Creality CR-10 Series Bedienungsanleitung

CR-10 Series 3D Printer User Manual

lThe User Manual is for the CR-10 Series of 3D printers. It is also

applicable for the CR-10S/CR-10 S4/CR-10 S5.

lBut CR-10 mini without T-Bracket (Right) & Decoration Strip.

lDue to the different types of devices、hardware and software

upgrade, it is normal if the devices have little different. Please be

subject to the actual products.

lDetailed instructions for using are available on the TF card.

V5.1

Parameters

Basic Parameters

Model

CR-10

CR-10S

CR-10 S4

CR-10 S5

CR-10mini

Printing Size

300*300*400mm

400*400*400mm

500*500*500mm

300*220*300mm

Molding Tech.

FDM

Nozzle Number

Slice Thickness

0.1mm-0.4mm

Nozzle Diameter

Standard 0.4mm

Precision

±0.1mm

Filament

1.75mm PLA

File Format

STL/OBJ/AMF

Working Mode

Online or TF card offline

Slice Software

Creality Slicer/Cura/Repetier-Host/Simplify3D

Power Supply

Input:AC 115V/230V 50/60Hz

Output:DC 12V

Total Power

270W

250W

270W

Bed Temp.

≤100℃

≤60℃

≤100℃

Nozzle Temp.

≤250℃

Resume Print

Yes

Filament Detector

Yes

Dual Z-Axis

Yes

language Selection

EN/CN

Operating System

Windows XP/Vista//7/8/10 MAC/Linux

Printing Speed

≤180mm/s，Normal 30-60mm/s

CONTENTS

Dear Customers:

Thank you for choosing our products. For the best experience, please read the

instructions before operating the Printer. Our 3D team will always be ready to give

you the best service. Please contact us via the phone number or e-mail address

provided at the end when you encounter any problem with the Printer.

For a better experience in using our product, you may learn how to use the Printer in

the following ways:

Learning from the instructions and videos that come with your TF card.

Visit our official website at www.creality3d.cn You will find some related software or

hardware information, contact details, operation and maintenance instructions on the

website.

Introduction................................1

General List................................2

Device Installation......................3

Cable Connection......................4

Screen Information....................5

Loading Filament...…............…6

Platform Adjustment.................7

Software Installation.................8

For the First Printing................9

NOTES

1. Do not use the printer in other wrong ways to avoid personal injury or property

damage.

2. Do not place the printer near any heat source or flammable or explosive objects.

We suggest placing it in a well-ventilated, low-dust environment.

3. Do not expose the printer to violent vibration or any unstable environment, as

this may cause poor print quality.

4. Before using experimental or exotic filaments, we suggest using standard

filaments such as ABS or PLA to calibrate and test the machine.

5. Do not use any other power cable except the one supplied. Always use the

three-pin plug .

6. Do not touch the nozzle or printing surface during operation as they may be hot.

Keep hands away from machine while in use to avoid burns or personal injury.

7. Do not wear gloves or loose clothing when operating the printer. Such cloths

may become tangled in the printers moving parts leading to burns, personal

injury, or printer damage.

8. When cleaning debris from the printer hotend, always use the provided tools.

Do not touch the nozzle directly when heated. This can cause personal injury.

9. Clean the printer frequently. Always turn the power off when cleaning, and wipe

with a dry cloth to clean dust, adhered printing plastics or any other material

from the frame, guide rails, or wheels . Use glass cleaner or isopropyl alcohol to

clean the print surface before every print for consistent results.

10. Children under the age of 10, should not use the printer without any supervision.

01/

Introduction

Filament Holder

Control Box

Nozzle Assembly Connection

Platform Connection

Power Cable Connection

Extruder (E) Stepper

X Limit Switch

X Stepper

Z Limit Switch

Z Stepper

Y Limit Switch

Y Stepper

Nozzle Kit

TF Slot and USB Port

Display Screen

Control Knob

Voltage Selection

Platform

Base Frame

Z Gantry Frame

uTool list

02/

General List

Tool Box Control Box

No.

Image

Name

Qty

No.

Image

Name

Qty

No.

Image

Name

Qty

Spool & Nuts

1set

Power Cable

Scraper

Spool Holder

USB Cable

Cable Ties

1set

TF Card & Card

Reader

1set

PTFE Tubing

(spare part)

Hex keys, Wrench

& Screwdriver

1set

T-Bracket (Right)

Nozzle Cleaner

Spare Parts

1set

T-Bracket

& Z Limit Switch

(Left)

Filament（200g）

Decorative Strip

M5X25 Bolt & Lock

Washer

4 sets

Diagonal Pliers

Thumb Screw

Base Frame Gantry Frame

*CR-10 mini without T-Bracket (Right) & Decoration Strip.

03/

Device Installation

Note: Make sure that the nut for

pro file h as b een turne d by 90°

before fastening the

T-shaped fixing block.



M5X25

4pcs

*CR-10 mini without T-Bracket (right).

uInstall the Gantry Frame

uInstall the T-Shaped Fixing Block.

Installation decoration strip into

the notch, starting from one end.

Cut off the excess material with

the diagonal pliers

Attach the Decoration strip to all

parts needing to be decorated.

Attach the Bracket

with two thumb screws.

Attach Spool Holder

with included Nuts

Finished

◆ Install the Rack

◆ Installation decoration strip

*CR-10mini without Decoration Strip.

*The decoration strip is available in various colors. The pictures above are for reference only.

Y Stepper and Limit Switch

Extruder (E) Stepper

X Stepper and Limit Switch

Z Stepper and Limit Switch

Connect the aviation connectors to the

ports

04/

Cable Connection Connect the Stepper Motors according to

the yellow labels on the 6pin (4-wire) side.

Connect the Limit Switches according to the

yellow labels on the 3pin (2-wire) side.



•Select the correct input voltage to match your local

mains (230V or 115V)

•Damage can occur if voltage is set incorrectly.

•Make sure the power cable is connected.

Set Temperature of

the Nozzle

Current Temperature

of the Nozzle

Set Temperature of

the Hot Bed

Current Temperature

of the Hot Bed

Part Cooling Fan

Speed

Current Location of

the nozzle

Print Time

Print Progress

Prompt Message

Print Speed

Device Model

Push：OK/Enter Sub Menu

Turn：Change Option/Value

05/

Screen Information

Sub Menu

Explanation

Info Screen↑

Main↑

Return

Prepare→

Auto Home

Return to Zero

Move Axis→

Moving X Y Z axis or Extruder by

inputting

Bed Auto Leveling

Disable Steppers

Close motor and move X Y Z axis by

hands

Change Filament

Preheat PLA

Preheat ABS

Cooldown

Close and cooldown the nozzle

Control→

Temperature→

Heat the nozzle and bed or change fan

speed by inputting number

Restore Failsafe

Restore factory setting

Language

English/Chinese

No SD card/

Print from TF

Select the printing model

Init. SD Card

/Change SD

Card

Printing

Tune→

Speed

Change Printing Speed by inputting

Nozzle

Change the temperature by inputting

Bed

Change the temperature by inputting

Fan Speed

Change Fan Speed by inputting

Flow

Change filament flow by inputting

number

Pause Print

Can choose to continue printing

Stop Print

Reprint or choose another model to print

Andere Handbücher für CR-10 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Creality 3D-Drucker Handbücher

Creality

Creality CR-M4 Bedienungsanleitung

Creality

Creality CR-Scan Ferret 3D Pro Bedienungsanleitung

Creality

Creality HALOT-LITE CL-89L Bedienungsanleitung

Creality

Creality K1 Max Bedienungsanleitung

Creality

Creality Halot-Sky Bedienungsanleitung

Creality

Creality BMG CR-10 PrintHead Bedienungsanleitung

Creality

Creality TL4800 Bedienungsanleitung

Creality

Creality 3dpRINTmILL Bedienungsanleitung

Creality

Creality CR-10 Series Bedienungsanleitung

Creality

Creality CR-X Technisches Datenblatt

Creality

Creality CR-10 S5 Montageanleitung

Creality

Creality K1 Max Bedienungsanleitung

Creality

Creality Ender Bedienungsanleitung

Creality

Creality BLTouch Bedienungsanleitung

Creality

Creality CR-10S Pro Bedienungsanleitung

Creality

Creality CR-100 Handbuch

Creality

Creality CR-10 SE Bedienungsanleitung

Creality

Creality 3dpRINTmILL Bedienungsanleitung

Creality

Creality Ender-5 Plus Handbuch

Creality

Creality CR-Laser Falcon Bedienungsanleitung

Creality

Creality CR-6 Max Bedienungsanleitung

Creality

Creality CR-10 Smart Bedienungsanleitung

Creality

Creality K1 Bedienungsanleitung

Creality

Creality Halot-Sky Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch