Craftsman 917.272241 Bedienungsanleitung

Owner's Manual

JCRHFTSMIIH°J

20.0 HP

ELECTRIC START

48" MOWER

AUTOMATIC

LAWN TRACTOR

Model No.

917.272241

• Safety

•Assembly

•Operation

•Maintenance

•Repair Parts

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equip-

ment.

For answers to your questions

about this product, Call:

1-800-659-5917

Sears Craftsman Help Line

5 am -5pm, Mon- Sat

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Craftsman website: www,sears.com/craftsman

Warranty ............................................... 2

Safety Rules ......................................... 3

Product Specifications .......................... 6

Assembly .............................................. 8

Operation ............................................ 12

Maintenance Schedule ...................... 18

Maintenance ....................................... 18

Service and Adjustments .................... 22

Storage ............................................... 29

Troubleshooting ................................. 30

Repair Parts........................................ 34

Parts Ordering ..................... Back Cover

LIMITED'FWO YEAR WARRANTY ON CRAFTSMAN RIDING EQUIPMENT PARTS

For two (2) years from the date of purchase, if this Craftsman Riding Equipment is

maintained, lubricated and tuned up according to the instructionsin the owner's

manual, Sears will repair or replace, free of charge, any parts found to be defective in

matedal or workmanship. Warranty service is available free of charge by returning

your Craftsman riding equipment to your nearest Sears Service Center. In-home

warranty service is available but a trip charge willapply. This warranty applies only

while this product is in the United States.

ThisWarranty does notcover:

• Expendable items which become worn during normal use, such as blades, spark

plugs, air cleaners, belts and oil filters.

•Tire replacement or repair caused by punctures from outside objects, such as nails,

thorns, stumps, or glass.

•Repairs necessary because of operator abuse, including but not limitedto, damage

caused by towing objects beyond the capability of the dding equipment, impacting

objects that bend the frame or crankshaft, or over speeding the engine.

•Repairs necessary because of operator negligence, including but not limited to,

electdcal and mechanical damage caused by improper storage, failure to use the

proper grade and amount of engine oil,failure to keep the deck clear of flammable

debds, or the failure to maintain the equipment according to the instructions

contained in the owner's manual.

•Engine (fuel system) cleaning or repairs caused by fuel determined to be contami-

nated or oxidized (stale). In general, fuel should be used within thirty(30) days of its

purchase date.

• Riding equipment used for commercial or rental purposes. Aproduct is =used for

commercial purpose" if is used for any purpose other than singlefamily household

dwellingsor in usage where profitis made.

LIMITED 90 DAYWARRANTY ON BATTERY

For ninety (90) days from date of purchase, if any battery included with this dding

equipment proves defective in rnatedal or workmanship and our testing determines

the battery will not hold a charge, Sears will replace the battery at no charge. War-

ranty service is available free of charge by returning your Craftsman dding equipment

to your nearest Sears Service Center. In-home warranty service is available but a trip

charge will apply. This warranty applies only while this product is in the United States.

TO LOCATE THE NEAREST SEARS SERVICE CENTER ORTO SCHEDULE IN-

HOME WARRANTY SERVICE, SIMPLY CONTACT SEARS AT 1-800-4-MY-HOME

This Warranty gives you specific legal dghts, and you may also have other dghts

which may vary from state to state.

Sears, Roebuck and Co., D/817 WA, Hoffman Estates, IL 60179

IMPORTANT:Thiscuttingmachineiscapableofamputatinghandsand feet and

throwing,objects. Failure to observe the followingsafety instructions could result in

sedous injury or death.

I. GENERAL OPERATION

•Read, understand,arid follow all

instructions in the manual and on the

machine beforestarting.

• Only allow responsibleadults,who are

familiarwith the instructions,to operate

the machine.

•Clear the area ofobjectssuch as rocks,

toys,wire, etc., whichcould be picked

up and thrownby the blade.

• Be sure the area isclear of other people

before mowing. Stop machine if anyone

enters the area.

• Never carry passengers.

•Do net mow in reverse unlessabsolutely

necessary. Alwaysleek down and

behind before and while backing.

• Be aware of the mower discharge

directionand do net pointit at anyone.

Do notoperate the mowerwithout either

the entire grosscatcher or the guard in

place,

•Slowdown before tuming.

•Never leave arunning machine

unattended. Always turnoff blades,set

parking brake, stop engine, and remove

keys before dismounting.

•Turn off blades when net mowing.

•Stop engine before removinggrass

catcher or uncloggingchute.

•Mow only in daylightor good artificial

light.

•Do net operate the machine while under

the influenceof alcoholor drugs.

•Watch for trafficwhen operatingnear or

crossing roadways.

•Use extra care when loading or unload-

ingthe machine intoa bailer ortruck.

•Data indicatesthat operators,age 60

years and above, are involvedin a large

percentage of riding mower-related

injuries. These operators should

evaluate their abilityto operate the riding

mower safely enough to protecttbem-

selves and othersfrom seriousinjury.

•Keep machinefl'eeof grass, leavesor

other debris build-upwhichcan touch

bet exhaust/engine parts and bum. Do

net allow the mower deck toplow leaves

or other debris which can cause build-

up to occur. Clean any oilor fuel

spillagebefore operating or storingthe

machine. Allow machine to cool before

storage.

I1.SLOPE OPERATION

Slopes are a majorfactor related toloss--of-

control arid tipoveraccidents,whichcan re-

suit in severe injury or death. All slopes

requireextra caution, ffyou cannotback up

the slope or if you feel uneasy on it, do not

mow it.

DO:

•Mow upand down slopes, net across.

•Remove obstaclessuch as rocks,tree

limbs,etc.

Watch for holes,ruts, or bumps. Uneven

terrain could overtum the machine. Ta//

grass can hide obstacles.

Use slew speed. Choose a low gear so

that youwill nothave to stopor shift

while on the slope.

Follow the manufacturer's recommenda-

tions for wheel weights or counter-

weights to improvestability.

Use extra care with grass catchersor

other attachments. These can change

the stabilityof the machine.

Keep all movement on the slopes slow

and gradual Do notmake sudden

changes in speed or direction.

Avoid startingor stoppingon a dope. ff

tireslose traction, disengagethe blades

and proceed slowly straight downthe

slope.

DO NOT:

•Do not rum on slopes unless necessary,

and then, turnslowlyand gradually

downhill, if possible.

•Do notmow near drop-offs,ditches,or

embankments. The mower could

suddenlyturn over if awheel is over the

edge ofa cliffor ditch, or ifan edge

caves in.

•Do notmow on wet grass. Reduced

traction could cause sliding.

•Do not try to stabilizethe machine by

patting your foot onthe ground.

•Do notuse grass catcheron steep

slopes.

ttt. CHILDREN

Tragic accidents con occur if the operator

is notalert to the presence ofchildren.

Childrenare often attracted to the

machine and the mowing activity. Never

assume that children will remain where

you last saw them.

•Keep children out of the mowing area

and under the watchful core of another

responsible adult.

• Be alert and turn machine off if children

enterthe area,

•Before and when backing, look behind

and down for small children.

•Never carry children. They may fall off

and be seriously injured or interfere

with safe machine operation.

•Never allow children to operate the

machine.

•Use extra core when approaching blind

comers, shrubs, trees, or other objects

that may obscure vision.

IV. SERVICE

• Use extra core in handling gasoline

and other fuels. They are flammable

and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel

with the engine running. Allow

engine to cool before refueling. Do

not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel

container inside where there is an

open flame, such as awater heater.

•Never run amachine inside a close_

area.

• Keep nutsand bolts, especially blac

attachment bolts, tight and keep

equipment in good condition.

•Never tamper with safety devices.

Check their proper operation regula

•Keep machine free of grass, leaves,

other debris build-up. Clean oil or fL

spillage. Allow machine to cool bef¢

stodng.

• Stop and inspect the equipment if y_

strike an object. Repair, if necessar

before restarting.

•Never make adjustments or repairs

with the engine running.

•Grass catcher components are subj

to wear, damage, and deterioration,

which could expose moving parts o=

allow objects to be thrown, Frequel

check components and replace wilt

manufacturer's recommended parts

when necessary.

• Mower blades are sharp and con ct

Wrap the blade(s) or wear gloves, _.

use extra caution when servicingth{

• Check brake operation frequently.

Adjust and service as required.

•Be sure the area isclear of other

peopta before mowing. Stop machine if

anyone enters the area.

•Never carry passengers or children

even with the blades off.

• Do not mow In reverse unless abso-

lutely necessary. Always look down

and behind before andwhile backing.

•Never carry children. They may fall off

and be seriously injured or interfere

with safe machine operation.

• Keep children out of the mowing area

and under the watchful care of another

responsible adult.

• Be alert and tam machine off if chik

enter the area.

•Before and when backing, look beP

and down for small children.

• Mow up and down slopes (15 ° Max

net across.

•Remove obstacles such as rocks, b

limbs,etc.

•Watch for holes, ruts, or bumps.

Uneven terrain could over_urnthe

machine. Tall grass can hide obsta

• Use slow speed. Choose a low gear so

thatyou willnot have to stopor shift

while on the slope,

•Avoid starting or stoppingon a slope. If

tires lose traction,disengage the

blades and proceed slowly straight

down the slope.

•If machine stops while going uphill,

disengage blades, shiftinto reverse

and back down slowly.

•Do not turn on slopes unless neces-

saw, and then, turn slowly and gradu-

ally downhill, if possible.

_Look for this symbol to point out

importantsafety precautions.It means

CAUTIONI!! BECOMEALERT!!I YOUR

SAFETY IS INVOLVED.

_CAUTION: Inorder to prevent

accidental starting when setting up,

transporting, adjusting or making repairs,

always disconnect spark plug wire and

place wire where it cannot contact spark

plug.

,_kCAUTION: Do not coast down a hillin

neutral, you may lose control of the

tractor.

,_CAUTION: Towonlythe attachments

that are recommended by and comply

with specifications of the manufacturer of

your tractor.Use common sense when

towing. Operate only at the lowest

possiblespeed when on a slope. Too

heavy of a load, while on a slope, is

dangerous. Tires can lose traction with

the ground and cause you to lose control

of your tractor.

_WARNING: Engine exhaust, some of

its constituents, and certain vehicle

components contain or emit chemicals

known tothe State of California tocause

cancer and birthdefects or other repro-

ductive harm.

_WARNING: Battery pests, terminals

and related accessodes contain lead and

lead compounds, chemicals known to the

State of California to cause cancer and

birthdefects or other reproductive harm.

Wash hands after handling,

PRODUCTSPECIFICATIONS

GASOLINE 3.5GALLONS

CAPACITY UNLEADED

ANDTYPE: REGULAR

OIL TYPE SAE 10W30

(ABOVE 32°F)

API-SF-SJ): SAE 5W-30

(BELOW 32°F)

OIL CAPACITY: W/FILTER: 4.5 PINTS

W/OFILTER:4.0 PIhITS

SPARK PLUG: CHAMPION RC12YC

GAP: .030")

GROUND SPEED FORWARD: 0-5.5

(MPH): REVERSE: 0-2.4

TIRE PRESSURE: FRONT: 14 PSI

REAR: 10 PSI

CHARGING

SYSTEM: 15 AMPS @ 3600 RPM

BATTERY: AMP/HR: 30

MIN. CCA: 240

CASE SIZE: U1 R

BLADE BOLT 45-55 FT. LBS.

TORQUE:

CONGRATULATIONS on your purchase

ofa new tractor. Ithas been designed,

engineered and manufactured to give you

the best possible dependability and

performance.

Should you expedence any problem you

cannot easily remedy, please contact a

Sears or other qualified service center.

We have competent, well-trained techni-

cians and the proper tools to service or

repair thistractor.

Please read and retain this manual. The

instructionswill enable you to assemble

and maintain your tractor properly.

Always observe the =SAFETY RULES".

REPAIRAGREEMENT

A Repair Agreement is available on this

product. Contactyour nearest Sears

store fordetails.

CUSTOMER RESPONSIBILITIES

• Read and observe the safety rules.

•Follow a regular schedule in maintain-

ing, caring for and using your tractor.

•Follow the instructionsunder "Mainte-

nanco" and "Storage" sections of this

owner's manual.

_iLWARNING: This tractor is equipped

with an internal combustion engine and

should not be used on or near any

unimproved forest-covered, brush-

covered or grass-cevered land unless the

engine's exhaust system is equipped with

aspark arrester meeting applicable local

or state laws (if any). Ifa spark an'ester is

used, it should be maintained in effective

working order by the operator.

In the state of California the above is

required by law (Section 4442 of the

California Public Resoumes Code).

Other states may have similar laws.

Federal laws apply on federal lands. A

spark arrester for the muffler is available

through your nearest Sears service

center (See REPAIR PARTS section of

this manual).

Steering

Wheel insert

Steering Wheel

SteeringSleeve

Seat

(1) Washer

17/32 x 1-3/16 x 12 Gauge

_(1) Knob

Mower

Retainer Springs

)

(2) Retainer Springs (single loop)

(2)Flanged _:_

(1)Front Plate _ " _

10/%,

(4) Adjusting Bar Gauge Wheels i-O_

_(4) Retainer Springs (_

_ _ y__(double loop)

) ) Washers (4) Shoulder Bolt

3/8 x 3/4 x 14 Gm

L J Nose Roller_

L J _ _'#_ Nose Roller

Nose Roller_ _(2(2) Hex Bolts

(2) Locknuts _ 5/tR-1R x t ) Washer

5/16-18 ......... 17/32 x 7/8 x 16 GaW

Video Cassette Keys

12) Keys

For Future Use

Slope Sheet

Yournewtractorhasbeenassembledatthefactorywithexceptionofthose parts left

unassembled for shipping purposes. Toensure safe and proper operation of your

tractor all parts and hardware you assemble must be tightened securely.Use the

correct tools as necessary to insure proper tightness.Review the video cassette before

you begin.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly

easier. Standard wrench sizes you need

are listed below.

(2) 9/16" wrench (1) 3/4" Socket w/

(1) 1/2" wrench drive ratchet

(1) Utility knife (1) Pliers

(1) Tire pressure gauge

When dght or left hand is mentioned in

this manual, it means, from your pointof

view, when you are in the operating

position(seated behind the steering

wheel).

TO REMOVETRACTOR FROM

CARTON

UNPACK CARTON

1. Remove all accessible loose parts

and parts cartons from carton.

2. Cut, from top to bottom, along lines on

all four comers of carton, and lay

panels fiat.

3. Remove mower and packing materi-

als.

4. Check for any additional loose parts

or cartons and remove.

BEFORE REMOVING TRACTOR

FROM SKID

ATTACH STEERING WHEEL

1. Remove Iocknutand large fiat washer

from steering shaft.

2. Positionfront wheels of the tractor so

they are pointing straight forward.

3. Slide the steedng sleeve over the

steedng shaft.

4. Positionsteedng wheel so cross bars

are horizontal (left to right) and slide

onto steedng wheel adapter.

5. Secure steedng wheel to steedng

shaft with Iocknut and large fiat

washer previously removed. Tighten

securely.

6. Snap steering wheel insert into center

of steedng wheel.

7. Remove protective materials from

tractor hood and grill.

IMPORTANT: Check for and remove any

staples in skid that may puncture tires

where tractor isto rolloff skid.

I( )1 - LockNut

__ge FlatWasher

Steering __ _ _)

Wheel_

SteeringWheel

Adapter------'-'-_ _lp

SteeringShaft_ /--_-=_-_-__,-""",_':

Steerln _. .i ,,

Sleeve ,' _ _,÷ 1 '"

HOWTO SET UPYOURTRACTOR

CHECK BATTERY

1. Lift hood to raised position.

NOTE: If thisbattery isput intoservice

after month and year indicated on label

blabellocated between terminals) charge

artery for minimum of one hour at 6-10

amps. (See "BATTERY" in Maintenance

section of this manual for charging

instructions).

"'"'-1::" '{" Label

INSTALl -qEAT

Adjust seat before tightening adjustment

knob.

1. Remove adjustment knob and fiat

washer securing seat to cardboard

packing and set aside for assembly of

seat totractor.

2. Pivotseat upward and remove from

the cardboard packing. Remove the

cardboard packing and discard.

3. Place seat on seat pan so head of

shoulder bolt is positioned over large

8 slotted hole in pan.

4. Pushdownonseattoengage

shoulderbeltinslotandpullseat

towardsrearoftractor.

5. Pivotseat and pan forward and

assemble adjustment knob and fiat

washer loosely. Do not tighten.

6. Lower seat into operating position and

sit in seat.

7. Slide seat until a comfortable position

is reached which allows you to press

clutch/brake pedal all the way down.

8. Get off seat withoutmoving its

adjusted position.

9. Raise seat and tighten adjustment

knob securely. Seat

SeatAdjustmen_tK_FPan __ BSh_ulder

NOTE: You may now roll or drive your

tractor off the skid. Follow the apprepdate

instructionbelowto remove the tractor

from the skid.

TO ROLLTRACTOR OFF SKID (See

Operation section for location and

function of controls)

1. Press liftlever plunger and raise

attachment liftlever to its highest

position.

2. Release parking brake by depressing

brake pedal.

3. Place freewheel control in freewheel-

ing positionto disengage transmis-

sion(See =TOTRANSPORT" inthe

Operation section of this manual).

4. Roll tractor forward off skid.

TO DRIVETRACTOR OFF SKID (See

Operation section for location and

function of controls)

_I_WARNING: Before starting, read,

understand and follow all instructionsin

the Operation section of this manual. Be

sure tractor is in a well-ventilated area. Be

sure the area in front oftractor isclear of

other people and objects.

1. Be sure all the above assembly steps

have been completed.

2. Check e_gine oil level and fill fuel

tank with gasoline.

3. Place freewheel control in '_ransmis-

sion engaged" position.

4. Sit on seat in operating position,

depress brake pedal and set the

parking brake.

5. Press lift lever plunger and raise

attachment liftlever to its highest

position.

6. Start the engine. After engine has

started, move throttle controlto idle

position.

7. Release parking brake.

8. Slowly depress forward ddve pedal

and ddve tractor off skid.

9. Apply brake to stop tractor and set

parking brake.

10.Turn ignitionkey to "OFF" position.

Continue with the instructionsthat follow.

ASSEMBLE GAUGEWHEELSTO

MOWER DECK

The gauge wheels are designed to keep

the mower deck in proper positionwhen

operating mower. Be sure they are

propedy adjusted to ensure optimum

mower performance.

1. Slide gauge wheel bar down into

bracket channel, Be sure that gauge

wheel bar aligning holes are on top.

Assemble gauge wheels as shown

using shoulder belts, 3/8 washers and

3/8-16 center lecknuts and tighten

securely.

2, For ease of mower to tractorassem-

bly, raise gauge wheels to highest

positionand retain with clevis pins

and spdng retainers.

NOTE: Adjustgauge wheels before

operating mower. See "TO ADJUST

GAUGE WHEELS" in the Operation

section of this manual.

Pin-_

Shoulder _..

Bolt Bar

Ga__

3/8 Washerf v _ Locknut

TOATTACHNOSEROLLER

1. Positionbrackets,17/32x7/8x16

gaugewashers,andnoseroller

betweendeckmountingbracketsas

shown.Besuretopositionbrackets

oncorrectside,asshown.

2. Installhexboltsandlocknutsas

shown.Tightenhardwaresecurely.

NOTE:Besurebrackettabsareposi-

tionedintabholesindeckbrackets.

Tab NoseRoller

Lock"B"Bracket

Hex Bolt

Bracket

INSTALL MOWER AND DRIVE BELT

Be suretractorisonlevelsurfaceand mover

suspensionan-nsare raisedwithattachment

liftconlrnl.Engageparld'KJbrake.

1. Cut and remove ties secudng anti-

sway bar and belts. Swing anti-sway

bar to left side of mower deck.

2. Slide mower under tractor with

deflector shield to dght side of tractor.

IMPORTANT: Check belt for proper

routing in all mower pulley grooves.

3. If equipped, turn height adjustment

knob counterclockwise until it stops.

4. Lower mower linkage with attachment

liftcontrol.

5. Be sure belt tension red is in disen-

gaged position. Lock

Belt Tension Rod

Disengaged Position

Gauge

Wheel_

Double Loop

Retainer Spring

Anti-Swa)

USEPLIERSFOR

RL=TAINERSPRINGSSuspension Arms

/_L_p Double Loop Retainer

Spdng (Outward

Up pointing deck pins)

6. Install belt into electric dutch pulley

groove.

7. Place the suspension arms on

outward pointingdeck pins. Retain

with double loop retainer spdng with

loops up as shown.

8. Install front plate assembly totractor

suspension brackets and retain with

single loop retainer spdngs as shown.

9. Positionfront plate assembly between

front mower brackets. Raise deck and

plate assembly to align holes and

insert flanged pins. Secure pins with

double loop retainer spdngs between

the plate assembly and mower

brackets.

NOTE: To assistin locating hole in

flanged pin, the hole in pin is inline with

notch on head of pin. If necessary, move

mower side-to-side to give space

between plate and mower brackets.

IMPORTANT: Check belt forproper

routing in all mower pulley grooves.

10.Engage belt tension rod by pushing

red intolocking bracket.

A,CAUTION: Belt tension rod is spring

loaded. Have a tight gdp on rod and

engage slowly.

11.Connect anti-sway bar to chassis

bracket under left footrestand retain

with double loop retainer spdng.

12.If equipped, turn height adjustment

knob clockwiseto remove slack from

mower suspension.

13. Raise deck to highest position.

14.Adjust gauge wheels before operating

mower as shown in the Operation

sectionof this manual.

Electric Clutch

Pulley Front Suspention Brackets

Front Front Plate Assembly

Mower _Double Loop

Bracket Retainer Springs

Single

Loop

Retainer

Springs

10 Sheild.

Inhaltsverzeichnis

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman EZ 917.387140 Bedienungsanleitung

Craftsman

Craftsman 917.272440 Bedienungsanleitung

Craftsman

Craftsman 333170 Bedienungsanleitung

Craftsman

Craftsman 917.374040 Bedienungsanleitung

Craftsman

Craftsman 917.258492 Bedienungsanleitung

Craftsman

Craftsman 917.377561 Bedienungsanleitung

Craftsman

Craftsman 247.38520 Bedienungsanleitung

Craftsman

Craftsman 917.374551 Bedienungsanleitung

Craftsman

Craftsman 37144 Bedienungsanleitung

Craftsman

Craftsman 917.375920 Bedienungsanleitung

Craftsman

Craftsman 917.377411 Bedienungsanleitung

Craftsman

Craftsman 917.378340 Bedienungsanleitung

Craftsman

Craftsman 944.362640 Bedienungsanleitung

Craftsman

Craftsman 944.362151 Bedienungsanleitung

Craftsman

Craftsman 917.376081 Bedienungsanleitung

Craftsman

Craftsman 917.273756 Bedienungsanleitung

Craftsman

Craftsman 944.361361 Bedienungsanleitung

Craftsman

Craftsman 917.9997A Bedienungsanleitung

Craftsman

Craftsman 917.370690 Bedienungsanleitung

Craftsman

Craftsman 917.273399 Bedienungsanleitung

Craftsman

Craftsman 917.276840 Bedienungsanleitung

Craftsman

Craftsman 28945 - GT 5000 26 HP/54" Garden Tractor Bedienungsanleitung

Craftsman

Craftsman 917.377380 Bedienungsanleitung

Craftsman

Craftsman 917.254520 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung