Craftsman 919.679500 Bedienungsanleitung

SEARS

OWNER"S

MANUAL

Model No.

919.679500

IMPORTANT:.

Read the Safety Guidelines

and All Instructions Carefull

Before Operating

I(RRFTSMRN]

1201240 VOLT " 5000 WATT

GENERATOR

•SAFETY GUIDELINES

•ASSEMBLY

•OPERATION

•MAINTENANCE

• TROUBLESHOOTING

•REPAIR PARTS

Sold by Sears Canada, Inc., Toronto, Ont. M5B2B8

MGP-_ 7/16199

TABLE OF CONTENTS

Warranty .................................................... 2

Safety Guidelines ................................... 3-8

Assembly ............................................... 8-9

Operation ............................................ 10-13

Maintenance ...................................... 13-15

Service Adjustments ............................o . 15

Storage ................................................... 15

Troubleshooting Guide ........................... 16

Parts .................................................. 17-19

EPA Codes ........................................ 20-21

How To Order Parts ................. Back Cover

Fran_ais ............................................. 27-44

DATE PURCHASED:

MODEL NO:

SERIAL NO:

STORE WHERE PURCHASED:

ADDRESS

CtTY

TELEPHONE:

Record the above information about your unit

so that you wilt be able to provide it in case

of loss or theft

HORSE POWER 10 HP I

GASOLINE CAPACITY 7 GALLON I

OIL CAPACITY 26 OZ.

MAINTENANCE AGREEMENT

The Craftsman Warranty, plus a MaintenanceAgreement, pro-

vide maximum value for your Sears products. Contact your

nearest Sears store for details.

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Followa regular schedule in maintaining, caringfor and using

yourgenerator.

Followthe instructions under "Customer Responsibilities"

and "Storage"sectionsof thisowner's manual.

FULL ONE YEAR WARRANTY ON CRAFTSMAN GENERATORS

For one year from the date of purchase, when this Craftsman generator is maintained and operated

according to the instructions in this owner's manual, Sears will repair, free of charge, any defect in

material and workmanship.

If your Craftsman Generator is used for commercial or rental purposes, this warranty applies for only 90

days from the original date of purchase.

FULL ONE YEAR WARRANTY ON CRAFTSMAN ENGINE

For one year from the date of purchase, when this Craftsman engine is maintained and operated accord-

ing to the instructions in this owner's manual, Sears will repair, free of charge, any defect in material and

workmanship.

If your Craftsman engine is used for commercial or rental purposes, this warranty applies only for 90 days

form the date of purchase. This warranty does not cover: Expendable items such as spark plugs and air

filters, which become worn during normal use.

Repairs necessary because of operator abuse or negligence, including damage resulting from no oil

being supplied tothe engine or failure to maintain the equipment according to the instructions con-

tained in this owner's manual, are not covered under warranty.

WARRANTY SERVICE IS AVAILABLE BY RETURNING THE GENERATOR TO THE NEAREST SEARS

SERVICE CENTER. This warranty gives you specific legal rights and you may also have other rights,

which vary from PROVINCE TO PROVINCE.

Sold by Sears Canada, Inc., Toronto, Ont.

2 -- ENG

SAFETY GUIDELINES - DEFINITIONS

Thismanualcontainsinformationthat

is important for you to know and

understand.This informationrelates

to protecting YOUR SAFETY and

PREVENTING EQUIPMENT

PROBLEMS. Tohelp yourecognize

thisinformation,we usethesymbols

tothe right.Please readthe manual

and payattentiontothesesections.

I A DANGER I

URGENT SAFETY INFORMATION - AHAZ-

ARD THAT WILL CAUSE SERIOUS INJURY

OR LOSS OF LIFE.

I AWARNING I

IMPORTANT SAFETY INFORMATION - A

HAZARD THAT MIGHT CAUSE SERIOUS

INJURY OR LOSS OF LIFE.

I _I_CAUTION I

Information for preventing damage to

equipment.

I NOTE I

Information that you should

pay special attention to,

IMPORTANT SAFETY INSTRUCTIONS

aSAVE THESE INSTRUCTIONS •

When using this product basic precautions should always be followed

including the following:

RISK OF ELECTROCUTION AND FIRE

HAZARD

Attempting to connect generator directly

to the electrical system of any building

structure.

Inadequate electrical grounding of gen-

erator.

WHAT COULD HAPPEN

Back feeding electricitythrough a

building's electrical system to the

outside utilityfeed lines could en-

danger repair persons attemptingto

restoreservice.

Attempting to connect to the incoming

utility service could result in electrocu-

tion.

Restoration of electrical service while

the generator is connected to the in-

coming utilitycould resultin a fire or

serious damage ifa isolatorswitch is

not installed.

The failure ofone of the generator's

electrical devices, abroken wire, wet

surfaces, etc. could result in the entire

unit becoming electrically charged.

Contact with electrically charged

surfaces could result in electrocution.

HOW TO PREVENT IT

Never back feed electricitythrougha

structure's electrical system.

To connect to a structure's electrical

system in a safe manner and always

have a Double-ThrowTransferSwitch

installedby a qualified electrician, in

compliance with local ordinances.

(When installing aDouble-Throw

Transfer Switch, a minimum of 10

gauge wiring must be used.)

Make sure that the unitis connected

toan appropriateelectrical ground, in

accordance with the requirement of

the National ElectricCode. See page

8for groundinginstructions.

3 -- ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

All'EMPTING TO OPERATE GENERATOR.

RISK OF ELECTROCUTION AND FIRE (cont'd)

HAZARD

Operation of generator in rain, wet, icy,

or flooded conditions.

Use of worn damaged, undersized or un-

grounded extension cords.

Placing generator on or against highly

conductive surface, such as a steel walk-

way or metal roof.

Improper connection of items togenera-

tor.

Operation of unitwhen damaged, or with

guards or panels removed.

WHAT COULD HAPPEN

Water is an excellent conductor of

electricity! Water which comes in

contact with electricity charged

components can transmit electricity to

the frame and other surfaces, resulting

in electrical shock to anyone contact-

ing them.

Contact with worn or damaged extension

cords could result in electrocution.

Use of undersize extension cords could

result in overheating of the wires or at-

tached items, resulting in fire.

Use of ungrounded cordsets could pre-

vent operation of circuit breakers and re-

sult in electrical shock.

Accidental leakage of electrical current

could charge conductive surfaces in con-

tact with the generator.

Exceeding the load capacity of the gen-

erator by attaching too many items, or

items with very high load ratings to it

could result in overheating of some items

or their attachment wiring resulting in fire

or electrical shock.

Attempting to use the unit when it has

been damaged, or when it is not func-

tioning normally could result in fire or

electrocution.

Removal of guarding could expose elec-

trically charged components and result

in electrocution.

HOW TO PREVENT IT

Operate generator in a clean, dry,well

ventilated area. Make sure hands are

dry before touching unit.

Inspect extension cords before use

and replace with new if required.

Use proper size (wiregauge) cordset

for application.

Always use electrically grounded

cordset.

Place generator on low conductivity

surface such as a concrete slab.

Read the load rating chart and instruc-

tions on page 9, 10and 11.Make sure

that the summation of electrical loads

for all attachments does not exceed

the load rating of the generator.

Do not operate generator with me-

chanical or electrical problem. Have

unit repaired by an Authorized Ser-

vice Center.

Do not operate generator with protec-

tive guarding removed.

4 -- ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE (_ENERATOR.

RISK OF FIRE

HAZARD

Attempting to fill the fuel tank while the

engine is running.

Sparks, fire, hot objects

Improper storage of fuel

Inadequate ventilation for generator

Tampering with factory set engine speed

settings.

Overfilling the fuel tank -fuel spillage.

WHAT COULD HAPPEN

Gasoline and gasoline vapors can

become ignited by coming in contact

with hot components such as the

muffler, engine exhaust gases, or from

an electrical spark.

Cigarettes, sparks, fires, or other hot

objects can cause gasoline or gasoline

vapors to ignite.

Improperly stored fuel could lead to ac-

cidental ignition. Fuel impropedy secured

could get into the hands of children or

other unqualified persons.

Materials placed against or near the gen-

erator or operating the generator in ar-

eas where the temperature exceeds 104°

F. ambient can interfere with its proper

ventilation features causing overheating

and possible ignition of the materials.

Engine speed has been factory set to

provide safe operation. Tampering with the

engine speed adjustment could result in

overheating of attachments and could

cause a fire.

Spilled fuel and itsvapors can become

ignited from hot surfaces or sparks.

HOWTO PREVENTIT

Turn engine off and allow it to cool

before addingfuel to the tank. Equip

area of operation with a fire extin-

guisher certified to handle gasoline

or fuel fires.

Add fuel totank inwell ventilated area.

Make sure there are no sources of

ignition near the generator.

Store fuel in acontainer designed to

hold gasoline. Store container in se-

cure location to prevent use by oth-

ers.

Operate generator in a c_ean,dry,well

ventilated area a minimum of four feet

from any objects or wall. DO NOT

OPERATE UNIT INDOORS OR IN

ANY CONFINED AREA.

Never attempt to "speedup" the en-

gine to obtain more performance.

Both theoutput voltage and frequency

will be thrown out of standard bythis

practice, endangering attachments

and the user.

Use care in filling the tank to avoid

spilling fuel. Make sure fuel cap is

secured tightly and check engine

for fuel leaks before starting engine.

Move generator away from refueling

area or any spillage before starting

engine. Allow for fuel expansion.

Keep maximum fuel level ',/,inch

below the tip of the fuel tank. Never

refuel with the engine running.

5 -- ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

Risk of Injury and ProDertv Damage When

Transporting Generator

HAZARD

Fire, Inhalation, Damage to Vehicle

Surfaces

WHAT COULD HAPPEN

Fuel or oil can leak or spill and could

result in fire or breathing hazard, seri-

ous injury or death can result. Fuel or oil

leaks will damage carpet, paint or other

surfaces in vehicles or trailers.

HOW TO PREVENT IT

If generator is equipped with a fuel

shut-off valve, turn the valve to the

off position before transporting to

avoid fuel leaks. If generator is not

equipped with a fuel shut-off valve,

drain the fuel from tank before trans-

porting. Only transport fuel in an CSA

approved container. Always place

generator on a protective mat when

transporting to protect against dam-

age to vehicle from leaks. Remove

generator from vehicle immediately

upon arrival at your destination

RISK OF BREATHING - INHALATION HAZARD

HAZARD

Gasoline engines produce toxic carbon

monoxide exhaust fumes.

WHAT COULD HAPPEN

Breathing exhaust fumes will cause se-

rious injury or death.

HOW TO PREVENT IT

Operate generator in clean, dry, well

ventilated area. Avoid enclosed areas

like garages, basements, storage

sheds, etc., which lack asteady ex-

change of air. Never operate unit in a

location occupied by humans or ani-

mals. Keep children, pets and others

away from area of operating unit.

6 -- ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

RISK OF UNSAFE OPERATION

HAZARD

Operation of generator in careless

manne[

Operationof voltage sensitive appliances

withoutavoltage surge protecto[

WHAT COULD HAPPEN

All sources of energy include the poten-

tial for injury. Unsafe operation or main-

tenance of your generator could lead to

serious injury or death to you or others.

Any gasoline operated household gen-

erator will incur voltage variations caus-

ing damage to voltage sensitive appli-

ances or result in fire.

HOW TO PREVENT IT

• Review and understandaUof the

operating instructions and warn-

ings in this manual.

• Become familiar with the operation

and controls of the generator.

Know how to shut it offquickly.

•Equip area of operation with a fire

extinguisher certifiedto handle

gasoline or fuel fires.

• Keep children or others away from

the generator at all times.

Always use U.L listed voltage pro-

tector to connect voltage sensitive

appliances (TV, computer, stereo,

etc.). Failure to use a U.L listed volt-

age surge protector will void the war-

ranty on your generator.

Notice: Amultiple outletstrip is not

asurge protector make sureyou use

a U.L. listed voltage surge protector.

RISK OF HOT SURFACES

HAZARD

Contact with hot engine and generator

components.

HAZARD

act with moving parts can result in

serious injury.

WHAT COULD HAPPEN

Contact with hot surfaces, such as en-

gines exhaust components, could result

in serious burns.

HOW TO PREVENT IT

Dudngoperation, touch only thecon-

trot surfaces of the generator. Keep

children away from the generator at

all times. They may not be able to

recognize the hazards of this prod-

uct.

RISK OF MOVING PARTS

WHAT COULD HAPPEN

The generator contains parts which ro-

tate at high speed during operation.

These parts are covered byguarding to

prevent injury.

HOW TO PREVENT IT

Never operate generator withguard-

ing or cover plates removed. Avoid

wearing loose fitting clothingor jew-

elry which could be caught by mov-

ing parts.

7 -- ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

y, RISK FROM LIFTING

HAZARD

Lifting a very heavy object.

WHAT COULD HAPPEN

Serious injury can result from attempt-

ing to lift too heavy an object.

HOW TO PREVENT IT

The generator istoo heavy to be lifted

by one person. Obtain assistance

from others before you try to move it.

CARTON CONTENT, _

• Main Unit

• Owner's Manual

• Wheels

• Handle

• Wheel Bracket Bracket

OwnerJs Manual __Wheels Handle

CAUTION: Read owner's manual. Do not attempt to

operate equipment until you have read Owner's Manual

for Safety, Operation, and Maintenance Instructions.

REMOVE GENERATOR FROM CARTON

• Open carton from top.

• Cut carton along dotted lines.

•Remove all carton inserts.

•Remove generator through opening in carton.

• Remove shipping block from under the gen head

by unscrewing the bolt and remove the wood block.

It is very important that this is removed before starting

your generator.

IIMPORTANT: Before any attempt to start your generator

be sur_ to check engine oil (See OPERATION under

Adding Engine Oil on page 12.)

GROUNDING THE GENERATOR

This generator should be grounded to help prevent

accidental electrical shock. Shown below is a picture of

the grounding lug supplied on your generator. First, drive

a 3/4" or 1" diameter copper pipe or rod into the ground

close to the generator set. The pipe must penetrate moist

earth. Using #10 gauge wire, connect one end of the wire

into the grounding lug. Next, connect the other end of the

wire to the copper pipe or rod using an approved ground

clamp.

Grounding Lug

8 -- ENG

INSTALLING WHEEL KIT

The Sears Wheel Kit was designed to greatly improve

the portablility of your generator. You will need (2) 1/2"

wrenches and (2) 9/16" wrenches.

• Place two 4"x4" pieces of wood on the floor. With

another person helping, carefully lift the generator and

place on top of the wood supports. This will support

the weight of the gasoline engine and generator while

the wheels, brackets, and handle are installed. Also, it

will allow access to the underside of the generator for

hardware installation. Fuel tank should be drained

prior to installation. Make sure that the generator is

supported evenly, level and will not fall.

•Place a handle cap (7) onto each end of handle prior

to installation.

•The handle should be installed on the electrical outlet

end of the generator. Place one washer (12) on long

cap screws (11). Align the handle brackets with the

upper holes pre-drilled in the generator frame. Place

mentioned screws through frame and handle brackets.

Secure with lock nuts (8) and tighten.

Locate the engine support. Place one wheel bracket

(4) on top of support as shown in illustration below.

Align with the pre-ddlled holes insupport. Place 2

cap screws (9) through holes in bracket and support.

Secure with 2 lock nuts (8) and tighten.

Insert one shoulder bolt (2) into wheel (1). insert

threaded end of bolt through wheel bracket, secure

with lock nut (3) and tighten. Note: The wheel will

not rub frame if installed property.

•Repeat the above steps for the oppposite side.

•insert the threaded stud of rubber foot (10) through

the middle hole of the foot bracket (5). Secure with

lock nut (8) and tighten.

Locate the support under the electrical outlet end of

the generator. Position foot bracket (5), with rubber

foot installed, under the support and align the holes

in the foot bracket (5) with the slots in the support.

Place one cap screw (9) through each slot inthe

support and the holes in the foot bracket. Secure

with the lock nuts (8) and tighten.

Once completed, the wheel kit isready for use.

This portability kit includes the following parts:

Key

No. Descrh_tion ARTp_AR_T_r_.

1 Wheel (2 used) AC-0014

2 Shoulder Bolt (2 used) CAC-60

3 Lock Nut 3/8"-16 (2 used) SSF-8111-ZN

4 Wheel Bracket (2 used) GS-0551

5 Foot Bracket GS-0562

6 Handle GS-0563

7 Handle Cap (2 used) GS-0555

8 Lock Nut 5/16"-18 (9 used) SSF-6150

9 Cap Screw 5/16"-18 x 3/4"

(7 used) SS-12-CD

10 Isolator Foot GS-0587

11 Cap Screw 5/16-18 x 1.75"

(2 used) SSF-999-1

12 Washer (2 used) SS-6506-CD

2 8

9-- ENG

KNOW YOUR GENERATOR

Read this Owner's Manual and Safety Rules be-

fore operation of your Generator. Compare this

illustration with your generator to famUiarizeyourself

with the locationofvarious controls and adjustments.

Save the manual for future references.

FUEL TANK- Capacity of 7US gallons.

CHOKE SWITCH- Lever used to start cold engine.

ENGINE RUN/STOP SWITCH- Sets engine in starting

mode for recoil starter -Stops runningengine.

ENGINE OIL FILL- Place where engine oilis poured.

CIRCUIT BREAKER- Each receptacle hasa circuit

breakerto protect the generator from overloading.

120 VOLT RECEPTACLES- Used to supply 1800 watts of

electrical power per receptacle or a combination of 3600

watts on the 120 sidefor operations. Protected by15 amp

circuit breaker.

240 VOLT TWISl"LOCK RECEPTACLE- Used to

supply 5000 watts of electrical power per receptacle for

operations. Protected by 20 amp circuit breaker.

AIR CLEANER- Includes filterelement and foam

pre-cleaner that limits the amount of dirt that enters

the engine.

FUELCAP

FUELTANK

ENGINE RUN/STOP

SWITCH

120VOLTRECEPTACLES

ENGINE OIL FILL

10 -- ENG

Andere Handbücher für 919.679500

Inhaltsverzeichnis

Andere Craftsman Tragbarer Generator Handbücher

Craftsman

Craftsman 580.326301 Bedienungsanleitung

Craftsman

Craftsman 580.326300 Bedienungsanleitung

Craftsman

Craftsman 580.675611 Bedienungsanleitung

Craftsman

Craftsman 580.325650 Bedienungsanleitung

Craftsman

Craftsman 580.328300 Bedienungsanleitung

Craftsman

Craftsman CMXGGAS030791 Bedienungsanleitung

Craftsman

Craftsman DELUXE 580.327071 Bedienungsanleitung

Craftsman

Craftsman 580.327203 Bedienungsanleitung

Craftsman

Craftsman 580.323610 Bedienungsanleitung

Craftsman

Craftsman 580.325600 Bedienungsanleitung

Craftsman

Craftsman 919.679470 Bedienungsanleitung

Craftsman

Craftsman 919.679501 Bedienungsanleitung

Craftsman

Craftsman 580.323300 Bedienungsanleitung

Craftsman

Craftsman 580.675610 Bedienungsanleitung

Craftsman

Craftsman 919.679580 Bedienungsanleitung

Craftsman

Craftsman 580.323601 Bedienungsanleitung

Craftsman

Craftsman 580.327122 Bedienungsanleitung

Craftsman

Craftsman 919.679500 Bedienungsanleitung

Craftsman

Craftsman 580.327203 Bedienungsanleitung

Craftsman

Craftsman 580.327360 Bedienungsanleitung

Craftsman

Craftsman CMCB002 Bedienungsanleitung

Craftsman

Craftsman 580.327140 Bedienungsanleitung

Craftsman

Craftsman 580.326720 Bedienungsanleitung

Craftsman

Craftsman 580.323600 Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

evertz

evertz 7700 Series Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung

Wallenstein

Wallenstein GF5000A Bedienungsanleitung

Leroy-Somer

Leroy-Somer LSA 49.1 Bedienungsanleitung

Yamakoyo

Yamakoyo SH2900DX Bedienungsanleitung