Access to a clearly marked fire extinguisher should be vided at all times.

•Do not perform maintenance or service on live or operational machines. Machine should

be turned off before any service or maintenance is completed.

3.0 TRANSPORTATION OF YOUR MACHINE

To transport the G-210:

1. Place the handle in the upright position and lock the handle pin.

2. Carefully pull the machine back, using a foot placed on the machine to gain leverage.

3. Transport the machine using the wheels, with the machine tipped back.

3.1 Storage

Store your CPS grinder in an area that is dry. Cold or damp conditions can damage the grinder.

Warning

•Strap down equipment securely (across non-moving parts) when transporting from

jobsite. Unsecure or unanchored equipment can cause property damage, injury, or

death.

•Be sure to place hands in the center of handlebars when lowering and raising the

machine. The placement increases stability and reduces the risk of machine tilting

4.0 MACHINE INFORMATION

Your G-210 machine was carefully inspected and protectively packaged to prevent damage in

shipment. We suggest that upon removing the unit from its carton, you carefully inspect it for

any possible damage in transit. Immediately notify the transportation company who delivered

your machine.

CPS grinders are equipped to handle various types of jobs, including surface preparation,

grinding, and polishing of concrete flooring. The G-210 is equipped with one grinding head upon

which plates and tooling for different applications can be attached. For more information on CPS

tooling visit http://www.go2cps.com/tooling.html

The following items should be included with the delivery of your machine. Please notify CPS if

anything is missing:

1. One (1) G-210D Grinder

2. One (1) Dust Skirt

3. One (1) Operator’s Manual

Power:

Electric

Weight:

300 lbs.

Grinding Width:

21”

Power Required:

Single Phase/220V

Engine:

5 HP

RPM:

Variable

4.1 Machine Diagram

4.2 Control Panel

Reverse

To operate machine in reverse, press button toward REV.

Forward

To operate machine in forward motion, press button toward FWD.

Speed Potentiometer

The speed dial should be started at the lowest setting when starting the machine. Gradually

increase speed to desired rate.

The Emergency Stop Button

The emergency stop button on the 210 is located on the box below and to the right of the control

panel. It is labeled “Emergency Stop”. The emergency stop button must be disengaged before

starting the machine. When stopping the machine, turn the throttle down to lower the RPM and

depress the Emergency Stop button. This button should also be depressed in case of

emergency necessitating stopping the machine

Jog Function

The jog function on the control panel is obsolete.

Inhaltsverzeichnis

Andere CPS Schleifer Handbücher

CPS

CPS g-290 Bedienungsanleitung

Beliebte Schleifer Handbücher anderer Marken

Parkside

Parkside PWS 230 C3 Bedienungsanleitung

SUHNER ABRASIVE

SUHNER ABRASIVE ASC 9 Technisches Handbuch

PTA

PTA P1322 Bedienungsanleitung

Crown

Crown CT13313 Bedienungsanleitung

Parkside

Parkside 280250 Bedienungsanleitung

Climax

Climax VM2150 Series Bedienungsanleitung

Jet

Jet JPSG-618M1 Service-Handbuch

Makita

Makita GA4030 Bedienungsanleitung

DeWalt

DeWalt DWEN202 Bedienungsanleitung

Grizzly

Grizzly G2790 Bedienungsanleitung

Fein

Fein MSf843-1a Bedienungsanleitung

Bosch

Bosch GWS 14,4 V PROFESSIONAL Bedienungsanleitung

RAMSET

RAMSET CBAGR18 Bedienungsanleitung

Bosch

Bosch 8-115 Z Bedienungsanleitung

STEELE PRODUCTS

STEELE PRODUCTS SP-PB008 Bedienungsanleitung

MW TOOLS

MW TOOLS ME15W Bedienungsanleitung

Caravaggi

Caravaggi SP 20 Betriebsanleitung

SUHNER ABRASIVE

SUHNER ABRASIVE UWK 10-R125 Technisches Handbuch