Creality 3D Pad Bedienungsanleitung

Speciﬁcations and Interface Description

Installation Guide

Use the 3D Pad Mini

Bed Leveling

Creative 3D Usage

3D PAD MINI

3D Pad Mini User Manual

Firmware Upgrade,Notes and Maintenance

TF Card Slot

USB 2.0

01 Speciﬁcations and Interface Description

4.3 Inches

Screen Resolution (480*272)

Beeper

IIC Sensor Interface

3D Device Interface

Filament Sensor Interface

3D Pad Mini Filament Sensor

02 Installation Guide

Before installation Installation completed

3D Pad Mini

3D Printer

Filament Sensor

FC-FD Flat Cable

XH2.54-3P Flat Cable

Filament

Firmware Upgrade：

Notes and Maintenance:

Firmware Upgrade

Notes and Maintenance

1.3D Pad Mini working voltage 4.65~6.50V/1A

3.Before installing the 3D Pad Mini, check whether the printer matches the 3D Pad Mini reserved interface, and

then connect it to the 3D Pad Mini

10.Keep the equipment surrounding free of other debris accumulation, keep it clean and tidy, etc

5.Always turn oﬀ the power or physical switch of the 3D printing device before installing the 3D Pad Mini

6.The 3D Pad Mini must be ﬁxed to the 3D printing device

2.Please unplug the original screen before using the 3D Pad Mini

Step 1: Format the SD card not larger than 32g into fat32 format

Step 3: Insert the SD card into the 3D Pad Mini, power on, and wait for the 3D Pad Mini to read the card until

the progress bar reaches 100% and displays "successful"

Step 4: Power oﬀ the 3D Pad Mini and remove the SD card (if the SD card is not removed, the 3D Pad Mini will

repeat programming after power on). At this time, connect the 3D Pad Mini to the printer and wait for

the printer to communicate with the mainboard

Step 2: Visit the Creality oﬃcial website (https://www.creaity.com/download) > Support >Download Center,

download the mainrboard ﬁrmware corresponding to the printer and upgrade the mainboard ﬁrmware

4.The ﬁlament sensor cable is connected to the corresponding interface of the 3D Pad Mini, and the ﬁlament

is inserted into the ﬁlament sensor hole

8.3D Pad Mini ﬁrmware version 4.2.2 only supports the mainrboard V4.2.2; 3D Pad Mini ﬁrmware version 4.2.7

only supports the mainboard V4.2.7

9.Ensure that the power cord and data cable of the equipment are not damaged, and the plug or port is not

corroded and aged

04 Use the 3D Pad Mini

1.Select "Prepare" (Preparation before printing)

Step 1:

2.Enter "Prepare→ Auto Home" and the nozzle return to the starting position

3.Select "Return" (Exit to the main interface)

①

②

③

Step 2:

⑤

④

4.Select "Print" (Go to the ﬁle selection)

5.Select the ﬁle to print

Step 3:

⑥

⑦

6.Click "Settings" (To enter the preheat interface)

7.It can adjust the nozzle temperature, bed temperature, print speed, Z axis movement, nozzle fan on/oﬀ

Step 4:

⑧

⑨

9.Start printing

8.Select "return" (The preheat temperature is up to the target temperature)

Bed Leveling

①

③

②

1.Select "level" (In the main interface)

2.Select"Z+" or "Z-" to adjust the Z axis up and down movement (Optional movement precision and auto leveling)

3.Select "Return" (Exit to the main interface)

Creative 3D Usage

Software download:

How to start the software：

Open the software: Double-click "Creative3D" to open the application

Software download link: https://www.creaity.com/download

Andere Handbücher für 3D Pad

Inhaltsverzeichnis

Andere Creality 3D-Drucker Handbücher

Creality

Creality CR-5 Bedienungsanleitung

Creality

Creality LD-002R Bedienungsanleitung

Creality

Creality HALOT-LITE Bedienungsanleitung

Creality

Creality CR-6 Max Bedienungsanleitung

Creality

Creality CR-6 Max Bedienungsanleitung

Creality

Creality Laser Module Bedienungsanleitung

Creality

Creality 3D Pad Bedienungsanleitung

Creality

Creality HALOT-MAGE Bedienungsanleitung

Creality

Creality Ender-5 Plus Bedienungsanleitung

Creality

Creality BMG CR-10 PrintHead Bedienungsanleitung

Creality

Creality K1 Bedienungsanleitung

Creality

Creality Spider Bedienungsanleitung

Creality

Creality Sermoon V1 Bedienungsanleitung

Creality

Creality CR-10 Series Bedienungsanleitung

Creality

Creality CR-10 SE Bedienungsanleitung

Creality

Creality CR-1000 Pro Bedienungsanleitung

Creality

Creality CR-100 Handbuch

Creality

Creality Sermoon V1 Bedienungsanleitung

Creality

Creality K1 Bedienungsanleitung

Creality

Creality ENDER-3 V2 Bedienungsanleitung

Creality

Creality CR-200B Pro Bedienungsanleitung

Creality

Creality CR-10 Smart Bedienungsanleitung

Creality

Creality HALOT-LITE CL-89L Bedienungsanleitung

Creality

Creality CR-10 Max Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch