Craftsman 486.24536 Bedienungsanleitung

Owner's Manual

S HITCH

Model No. 486.24536

CAUTION:

Before using this product, read

this manuaU and follow aH Safety

RuUes and

Operating Instructions.

IMPORTANT ° READ THIS FIRST!!!

For Missing Parts or AssembUy Questions

PUease Call 866-576-8388

Mon.-Fd. 7 am -5 pm CST.

FAX 217-728-2032 or e-maiU [email protected]

Missing parts will be sent UPS in 24 hours directly to your home.

,, Safety

,, AssembLy

,, Operation

,, Maintenance

,, Parts

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

www.sea rs.com/craftsman

PRINTED IN USA FORM NO. 49814 (7/05)

MAINTENANCE .......................................................... 6

REPAIR PARTS ILLUSTRATION ................................ 7

REPAIR PARTS UST .................................................. 7

PARTS ORDERING/SERVICE ..................... Back Page

UMITED ONE YEAR WARRANTY ON CRAFTSMAN SLEEVE HITCH

For one year from the date of purchase, when this sleeve hitch is maintained and lubricated according to the operating

and maintenance instructions in the owner's manual, Sears will repair any defect in material or workmanship free of

charge, if this sleeve hitch is used for commercial or rental purposes, this warranty applies for only 90 days from the

date of purchase.

This warranty does not cover repairs necessary because of operator negligence or abuse, including the failure to

maintain the equipment according to instructions contained in the owner's manual

WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPARTMENT

iN THE UNITED STATES.

This warranty applies only while this product is in the United States.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co. D/817 WA. Hoffman Estates, Chicago, IL 60179

Any power equipment can cause injuryif operated improperly or if the user does not understand how to operate the equipment.

Exercise caution at all times, when using power equipment.

Read this owners manual and your vehicle and

implement owners manuals before using this hitch.

Do not a!low children to operate vehicle or sleeve

hitch.

Do not allow adults to operate the vehicle or sleeve

hitch without proper instructions.

Do not allow anyone to ride on sleeve hitch.

Always place sleeve hitch in lowered position when

attaching an implement.

Before lowering and operating the implement, be sure

no one is near the area of operation.

Lower the sleeve hitch and implement when leaving

vehicle unattended.

Vehicle braking and stability may be affected. Drive

slowly when sleeve hitch and implement are in raised

position. Stay off of steep slopes.

Keep aNnuts and bolts tight and be sure the

equipment is in safe operating condition.

Look for this symbol to point out important safety precautions. It means --Attention!! Become

alert!! Your safety is involved°

The model number and serial numbers will be found on

a decal attached to the frame.

You should record both the serial number and the date of

purchase and keep in a safe place for future reference.

MODEL NUMBER:

SERIAL NUMBER:

DATE OF PURCHASE:

486.24536

Thefo!lowingaccessoriesareavailableatmostSearsretailoutlets.

ELECTRICASSISTKiT-MODEL 488.24545

........ j ....

......... i

......... 1 7A

......... t

...... i

.......... i

I .....

L......

I......

4 ....

iLTLL ¸

\\\ J

• Jf

KEY QTY. DESCRIPTION KEY QTY. DESCRiPTiON

A 2 Hex Bolt, 5/8" x 2" J 4 Nylock Nut, 3/8"

B 2 Hex Bolt, 5/8" x 1o3/4" K 4 Hex Nut, 3/8"

C 4 Hex Bolt, 3/8" x 1ol/4" L 4 Lock Washer, 3/8"

D 1 Hex Bolt, 5/16" x 1" M 6 Flat Washer, 3/8"

E 4 Carriage Bolt, 3/8" x 1" N 1 Spacer

F 3 Clevis Pin O 1 Spacer Plate

G 2 Jam Nut, 5/8" P 3 3/32" Hair Cotter Pin

H 2 Nylock Nut, 5/8" Q 1 5/32" Hair Cotter Pin

I 1 Nylock Nut 5/16"

NOTE: Bolt (C), Lock Washer (M) and Nut (H) will not be used unless the mounting holes in the tractor do not already

contain bolts and nuts.

CARTON CONTENTS

1. Sleeve Hitch Frame Assembly

2. Mounting Bracket (R.H.)

3. Mounting Bracket (LH.)

4. Lifting Link Plate

5. Hitch Pin

6. Lift Lever Assembly (with R.H. Pivot Bracket)

7. LH. Pivot Bracket

8. Sleeve Hitch Lift Assembly

TOOLS REQUIRED FOR ASSEMBLY

(1) 1/2" Wrench or Adjustable Wrench

(2) 9/16" Wrenches or Adjustable Wrenches

(1) 15/16" Wrenches or Adjustable Wrenches

Assemble a 5/16" x 1" hex bolt, a spacer and a 5/16"

nylock nut to the three position slot in the R.H. pivot

bracket on the left lever assembly. Use the position

closest to the bend in the bracket (lowest implement

depth setting). See figure 1.

SPACER

PmVOT

5/16" X 1"' BRACKET

HEX BOLT NYLOCK

NUT

Remove the nuts from the two bolts in each side of the

tractor, leaving the bolts in place. See figure 2.

Attach the left (LH) and right (RH) Mounting Brackets

to the bolts using the original nuts and two 3/8" fiat

washers. The brackets should angle outward with the

weld pins at the top of the brackets facing inward. See

Figure 2.

NOTE: If no bolt and nut are present in a hole, use a

3/8" x 1ol/4" hex bolt, 3/8" lock washer and 3/8" hex nut to

attach the Mounting Bracket to the hole.

R.H. MOUNTING

BRACKET

REMOVE NUTS

FROM BOLTS

FLAT WASHER

_(TOP HOLE ONLY) "

\L.H° MOUNTING BRACKET

ORIGINAL NUT

FIGURE 2

FIGURE 1 4

PlacetheL.H.PivotBracketontotheendofthe

LiftLeverAssembly(theR.H.PivotBracketcomes

alreadyinstalledontheassembly).SeeFigure3.

AttachtheR.H.andL.H.PivotBracketstotheSleeve

HitchFrameAssemblyusingfour3/8"x1"carriage

boltsand3/8"nylocknuts.SeeFigure3.

318-16x 1"

CARRIAGE

BOLT

LH. PIVOT BRACKET

R.H. P_VOTBRACKET

LIFT LEVER

ASSEMBLY

3/8" NYLOCK NUT

SLEEVE HmTCHFRAME

FIGURE 3

Assemble the two 5/8" jam nuts halfway onto the two

5/8" x 2" hex bolts. Screw the bolts into the nuts that

are welded to the Sleeve Hitch Lift Assembly. Tighten

the jam nuts against the welded nuts. See figure 5.

Assemble the lifting link to the Sleeve Hitch Lift

Assembly using a 5/8" x 1o3/4" hex bolt and a 5/8"

nylock nut. Use the bottom hole in the lifting link (gives

the lowest implement depth setting). Tighten the nut

only until snug. Do not squeeze the welded arms

together. See figure 3. See figure 5.

LIFTING

518" NYLOCK NUT 5/8"x 1o3/4"

HEX BOLT

5t8" JAM NUT

5/8"× 2"

HEX BOLT

Hook the Sleeve Hitch Frame Assembly onto the weld

pins in the mounting brackets. Attach the bottom of the

Assembly to the tractor hitch using a 5/8" x 1=3/4" hex

bolt and a 5/8" nylock nut. See figure 4.

NOTE: If your tractor hitch has ridges that prevent the

sleeve hitch assembly from resting flat, place the spacer

plate underneath the sleeve hitch assembly.

SLEEVE HTCH

FRAME ASSEMBLY LIFT LEVER

ASSEMBLY

:_L¸ ,

HEXBOLT

5/8" x 1-3/4" ,

FIGURE 5

Attach the Sleeve Hitch Lift Assembly to the Sleeve

Hitch Frame Assembly using three 5/8" x 1o3/4" clevis

pins and 3/32" hair cotter pins as shown in figure 6.

Install the hitch pin in the sleeve hitch and secure it

with the 5/32" hair cotter pin. See figure 6.

;:: HITCH PUN

5/32" HAUR

COTTER PiN

(3) 3132" HAiR

COTTER PINS

(3) CLEVIS PINS

FIGURE 4 FIGURE 6

* Movetheliftleverbackwardtolowerthesleevehitch,

Attachanimplementusingthesleevehitchpin,

Tightenthe5/8"x2"stabilizerboltsagainstthe

implementhitchandthentightenthejamnuts,See

Figure5onPage5,

IMPORTANT:Someimplementsmayrequirethatthe

stabilizerboltsnotbetightened,Refertoyourimplement

owner'smanual,

Thesleevehitchisassembledinthelowestposition

bytheassemblyinstructions,Iftheimplement

attachedtothesleevehitchisnotlevelfronttoback

duringoperation:

a, Movethehexboltintheliftinglinktoahole

(3holesavailable)thatgivesbetterlevelling,

b, Forcloseradjustment,movethehexbolt

assembledinfigure1toapositioninthethree

positionslotthatgivesbetterlevelling,

Totowanimplementthathasatowhitch,simply

removethreeclevispinsandthenremovetheSleeve

HitchLiftAssemblyfromtheSleeveHitchFrame

Assembly,

ToremovetheentireSleeveHitchattachment,remove

the5/8"x1o3/4"hexboltand5/8"ny!ocknutwhich

fastenthebottomofthesleevehitchtothetractor

hitch,thenlifttheattachmentoffthetractor,

* Cleanoffaftereachuse,

* Oilpivotpointsasneeded,

* Storeinadry!ocation,

REPAIR PARTS FOR MODEL 486.24536 SLEEVE HITCH

Ref

\\\\

11 15

Part No.

65409

25715

25714

43350

HA21362

65404

64625

24732

47947

712-0242

HA3980

47951

712-0261

47950

Qty

Description

Sleeve Hitch Frame

Pivot Bracket, L.H.

Pivot Bracket, R.H.

Bolt, Carriage 3/8-16 x 1"

Hex Lock Nut, 3/8-16

Sleeve Hitch Lift Assembly

Lift Lever Assembly

Lifting Link Plate

Bolt, Hex 5/8-11 x 2"

Hex Jam Nut, 5/8-11

Clevis Pin, 5/8" x 1-3/4"

Bolt, Hex 5/8-11 x 1-3/4"

Ny!ock Nut, 5/8-11

Pin, Sleeve Hitch

Ref

}161

}171

}181

}191

}201

}211

!241

}261

}271

}281

}291

} 1

L J

Part No. Qty

43343 3

46471 1

43063 1

23625 1

47810 1

65370 1

65369 1

43070 6

43087 4

43003 4

43015 4

714-0117 1

25685 1

49814 1

\\7

Description

Pin, Hair Cotter 3/32"

Grip, Plastic

Bolt, 5/16-18 x 1"

Spacer

Nylock Nut, 5/16"

Mounting Bracket, LH.

Mounting Bracket, R.H.

Flat Washer

Bolt, Hex 3/8-16 x 1ol/4"

Lock Washer, 3/8"

Hex Nut, 3/8-16

Pin, Hair Cotter, 5/32"

Spacer Plate

Owner's Manual

www.sears.com/partsdirect

To purchase or inquire about a Sears Service Agreement:

1-800-827-6655

Para pedir servicio de reparaci6n a domicilio, Au Canada pour service en frangais:

y para ordenar piezas con entrega a domicilio: 1-877-LE-FOYER sM

1-888-SU-HOGAR sM (1°877°533°6937)

(1-888-784-6427)

HomeCentra[

® Registered Trademark /TMTrademark of Sears Roebuck and Co

Inhaltsverzeichnis

Andere Craftsman Rasen- und Gartengeräte Handbücher

Craftsman

Craftsman 486.24116 Bedienungsanleitung

Craftsman

Craftsman 486.244412 Bedienungsanleitung

Craftsman

Craftsman C944.518321 Bedienungsanleitung

Craftsman

Craftsman 486.24414 Bedienungsanleitung

Craftsman

Craftsman 316.792520 Bedienungsanleitung

Craftsman

Craftsman 19B30005791 Bedienungsanleitung

Craftsman

Craftsman C944.514320 Bedienungsanleitung

Craftsman

Craftsman 3One 917.257562 Bedienungsanleitung

Craftsman

Craftsman 486.244120 Bedienungsanleitung

Craftsman

Craftsman 358.797110 Bedienungsanleitung

Craftsman

Craftsman 25322 Bedienungsanleitung

Craftsman

Craftsman Incredi-Pull 316.794450 Bedienungsanleitung

Craftsman

Craftsman 917.248930 Bedienungsanleitung

Craftsman

Craftsman 45-04381 Bedienungsanleitung

Craftsman

Craftsman 316.792410 Bedienungsanleitung

Craftsman

Craftsman ZT 7000 Bedienungsanleitung

Craftsman

Craftsman 486.24839 Bedienungsanleitung

Craftsman

Craftsman CMXGZBF7124336 Bedienungsanleitung

Craftsman

Craftsman 757 242840 Bedienungsanleitung

Craftsman

Craftsman CompuCarve 183.217540 Bedienungsanleitung

Craftsman

Craftsman 29281 Bedienungsanleitung

Craftsman

Craftsman 320.74900 Bedienungsanleitung

Craftsman

Craftsman 247.24019.1 Bedienungsanleitung

Craftsman

Craftsman BUSHWACKER 517.795670 Bedienungsanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung