Craftsman 919.679470 Bedienungsanleitung

• SAFETY GUIDELINES

• ASSEMBLY

• OPERATION

• MAINTENANCE

• TROUBLESHOOTING

• REPAIR PARTS

IMPORTANT:

Read the Safety Guidelines

and All Instructions Carefully

Before Operating

Model No.

919.679470

OWNER'S

MANUAL

Sold by Sears Canada, Inc., Toronto, Ont. M5B2B8

120/240 VOLT • 4750 WATT

GENERATOR

MGP-679470A 1/20/00

2 — ENG

TABLE OF CONTENTS

MAINTENANCE AGREEMENT

The Craftsman Warranty, plus a Maintenance Agreement, pro-

vide maximum value for your Sears products. Contact your

nearest Sears store for details.

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring for and using

your generator.

Follow the instructions under “Customer Responsibilities”

and “Storage” sections of this owner’s manual.

FULL ONE YEAR WARRANTY ON CRAFTSMAN GENERATORS

For one year from the date of purchase, when this Craftsman generator is maintained and operated according to the

instructions in this owner’s manual, Sears will repair, free of charge, any defect in material and workmanship.

If your Craftsman Generator is used for commercial or rental purposes, this warranty applies for only 90 days from the

original date of purchase.

FULL ONE YEAR WARRANTY ON CRAFTSMAN ENGINE

For one year from the date of purchase, when this Craftsman engine is maintained and operated according to the

instructions in this owner’s manual, Sears will repair, free of charge, any defect in material and workmanship.

If your Craftsman engine is used for commercial or rental purposes, this warranty applies only for 90 days form the

date of purchase. This warranty does not cover: Expendable items such as spark plugs and air filters, which become

worn during normal use.

Repairs necessary because of operator abuse or negligence, including damage resulting from no oil being supplied to

the engine or failure to maintain the equipment according to the instructions contained in this owner’s manual, are not

covered under warranty.

WARRANTY SERVICE IS AVAILABLE BY RETURNING THE GENERATOR TO THE NEAREST SEARS SERVICE CENTER.

This warranty gives you specific legal rights and you may also have other rights, which vary from PROVINCE TO

PROVINCE.

Sold by Sears Canada, Inc., Toronto, Ont.

DATE PURCHASED:__________________________

MODEL NO:_________________________________

SERIAL NO: ________________________________

STORE WHERE PURCHASED:_________________

ADDRESS__________________________________

CITY_______________________________________

TELEPHONE:________________________________

Record the above information about your unit

so that you will be able to provide it in case

of loss or theft.

HORSE POWER 10 HP

GASOLINE CAPACITY 7 GALLON

OIL CAPACITY 26 OZ.

Warranty....................................................

Safety Guidelines ...................................

3-8

Assembly ..................................................

Operation..............................................

9-12

Maintenance ......................................

12-14

Service Adjustments ..............................

Storage ...................................................

Troubleshooting Guide ...........................

Parts ..................................................

16-22

EPA Codes ........................................

23-24

How To Order Parts .................

Back Cover

Français

3 — ENG

Attempting to connect generator directly

to the electrical system of any building

structure.

Inadequate electrical grounding of gen-

erator.

Back feeding electricity through a

building’s electrical system to the

outside utility feed lines could en-

danger repair persons attempting to

restore service.

Attempting to connect to the incoming

utility service could result in electrocu-

tion.

Restoration of electrical service while

the generator is connected to the in-

coming utility could result in a fire or

serious damage if an isolator switch is

not installed.

The failure of one of the generator’s

electrical devices, a broken wire, wet

surfaces, etc. could result in the entire

unit becoming electrically charged.

Contact with electrically charged

surfaces could result in electrocution.

Never back feed electricity through a

structure's electrical system.

To connect to a structure's electrical

system in a safe manner and always

have a Double-Throw Transfer Switch

installed by a qualified electrician, in

compliance with local ordinances.

(When installing a Double-Throw

Transfer Switch, a minimum of 10

gauge wiring must be used.)

Make sure that the unit is connected

to an appropriate electrical ground, in

accordance with the requirement of

the National Electric Code. See page

8 for grounding instructions.

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

RISK OF ELECTROCUTION AND FIRE

When using this product basic precautions should always be followed

including the following:

• SAVE THESE INSTRUCTIONS •

IMPORTANT SAFETY INSTRUCTIONS

SAFETY GUIDELINES - DEFINITIONS

URGENT SAFETY INFORMATION - A HAZ-

ARD THAT WILL CAUSE SERIOUS INJURY

OR LOSS OF LIFE.

IMPORTANT SAFETY INFORMATION - A

HAZARD THAT MIGHT CAUSE SERIOUS

INJURY OR LOSS OF LIFE.

Information for preventing damage to

equipment.

Information that you should pay special

attention to.

This manual contains information

that is important for you to know

and understand. This information

relates to protecting YOUR

SAFETY and PREVENTING

EQUIPMENT PROBLEMS. To help

you recognize this information, we

use the symbols to the right.

Please read the manual and pay

attention to these sections.

4 — ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

Operation of generator in rain, wet, icy,

or flooded conditions.

Use of worn damaged, undersized or un-

grounded extension cords.

Placing generator on or against highly

conductive surface, such as a steel walk-

way or metal roof.

Improper connection of items to genera-

tor.

Operation of unit when damaged, or with

guards or panels removed.

Water is an excellent conductor of

electricity! Water which comes in

contact with electricity charged

components can transmit electricity to

the frame and other surfaces, resulting

in electrical shock to anyone contact-

ing them.

Contact with worn or damaged extension

cords could result in electrocution.

Use of undersize extension cords could

result in overheating of the wires or at-

tached items, resulting in fire.

Use of ungrounded cordsets could pre-

vent operation of circuit breakers and re-

sult in electrical shock.

Accidental leakage of electrical current

could charge conductive surfaces in con-

tact with the generator.

Exceeding the load capacity of the gen-

erator by attaching too many items, or

items with very high load ratings to it

could result in overheating of some items

or their attachment wiring resulting in fire

or electrical shock.

Attempting to use the unit when it has

been damaged, or when it is not func-

tioning normally could result in fire or

electrocution.

Removal of guarding could expose elec-

trically charged components and result

in electrocution.

Operate generator in a clean, dry, well

ventilated area. Make sure hands are

dry before touching unit.

Inspect extension cords before use

and replace with new if required.

Use proper size (wire gauge) cordset

for application.

Always use electrically grounded

cordset.

Place generator on low conductivity

surface such as a concrete slab.

Read the load rating chart and instruc-

tions on page 9, 10 and 11. Make sure

that the sum of electrical loads for all

attachments does not exceed the

load rating of the generator.

Do not operate generator with me-

chanical or electrical problem. Have

unit repaired by an Authorized Ser-

vice Center.

Do not operate generator with protec-

tive guarding removed.

RISK OF ELECTROCUTION AND FIRE (cont’d)

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

5 — ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

RISK OF FIRE

Turn engine off and allow it to cool

before adding fuel to the tank. Equip

area of operation with a fire extin-

guisher certified to handle gasoline

or fuel fires.

Add fuel to tank in well ventilated area.

Make sure there are no sources of

ignition near the generator.

Store fuel in a container designed to

hold gasoline. Store container in se-

cure location to prevent use by oth-

ers.

Operate generator in a clean, dry, well

ventilated area a minimum of four feet

from any objects or wall. DO NOT

OPERATE UNIT INDOORS OR IN

ANY CONFINED AREA.

Gasoline and gasoline vapors can

become ignited by coming in contact

with hot components such as the

muffler, engine exhaust gases, or from

an electrical spark.

Cigarettes, sparks, fires, or other hot

objects can cause gasoline or gasoline

vapors to ignite.

Improperly stored fuel could lead to ac-

cidental ignition. Fuel improperly secured

could get into the hands of children or

other unqualified persons.

Materials placed against or near the gen-

erator or operating the generator in ar-

eas where the temperature exceeds 104°

F. ambient can interfere with its proper

ventilation features causing overheating

and possible ignition of the materials.

Attempting to fill the fuel tank while the

engine is running.

Sparks, fire, hot objects

Improper storage of fuel

Inadequate ventilation for generator

Never attempt to “speedup” the en-

gine to obtain more performance.

Both the output voltage and frequency

will be thrown out of standard by this

practice, endangering attachments

and the user.

Use care in filling the tank to avoid

spilling fuel. Make sure fuel cap is

secured tightly and check engine

for fuel leaks before starting engine.

Move generator away from refueling

area or any spillage before starting

engine. Allow for fuel expansion.

Keep maximum fuel level ¼ inch

below the tip of the fuel tank. Never

refuel with the engine running.

Engine speed has been factory set to

provide safe operation. Tampering with the

engine speed adjustment could result in

overheating of attachments and could

cause a fire.

Spilled fuel and its vapors can become

ignited from hot surfaces or sparks.

Tampering with factory set engine speed

settings.

Overfilling the fuel tank – fuel spillage.

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

6 — ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

RISK OF BREATHING - INHALATION HAZARD

Operate generator in clean, dry, well

ventilated area. Avoid enclosed areas

like garages, basements, storage

sheds, etc., which lack a steady ex-

change of air. Never operate unit in a

location occupied by humans or ani-

mals. Keep children, pets and others

away from area of operating unit.

Breathing exhaust fumes will cause se-

rious injury or death.

Gasoline engines produce toxic carbon

monoxide exhaust fumes.

HAZARD HOW TO PREVENT IT

WHAT COULD HAPPEN

Risk of Injury and Property Damage When

Transporting Generator

If generator is equipped with a fuel

shut-off valve, turn the valve to the

off position before transporting to

avoid fuel leaks. If generator is not

equipped with a fuel shut-off valve,

drain the fuel from tank before trans-

porting. Only transport fuel in an CSA

approved container. Always place

generator on a protective mat when

transporting to protect against dam-

age to vehicle from leaks. Remove

generator from vehicle immediately

upon arrival at your destination

Fuel or oil can leak or spill and could

result in fire or breathing hazard, seri-

ous injury or death can result. Fuel or oil

leaks will damage carpet, paint or other

surfaces in vehicles or trailers.

Fire, Inhalation, Damage to Vehicle

Surfaces

HAZARD HOW TO PREVENT IT

WHAT COULD HAPPEN

7 — ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

During operation, touch only the con-

trol surfaces of the generator. Keep

children away from the generator at

all times. They may not be able to

recognize the hazards of this prod-

uct.

Contact with hot surfaces, such as en-

gines exhaust components, could result

in serious burns.

Contact with hot engine and generator

components.

RISK OF HOT SURFACES

• Review and understand all of the

operating instructions and warn-

ings in this manual.

• Become familiar with the operation

and controls of the generator.

Know how to shut it off quickly.

• Equip area of operation with a fire

extinguisher certified to handle

gasoline or fuel fires.

• Keep children or others away from

the generator at all times.

Always use U.L. listed voltage pro-

tector to connect voltage sensitive

appliances (TV, computer, stereo,

etc.). Failure to use a U.L. listed volt-

age surge protector will void the war-

ranty on your generator.

Notice: A multiple outlet strip is not

a surge protector make sure you use

a U.L. listed voltage surge protector.

All sources of energy include the poten-

tial for injury. Unsafe operation or main-

tenance of your generator could lead to

serious injury or death to you or others.

Any gasoline operated household gen-

erator will incur voltage variations caus-

ing damage to voltage sensitive appli-

ances or result in fire.

Operation of generator in careless man-

ner.

Operation of voltage sensitive appliances

without a voltage surge protector.

RISK OF UNSAFE OPERATION

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

RISK OF MOVING PARTS

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

Never operate generator with guard-

ing or cover plates removed. Avoid

wearing loose fitting clothing or jew-

elry which could be caught by mov-

ing parts.

The generator contains parts which ro-

tate at high speed during operation.

These parts are covered by guarding to

prevent injury.

Contact with moving parts can result in

serious injury.

8 — ENG

RISK FROM LIFTING

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

The generator is too heavy to be lifted

by one person. Obtain assistance

from others before you try to move it.

Serious injury can result from attempt-

ing to lift too heavy an object.

Lifting a very heavy object.

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

CAUTION: Read owner’s manual. Do not attempt to

operate equipment until you have read Owner’s

Manual for Safety, Operation, and Maintenance In-

structions.

REMOVE GENERATOR FROM CARTON

•Open carton from top.

•Cut carton along dotted lines.

•Remove all carton inserts.

•Remove generator through opening in carton.

ASSEMBLY

CARTON CONTENTS

• Main Unit

• Owner's Manual

Owner's Manual

Main Generator Unit

•Remove shipping block from under the gen head

by unscrewing the bolt and remove the wood block.

It is very important that this is removed before starting

your generator.

This product is not equipped with a spark arresting muffler. If the product will be used around flammable materials, or on

land covered with materials such as agricultural crops, forest, brush, grass, or other similar items, then an approved spark

arrester must be installed and is legally required in the state of California. It is a violation of California statutes section

130050 and/or sections 4442 and 4443 of the California Public Resources Code, unless the engine is equipped with a spark

arrester, as defined in section 4442, and maintained in effective working order. Spark arresters are also required on some

U.S. Forest Service land and may also be legally required under other statutes and ordinances.

Engine exhaust contains chemicals known, in certain quantities, to cause cancer, birth defects or other reproductive harm.

Read Owner’s Manual. Do not operate equipment until you have read Owner’s Manual for

Safety, Operation, and Maintenance Instructions.

WARNING

9 — ENG

OPERATION

KNOW YOUR GENERATOR

Read this Owner’s Manual and Safety Rules be-

fore operation of your Generator. Compare this

illustration with your generator to familiarize yourself

with the location of various controls and adjustments.

Save the manual for future references.

FUEL TANK-Capacity of 7 US gallons.

CHOKE SWITCH-Lever used to start cold engine.

ENGINE RUN/STOP SWITCH-Sets engine in starting

mode for recoil starter - Stops running engine.

ENGINE OIL FILL- Place where engine oil is poured.

CIRCUIT BREAKER-Each receptacle has a circuit

breaker to protect the generator from overloading.

120 VOLT RECEPTACLES- Used to supply 2350 watts of

electrical power per receptacle for operations. Protected

by 15 amp circuit breaker.

240 VOLT RECEPTACLES- Used to supply 4700 watts

of electrical power per receptacle for operations. Will

only supply 2350 watts each if both receptacles are

being used. Protected by 20 amp circuit breaker.

AIR CLEANER- Includes filter element and foam

pre-cleaner that limits the amount of dirt that enters

the engine.

ENGINE OIL FILL

CHOKE SWITCH

ENGINE RUN/STOP

SWITCH

AIR CLEANER

FUELTANK

120 VOLT RECEPTACLES

CIRCUIT BREAKERS

240 VOLT RECEPTACLES

FUEL CAP

IMPORTANT: Before any attempt to start your generator

be sure to check engine oil (See OPERATION under

Adding Engine Oil on page 11)

GROUNDING THE GENERATOR

This generator should be grounded to help prevent

accidental electrical shock. Shown below is a picture of

the grounding lug supplied on your generator. First, drive

a 3/4" or 1" diameter copper pipe or rod into the ground

close to the generator set. The pipe must penetrate moist

earth. Using #10 gauge wire, connect one end of the wire

into the grounding lug. Next, connect the other end of the

wire to the copper pipe or rod using an approved ground

clamp.

Grounding Lug

10 — ENG

OBTAINING ELECTRICITY FROM

GENERATOR

There are basically two ways to obtain electricity form a

generator:

• Use of extension cords directly form the generator

to the appliance, lights, tools, etc.

• Use of a double-throw transfer switch installed

directly to the main electrical supply outside of the

house.

Extension Cord

When using an appliance or tool at a considerable distance

from the generator, a 3-wire extension cord that has a

3-blade grounding plug and 3-slot receptacle that accepts

the tool’s plug should be used. A cord of adequate size

must be used. A minimum of 12 gauge wire size with at

least a 20 amp draw can be used. When amperage

exceeds 20 amps a 10 gauge wire size should be used.

RECEPTACLES

Your generator is equipped with duplex 120 volt receptacles

and duplex 240 volt receptacles.

The unit is also equipped with a 15 amp circuit breaker for

the 120 volt receptacles and a 20 amp circuit breaker for

the 240 volt receptacles which are provided to protect the

generator against electrical overload. If the circuit breaker

trips, unplug electrical load from receptacle. Let circuit

breaker cool down and then push circuit breaker button to

reset.

GENERATOR CAPACITY

Exceeding the rated capacity of your generator can

result in serious damage to your generator and connected

electrical devices. You should observe the following to

prevent overloading the unit:

• Starting and running wattage requirements must be

calculated to match your generator wattage capacity.

• Resistive load appliances such as light bulbs, TV’s

and microwaves, have the same starting and running

wattage. The wattage used for calculating the capacity

can usually be found on each of these appliances.

Some inductive appliances and tools will list on the motor

name plate, the starting and running voltage and amperage

requirements. Use the following formula to convert voltage

and amperage to wattage:

(Volts X Amp = Watts)

Inductive load appliances and tools such as refrigerators,

air compressors and washers require approximately 2 to

4 times the listed running wattage for starting the equip-

ment. This initial load only lasts for a few seconds on

start-up but is very important when figuring your total

wattage to be used.

NOTE: Always start your largest electric motor first, and

then plug in other items, one at a time.

The guide below is provided to assist you in determining

the appliances and tools that can be run with the wattage

capacity of your generator.

20V 20A

NEMA 5-20R NEMA 6-20R

240V/20V

15 15

20 20

Andere Handbücher für 919.679470

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Tragbarer Generator Handbücher

Craftsman

Craftsman 580.323600 Bedienungsanleitung

Craftsman

Craftsman 919.670030 Bedienungsanleitung

Craftsman

Craftsman 580.329140 Bedienungsanleitung

Craftsman

Craftsman 580.327141 Bedienungsanleitung

Craftsman

Craftsman 580.323601 Bedienungsanleitung

Craftsman

Craftsman 580.328330 Bedienungsanleitung

Craftsman

Craftsman CMXGGAS030730 Bedienungsanleitung

Craftsman

Craftsman 580.329130 Bedienungsanleitung

Craftsman

Craftsman 919.679501 Bedienungsanleitung

Craftsman

Craftsman CMXGGAS030733 Bedienungsanleitung

Craftsman

Craftsman SEARS 919.679580 Bedienungsanleitung

Craftsman

Craftsman 580.327360 Bedienungsanleitung

Craftsman

Craftsman 580.326310 Bedienungsanleitung

Craftsman

Craftsman 580.327122 Bedienungsanleitung

Craftsman

Craftsman 580.329120 Bedienungsanleitung

Craftsman

Craftsman 580.329100 Bedienungsanleitung

Craftsman

Craftsman 919.67937 Bedienungsanleitung

Craftsman

Craftsman CMXGGAS030731 Bedienungsanleitung

Craftsman

Craftsman 919.679470 Bedienungsanleitung

Craftsman

Craftsman 580.675611 Bedienungsanleitung

Craftsman

Craftsman CMXGGAS030729 Bedienungsanleitung

Craftsman

Craftsman 580.327700 Bedienungsanleitung

Craftsman

Craftsman 580.329180 Bedienungsanleitung

Craftsman

Craftsman CMXGIAC2200 Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

evertz

evertz 7700 Series Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung

Wallenstein

Wallenstein GF5000A Bedienungsanleitung

Leroy-Somer

Leroy-Somer LSA 49.1 Bedienungsanleitung

Yamakoyo

Yamakoyo SH2900DX Bedienungsanleitung