Creality CR20Pro Handbuch

CR20 Pro 3D Printer Guide Book

This guide book is for standard CR20 Pro.

Please plug the power cord into a three-hole power jack.

Detailed instructions for use are available on the TF card.

NOTES

1. Do not use the printer any way other than described herein in order to avoid

personal injury or property damage.

2. Do not place the printer near any heat source or flammable or explosive

objects. We suggest placing it in a well-ventilated, low-dust environment.

3. Do not expose the printer to violent vibration or any unstable environment, as

this may cause poor print quality.

4. Before using experimental or exotic filaments, we suggest using standard

filaments such as ABS or PLA to calibrate and test the machine.

5. Do not use any other power cable except the one supplied. Always use a

grounded three-prong power outlet.

6. Do not touch the nozzle or printing surface during operation as they may be

hot. Keep hands away from machine while in use to avoid burns or personal

injury.

7. Do not wear gloves or loose clothing when operating the printer. Such cloths

may become tangled in the printers moving parts leading to burns, possible

bodily injury, or printer damage.

8. When cleaning debris from the printer hotend, always use the provided tools.

Do not touch the nozzle directly when heated. This can cause personal injury.

9. Clean the printer frequently. Always turn the power off when cleaning, and

wipe with a dry cloth to remove dust, adhered printing plastics or any other

material off the frame, guide rails, or wheels . Use glass cleaner or

isopropyl alcohol to clean the print surface before every print for consistent

results.

10. Children under 10 years of age should not use the printer without supervision.

CONTENTS

Dear consumers,

Thank you for choosing our products. For the best experience,

please read the instructions before operating the Printer. Our 3D

team will always be ready to give you the best service. Please

end when you encounter any problem with the Printer.

For a better experience in using our product, you may learn how to

use the Printer in the following ways:

View the accompanied instructions and videos on the TF card.

Visit our official website at www.creality3d.cn You will find

relevant software/hardware information, contact details and

operation and maintenance instructions on the website.

Introduction

21 4

6. Nozzle Kit

7. Automatic leveling（Bill Touch）

8. Filament Rack

9. Extruder (E) Steppers

10. Y Axis Limit Switch

11. Y Axis Steppers

12. Coupling

13. Z Axis Steppers

14. X Axis Limit Switch

15. X Axis Steppers

1. TF Card Slot

2. USB Port

3. Platform

4. LCD Display Screen

5. Control Knob

General List

Base Frame Gantry Frame

Tool Kit

uTool List

Sample Filament （200g） 2

No.

Image

Name

Qty

Scraper

Diagonal Pliers

TF Card & Card

Reader

Wrench & Screw

Driver

No.

Image

Name

Qty

Nozzle Cleaner

Rack Bracket

Rack Tube

Nuts

No.

Image

Name

Qty

Spare Parts

Power Cable

M5X25 Black Hex-Bolt

& Lock Washer

M4X8 Screw & M4

T-type Screw

Installtion

Install the

Rack

Install the Gantry Frame

M5X25

2pcs

M4X8 & T-nut

4pcs

M5X25 4pcs 2pcs

M4X8

M4 T-nut

Cable Connection

*Please plug the power cord

into a three-hole power jack.

Screen Information

Model

Cooling Fan Speed

Print Progress

Print Time

Remaining Message

Push:OK/Enter

Sub Menu

Rotate:Change

Option/Value

Set Temperature of

the Nozzle

Current Temperature

of the Nozzle

Set Temperature of

the Hot Bed

Current Temperature

of the Hot Bed

Print Rate

Current Location of

the Nozzle

Screen Options

Sub Menu

Explanation

Info Screen

main

Return

Prepare

Disable Steppers

Moving X Y Z axis by your hands

Auto Home

Return to the origin

Preheat PLA

Nozzle ：185℃ Bed：45℃

Preheat ABS

Nozzle ：240℃ Bed：70℃

Cool down

Close and cool down the nozzle

BLTouch Self-Test

Set home offsets

Move Axis

Moving X Y Z axis or Extruder by

given value

Control

Temperature

Heat the nozzle and the bed or

change fan speed by given value

Filament

BLTouch

Restore Failsafe

Restore factory setting

No SD card/Print from SD

Init.SD-Card/Change SD-Card

Select the printing model

printing

Tune

Speed

Adjust percentage of printing

speed

Nozzle

Adjusting extrusion head

temperature

Bed

Adjusting hot bed temperature

Fan speed

Adjust fan speed

Flow

Adjust consumable flow percentage

Change Filament

Replace filament

Pause Printing

Stop printing

Loading Filament

Preheat

Method 1

Feeding

Method 2 Press and hold the extruder lever then

insert the 1.75mm filament through the small

hole of the extruder. Continue feeding until

you see filament come out the nozzle.

Tip：How to Replace the Filament？

1、Cutting filament near the Extruder and

slowly feed new filament until they are fed

into the new filament.

2、Preheating the nozzle and withdraw the

filament quickly and feed the new filament.

Bed Leveling

1.Prepare→Auto home，and wait to stop.

3.Control→Motion→Z Offset→write down the value of B，then rotate the knob until it comes out

as: C=B-A.

2. Prepare→Move axis→Move Z→Move 0.1mm→Rotate the knob until the distance between them is

about 0.2mm（as a sheet of A4 paper），write down the value of A.

0.2mm

（ A4 paper）

Andere Handbücher für CR20Pro

Inhaltsverzeichnis

Andere Creality 3D-Drucker Handbücher

Creality

Creality CR-3040 Pro Bedienungsanleitung

Creality

Creality Halot-Sky Bedienungsanleitung

Creality

Creality CR-10 Series Bedienungsanleitung

Creality

Creality Ender-3 Montageanleitung

Creality

Creality CR-10 Series Bedienungsanleitung

Creality

Creality CR-10 Series Handbuch

Creality

Creality CR-10 S5 Montageanleitung

Creality

Creality Ender-3 V3 KE Bedienungsanleitung

Creality

Creality Ender-3 V3 KE Bedienungsanleitung

Creality

Creality Ender-5 Bedienungsanleitung

Creality

Creality Sermoon V1 Bedienungsanleitung

Creality

Creality CR-10 Smart Bedienungsanleitung

Creality

Creality HALOT-MAX Bedienungsanleitung

Creality

Creality CR-6 Max Bedienungsanleitung

Creality

Creality CR-M4 Bedienungsanleitung

Creality

Creality CR-5 Pro Bedienungsanleitung

Creality

Creality CR-10 V3 Bedienungsanleitung

Creality

Creality CR-10 SE Bedienungsanleitung

Creality

Creality HALOT-ONE PRO Bedienungsanleitung

Creality

Creality CR-10S Pro Bedienungsanleitung

Creality

Creality Halot-Sky Bedienungsanleitung

Creality

Creality Ender-3 S1 Bedienungsanleitung

Creality

Creality CR-6 SE Bedienungsanleitung

Creality

Creality CR-Scan Ferret 3D Pro Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch