Creality HALOT-ONE Bedienungsanleitung

3D Printer User Manual

V1.0

HALOT-ONE

Create Realities, Realize Dreams

HALOT-ONE

Thank you for choosing Creality. For your convenience, please read through this User Manual before you started and follow the instructions provided carefully.

Creality is always ready to provide you with high-quality services. If you encounter any issues or have any questions when using our products, please use the contact

information at the end of this manual. To further improve your user experience, you can ﬁnd more about our devices via the following methods:

User manual: You can ﬁnd instructions and videos in the USB drive provided with the printer.

You can also visit our oﬃcial website (https://www.creality.com) to ﬁnd information regarding software, hardware, contact information, device instructions, device

warranty information, and more.

Please visit our oﬃcial website https://www.creality.com. Click on Homepage → Support→ Download. Download the required ﬁrmware and install it to use it with

your printer.

Firmware Upgrade:

Dear Users：

Instructions for Use

Do not use this printer by methods or operations that are not described in this manual, otherwise it may result in accidental injury or property damage.

Do not place this printer near ﬂammable materials, explosive materials or high heat sources. Please place this printer in a ventilated, cool and low-dust environment.

Do not place this printer in a vibrating or any other unstable environment, as the printing quality will be compromised when the printer shakes.

Please use the ﬁlament recommended by the manufacturer, otherwise the printer may be damaged.

Please use the power cord provided with the printer and do not use the power cord of other products. The power plug must be plugged into a three-hole socket with a ground wire.

Do not open the printer cover while the printer is in operation, otherwise the printing process may be interrupted.

Do not wear cotton gloves while operating the printer, otherwise the moving parts may cause accidental injury including cuts and lacerations.

Please regularly clean the printer body with a dry cloth while the power is oﬀ, and wipe oﬀ dust, sticky printing materials, and foreign objects on the guide rails.

Children under the age of 10 must not use this printer without adult supervision in order to avoid accidental injury.

Warning: Do not plug or unplug the power cable while the printer is turned on.

Users should abide by the laws and regulations of the corresponding country and region where the equipment is located (place of use), abide by professional ethics, and pay

attention to safety obligations. The use of our products or equipment for any illegal purpose is strictly prohibited. Our company is not responsible for the relevant legal

responsibilities of any violators.

After the printing is complete, please wear gloves and wait for a while before removing the printing platform. Use tools to remove the model from the platform, and do not touch

the platform with your bare hands when cleaning it.

About the Printer

Device Speciﬁcations

List of Parts

Table of Contents

Installing the 3D Printer

Using the 3D Printer

Troubleshooting

First Printing

Circuit Wiring

Remote Controlled Printing

01-01

02-02

03-03

04-05

11-13

06-10

16-16

15-15

14-14

1. About the Printer

Torx Head Screw

Leveling Screw

Platform

Tray Fixing Screw

Tray

Air Filter Power Socket

Power Switch

Type-B USB Port

USB Port

Touch Screen

Limit Sensor

2.Equipment parameters

Model Name HALOT-ONE

USB Disk, Creality Cloud

1620*2560

0.05mm

1-4S/layer

100W

221*221*404mm

295*295*545mm

8.8KG

5 inch touch screen

Common rigid photosensivie resin, Standard resin, Hight hardness,High toughness, Dental model resin.

Integral light source (wavelength 405nm)

Win7/Win8/Win10 64bit, Mac system(32-bit is not supported)

127*80*160mm(length,width and height)

Slicing Software Operation System

Rated Power

Build Size

Touch Screen

Machine Size

Package size

Gross Weight

Machine Language

Print Method

Print speed

Compatible Resin

Rated Voltage

Light Source Type

XY Axis Resolution

XY Axis Accuracy

Basic Parameters

100-240V~, 50/60Hz

7.1KGNet Weight

中文(简/繁)/ English/ Español/ Deutsche/ Français/ Pусский/ Português/ Italiano/ Türk/Nederlands/Polskie/日本語/한국어

Layer Thickness 0.01-0.2mm

3. List of Parts

List of Tool Kit Items

USB Drive x 1

Printing Platform x 1 Tray x 1 Printer x 1

Paper Funnel x 4

Release Filmx 1

Paint Brush x 12#, 2.5#, 3# Screwdriver x 1

Metal Blade x 1

Note: The components above are for reference only. The actual product may vary.

Power Cord x 1

Remove the protective cotton above the printing screen

as shown in the picture：

4. Assemble the 3D Printer

1. Take out the machine 3.Remove the foam above the screen

2.Remove the resin vat

5. Installing the 3D Printer

Printer x 1

Upper Cover x 1

Note: Embed the upper cover in the mainframe to complete the installation.

6. Interface Information

Note: The current interface is for reference only, due to the continuous upgrading of functions, the actual to the oﬃcial

website of the latest ﬁrmware Ul as the standard.

Setting

Inhaltsverzeichnis

Andere Creality 3D-Drucker Handbücher

Creality

Creality BLTouch Bedienungsanleitung

Creality

Creality ENDER-3 V2 Bedienungsanleitung

Creality

Creality HALOT-ONE PRO Bedienungsanleitung

Creality

Creality CR-30 Bedienungsanleitung

Creality

Creality CR-10 Series Bedienungsanleitung

Creality

Creality HALOT-ONE PLUS Bedienungsanleitung

Creality

Creality Ender-5 Plus Bedienungsanleitung

Creality

Creality CR-10 S5 Bedienungsanleitung

Creality

Creality Sermoon V1 Bedienungsanleitung

Creality

Creality K1C Bedienungsanleitung

Creality

Creality HALOT-LITE CL-89L Bedienungsanleitung

Creality

Creality CR-10 Series Bedienungsanleitung

Creality

Creality CR-10 S5 Bedienungsanleitung

Creality

Creality CR-10 Max Bedienungsanleitung

Creality

Creality Ender-6 Bedienungsanleitung

Creality

Creality CR-6 Max Bedienungsanleitung

Creality

Creality CR-5 Pro Bedienungsanleitung

Creality

Creality CREALITY BOX Bedienungsanleitung

Creality

Creality CR-10 Series Bedienungsanleitung

Creality

Creality Sonic Pad Bedienungsanleitung

Creality

Creality Ender-3 Bedienungsanleitung

Creality

Creality CR-5 Bedienungsanleitung

Creality

Creality HALOT-MAGE Bedienungsanleitung

Creality

Creality CR-10 SE Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch