Craftsman 919.670070 Bedienungsanleitung

• SAFETY GUIDELINES

• ASSEMBLY

• OPERATION

• MAINTENANCE

• TROUBLESHOOTING

• REPAIR PARTS

IMPORTANT:

Read the Safety Guidelines

and All Instructions Carefully

Before Operating

Model No.

919.670070

OWNER'S

MANUAL

Sold by Sears Canada, Inc., Toronto, Ont. M5B2B8

120/240 VOLT • 7000 WATT

GENERATOR

MGP-670070 Rev 0 12/10/99

2 — ENG

MGP-670070

TABLE OF CONTENTS

Warranty ..................................................... 2

Safety Guidelines....................................3-8

Assembly............................................... 9-12

Operation ............................................13-17

Maintenance ....................................... 17-20

Service Adjustments ............................... 20

DATE PURCHASED:

MODEL NO:

SERIAL NO:

STORE WHERE PURCHASED:

ADDRESS:

CITY:

TELEPHONE:

Record the above information about your unit

so that you will be able to provide it in case of

loss or theft.

Storage ..................................................... 20

Troubleshooting Guide............................ 21

Emissions Statement .............................. 22

Generator Parts ..................................23-29

Engine Parts .......................................30-36

How To Order Parts.................. Back Cover

FULL ONE YEAR WARRANTY ON CRAFTSMAN GENERATORS

For one year from the date of purchase, when this Craftsman generator is maintained and operated accord-

ing to the instructions in this owner’s manual, Sears will repair, free of charge, any defect in material and

workmanship.

If your Craftsman Generator is used for commercial or rental purposes, this warranty applies for only 90

days from the original date of purchase.

FULL ONE YEAR WARRANTY ON CRAFTSMAN ENGINE

For one year from the date of purchase, when this Craftsman engine is maintained and operated according

to the instructions in this owner’s manual, Sears will repair, free of charge, any defect in material and

workmanship.

If your Craftsman engine is used for commercial or rental purposes, this warranty applies only for 90 days

form the date of purchase. This warranty does not cover: Expendable items such as spark plugs and air

filters, which become worn during normal use.

Repairs necessary because of operator abuse or negligence, including damage resulting from no oil being

supplied to the engine or failure to maintain the equipment according to the instructions contained in

this owner’s manual, are not covered under warranty.

WARRANTY SERVICE IS AVAILABLE BY RETURNING THE GENERATOR TO THE NEAREST SEARS SER-

VICE CENTER. This warranty gives you specific legal rights and you may also have other rights, which vary

from PROVINCE TO PROVINCE.

Sold by Sears Canada, Inc., Toronto, Ont.

MAINTENANCE AGREEMENT

The Craftsman Warranty, plus a Maintenance Agreement,

provide maximum value for your Sears products. Con-

tact your nearest Sears store for details.

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring for and

using your generator.

Follow the instructions under “Customer Responsibili-

ties” and “Storage” sections of this owner’s manual.

HORSE POWER 14 HP

GASOLINE CAPACITY 7 GALLON/26.5 LITERS

OIL CAPACITY 48 OZ./1.4 LITERS

3 — ENG MGP-670070

CAUTION indicates a potentially hazardous situation

which, if not avoided, may result in minor or moderate

injury.

This manual contains information that is important for you to know and understand. This information relates to

protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information,

we use the symbols to the right. Please read the manual and pay attention to these sections.

DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious

injury.

CAUTION used without the safety alert symbol indicates a

potentially hazardous situation which, if not avoided, may

result in property damage.

WARNING indicates a potentially hazardous situation

which, if not avoided, could result in death of serious

injury.

SAFETY GUIDELINES - DEFINITIONS

This product is not equipped with a spark arresting muffler. If the product will be used around flammable

materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or other similar items,

then an approved spark arrester must be installed and is legally required in the state of California. It is a violation

of California statutes section 130050 and/or sections 4442 and 4443 of the California Public Resources Code,

unless the engine is equipped with a spark arrestor, as defined in section 4442, and maintained in effective

working order. Spark arresters are also required on some U. S. Forest service land and may also be legally

required under other statutes and ordinances.

This product may contain chemicals known to the state of California to cause cancer, birth

defects, or other reproductive harm. This warning is given in compliance with California Proposition 65, as

detectable amounts of chemicals subject to proposition 65 may be contained in this product.

Attempting to connect generator di-

rectly to the electrical system of any

building structure.

Back feeding electricity through a

building’s electrical system to the

outside utility feed lines could en-

danger repair persons attempting to

restore service.

Attempting to connect to the incom-

ing utility service could result in

electrocution.

Restoration of electrical service while

the generator is connected to the in-

coming utility could result in a fire or

serious damage if a isolator switch is

not installed.

Failure to use a double throw transfer

switch when connecting to a struc-

tures electrical system can damage

appliances and WILL VOID the

manufacturers warranty.

Never backfeed electricity through

a structure's electrical system.

To connect to a structure's electri-

cal system in a safe manner,

always have a Double-Throw

Transfer Switch installed by a

qualified electrician and in compli-

ance with local ordinances. (When

installing a Double-Throw

Transfer Switch, a minimum of

10 gauge wiring must be used.)

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

RISK OF ELECTROCUTION AND FIRE

When using this product basic precautions should always be

followed including the following:

• SAVE THESE INSTRUCTIONS •

IMPORTANT SAFETY INSTRUCTIONS

4 — ENG

MGP-670070

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

Operation of generator in rain, wet,

icy, or flooded conditions.

Use of worn damaged, undersized

or ungrounded extension cords.

Placing generator on or against

highly conductive surface, such as

a steel walkway or metal roof.

Improper connection of items to

generator.

Operation of unit when damaged, or

with guards or panels removed.

Water is an excellent conductor of elec-

tricity! Water which comes in contact

with electrically charged components

can transmit electricity to the frame and

other surfaces, resulting in electrical

shock to anyone contacting them.

Contact with worn or damaged exten-

sion cords could result in electrocution.

Use of undersize extension cords could

result in overheating of the wires or at-

tached items, resulting in fire.

Use of ungrounded cordsets could pre-

vent operation of circuit breakers and

result in electrical shock.

Accidental leakage of electrical current

could charge conductive surfaces in

contact with the generator.

Exceeding the load capacity of the gen-

erator by attaching too many items, or

items with very high load ratings to it

could result in overheating of some

items or their attachment wiring result-

ing in fire or electrical shock.

Attempting to use the unit when it has

been damaged, or when it is not func-

tioning normally could result in fire or

electrocution.

Removal of guarding could expose

electrically charged components and

result in electrocution.

Operate generator in a clean, dry,

well ventilated area. Make sure

hands are dry before touching unit.

Inspect extension cords before use

and replace with new cord if re-

quired.

Use proper size (wire gauge) cordset

for application see chart in the As-

sembly section of this manual.

Always use a cordset having a

grounding wire with an appropriate

grounding plug. DO NOT use an

ungrounded plug.

Place generator on low conductiv-

ity surface such as a concrete

slab.

ALWAYS operate generator a

minimum of six feet from any

conductive surface.

Read the load rating chart and in-

structions in the Wattage Calcula-

tion section. Make sure that the

summation of electrical loads for all

attachments does not exceed the

load rating of the generator.

Do not operate generator with me-

chanical or electrical problem. Have

unit repaired by an Authorized Ser-

vice Center.

Do not operate generator with pro-

tective guarding removed.

RISK OF ELECTROCUTION AND FIRE (cont’d)

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

5 — ENG MGP-670070

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

RISK OF FIRE

Turn engine off and allow it to cool

before adding fuel to the tank.

Equip area of operation with a fire

extinguisher certified to handle

gasoline or fuel fires.

Add fuel to tank in well ventilated

area. Make sure there are no

sources of ignition near the

generator.

Store fuel in a OSHA approved

container designed to hold gaso-

line. Store container in secure

location to prevent use by others.

Operate generator in a clean, dry,

well ventilated area a minimum of

four feet from any building, object

or wall. DO NOT OPERATE UNIT

INDOORS OR IN ANY CON-

FINED AREA.

Gasoline and gasoline vapors can

become ignited by coming in contact

with hot components such as the

muffler, engine exhaust gases, or from

an electrical spark.

Cigarettes, sparks, fires, or other hot

objects can cause gasoline or gaso-

line vapors to ignite.

Improperly stored fuel could lead to

accidental ignition. Fuel improperly

secured could get into the hands of

children or other unqualified persons.

Materials placed against or near the

generator or operating the generator

in areas where the temperature

exceeds 104° F. ambient (such as

storage rooms or garages) can

interfere with its proper ventilation

features causing overheating and

possible ignition of the materials or

buildings.

Attempting to fill the fuel tank while

the engine is running.

Sparks, fire, hot objects

Improper storage of fuel

Inadequate ventilation for genera-

tor

Never attempt to “speed-up” the

engine to obtain more perfor-

mance. Both the output voltage

and frequency will be thrown out

of standard by this practice,

endangering attachments and the

user.

Use care in filling the tank to avoid

spilling fuel. Make sure fuel cap is

secured tightly and check engine

for fuel leaks before starting

engine. Move generator away

from refueling area or any spillage

before starting engine. Allow for

fuel expansion. Keep maximum

fuel level ¼ inch below the tip of

the fuel tank. Never refuel with the

engine running.

Engine speed has been factory set to

provide safe operation. Tampering

with the engine speed adjustment

could result in overheating of attach-

ments and could cause a fire.

Spilled fuel and its vapors can be-

come ignited from hot surfaces or

sparks.

Tampering with factory set engine

speed settings.

Overfilling the fuel tank –

fuel spillage.

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

6 — ENG

MGP-670070

READ AND UNDERSTAND ALL WARNINGS BEFORE

RISK OF BREATHING - INHALATION HAZARD

Operate generator in clean, dry,

well ventilated area. Never

operate unit in enclosed areas

such as garages, basements,

storage, sheds, or in any location

occupied by humans or animals.

Keep children, pets and others

away from area of operating unit.

Breathing exhaust fumes will cause

serious injury or death.

Gasoline engines produce toxic

carbon monoxide exhaust fumes.

HAZARD HOW TO PREVENT IT

WHAT COULD HAPPEN

Risk of Injury and Property Damage When

Transporting Generator

If generator is equipped with a fuel

shut-off valve, turn the valve to the

off position before transporting to

avoid fuel leaks. If generator is not

equipped with a fuel shut-off valve,

drain the fuel from tank before

transporting. Transport fuel only in

an OSHA approved container.

Always place generator on a

protective mat when transporting

to protect against damage to

vehicle from leaks. Remove

generator from vehicle immedi-

ately upon arrival at your destina-

tion

Fuel or oil can leak or spill and could

result in fire or breathing hazard,

serious injury or death can result. Fuel

or oil leaks will damage carpet, paint

or other surfaces in vehicles or

trailers.

Fire, Inhalation, Damage to Vehicle

Surfaces

HAZARD HOW TO PREVENT IT

WHAT COULD HAPPEN

7 — ENG MGP-670070

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

• Review and understand all of

the operating instructions and

warnings in this manual.

• Become familiar with the

operation and controls of the

generator. Know how to shut it

off quickly.

• Equip area of operation with a

fire extinguisher certified to

handle gasoline or fuel fires.

• Keep children or others away

from the generator at all times.

Always use a U.L. listed voltage

sensitive surge protector to

connect voltage sensitive appli-

ances such as TV, computer, or

stereo equipment. Failure to use

a U.L. listed voltage surge

protector will void the warranty

on your generator.

Notice: A multiple outlet strip is

not a surge protector make sure

you use a U.L. listed voltage surge

protector.

All sources of energy include the

potential for injury. Unsafe operation

or maintenance of your generator

could lead to serious injury or death

to you or others.

Any gasoline operated household

generator will incur voltage variations

causing damage to voltage sensitive

appliances or could result in fire.

Operation of generator in careless

manner.

Operation of voltage sensitive appli-

ances without a voltage surge pro-

tector.

RISK OF UNSAFE OPERATION

HAZARD HOW TO PREVENT IT

WHAT COULD HAPPEN

Raising or suspending generators

equipped with lift rings improperly

Generator could fall causing serious in-

jury or death to you or others.

Improper raising or suspending can

cause damage to the generator.

Always use proper connecting

procedures as described in this

manual when connecting cables,

chains, or straps for raising or

suspending generators equipped

with lift rings.

Always use cables, chains, or

straps rated at 2000 lbs working

load or more to raise or suspend

generator.

Generator will not operate properly

and will cause damage to the genera-

tor and could cause serious injury or

death to you or others.

Operating generator while suspended Never operate generator while

suspended or in an unlevel posi-

tion. Always operate generate on

a flat, level surface.

8 — ENG

MGP-670070

RISK FROM LIFTING

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

The generator is too heavy to be

lifted by one person. Obtain

assistance from others before you

try to move it.

Serious injury can result from at-

tempting to lift too heavy an object.

Lifting a very heavy object.

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

RISK OF MOVING PARTS

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

Never operate generator with

guarding or cover plates removed.

Avoid wearing loose fitting clothing

or jewelry which could be caught

by moving parts.

The generator contains parts which

rotate at high speed during operation.

These parts are covered by guarding

to prevent injury.

Contact with moving parts can

result in serious injury.

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

During operation, touch only the

control surfaces of the generator.

Keep children away from the

generator at all times. They may

not be able to recognize the

hazards of this product.

Contact with hot surfaces, such as

engines exhaust components, could

result in serious burns.

Contact with hot engine and

generator components.

RISK OF HOT SURFACES

9 — ENG MGP-670070

ASSEMBLY

CARTON CONTENTS

1 - Generator

2 - Wheels

1 - Axle

4 - 5/16-18 x 1 3/4 "

Cap Screws

7 - 5/16-18

Lock Nuts

Parts and Parts Box for Wheel Kit Assembly

Parts Bag for Battery Installation

1 - 5/16-18 x 3.4 "

Cap Screws 1 - 5/16-18

Lock Nuts

1 - "L" Battery Bracket

2 - Battery Bolt Hold Down

1 - Black Negative Battery Cable (black)

1 - Red Positive Battery Cable (red) with battery boots

1 - Star Washer 2 - Wing Nuts

2 - Axle Spacers

2 - Bracket

1 - Cotter Pin 1 - Axle End Cap

3 - 5/16-18 x 3/4 "

Cap Screws

1 - Flat Washer

3/4 OD x 11/16 ID

2 - Handle Assemblies

1 - Louvered Heat

Deflector 4- Screws, HH #8-32

1 - Owner's Manual

*1 - Twistlock Plug L5-30P

*1 - Twistlock Plug L14-30P

* To be installed and/or used in

accordance with appropriate local electrical codes

and regulations. Refer to enclosed instructions for

proper installation.

1 - Parts Bag

NOTE: The axle is stored in one handle assembly for

shipping purposes

10 — ENG

MGP-670070

Read owner’s manual. Do not attempt to operate equipment until you have read Owner’s

Manual for Safety, Assembly, Operation, Maintenance, Storage Instructions.

REMOVE GENERATOR FROM CARTON

• Open carton from top.

• Cut carton along dotted lines.

• Remove generator through opening in carton.

• Remove parts box containing wheel kit parts.

• Cut wire tie securing handle assembly to top

frame.

• Cut wire ties securing handle assembly to side

frame. This handle assembly stores the axle

during shipping. Remove the base end cap and

slide the axle from handle assembly. Replace

base end cap with washer.

• Remove all packaging material from handle

assemblies and oil filter on engine.

• Place handle assemblies aside to be used when

assembling the wheel kit.

• Using a 1/2 inch socket remove shipping block

from under the generator head. Unscrew the bolt

and remove the wood block. NOTE: It is very

important that this is removed before starting your

generator.

IMPORTANT: Before any attempt to start your genera-

tor be sure to check engine oil (See Adding Engine Oil

paragraph in the Operation section on page 15 of this

manual.)

TOOLS NEEDED FOR ASSEMBLY

1 - Box Cutter or Knife

2 - 1/2" Wrenches

1 - Pair Wire Pliers

1 - Hammer

1 - 1/2" Socket and Socket Wrench

1 - 1/4" Socket and Socket Wrench

1 - 1" thick x 1' square piece of wood

Handle Assembly

secured to top frame

Parts Box

containing

Wheel Kit

parts

Axle is stored in

Handle Assembly

secured to side

frame

Make sure

packaging

material is

removed from oil

filter on engine

Base

End

Cap

Andere Handbücher für 919.670070

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Tragbarer Generator Handbücher

Craftsman

Craftsman 580.327141 Bedienungsanleitung

Craftsman

Craftsman CMXGIAC2200 Bedienungsanleitung

Craftsman

Craftsman 580.326301 Bedienungsanleitung

Craftsman

Craftsman CMXGGAS030791 Bedienungsanleitung

Craftsman

Craftsman 580.327360 Bedienungsanleitung

Craftsman

Craftsman 919.670031 Bedienungsanleitung

Craftsman

Craftsman 580.329130 Bedienungsanleitung

Craftsman

Craftsman 580.323610 Bedienungsanleitung

Craftsman

Craftsman 919.670041 Bedienungsanleitung

Craftsman

Craftsman 919.679500 Bedienungsanleitung

Craftsman

Craftsman CMXGGAS030730 Bedienungsanleitung

Craftsman

Craftsman 580.323611 Bedienungsanleitung

Craftsman

Craftsman 580.675512 Bedienungsanleitung

Craftsman

Craftsman 580.323602 Bedienungsanleitung

Craftsman

Craftsman 919.679470 Bedienungsanleitung

Craftsman

Craftsman 580.327203 Bedienungsanleitung

Craftsman

Craftsman CMXGGAS030733 Bedienungsanleitung

Craftsman

Craftsman 580.327160 Bedienungsanleitung

Craftsman

Craftsman 580.325600 Bedienungsanleitung

Craftsman

Craftsman 580.327130 Bedienungsanleitung

Craftsman

Craftsman 580.328310 Bedienungsanleitung

Craftsman

Craftsman 919.679580 Bedienungsanleitung

Craftsman

Craftsman 919.670040 Bedienungsanleitung

Craftsman

Craftsman 580.327140 Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

evertz

evertz 7700 Series Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung

Wallenstein

Wallenstein GF5000A Bedienungsanleitung

Leroy-Somer

Leroy-Somer LSA 49.1 Bedienungsanleitung

Yamakoyo

Yamakoyo SH2900DX Bedienungsanleitung