Creality Ender-5 Handbuch
Ender-5 Printer
Guide Book
◆This guide book is for standard Ender-5.
◆Please plug the power cord into a three-hole power jack.
◆Detailed instructions for use are available on the TF card.
V.1.0
To be the Chief Evangelist
To make Top-quality 3D printer
Contents
1. Introduction....................................1
2. General List.....................................2
3. Assembly.......................................3
4. Cable Connection............................8
5. Screen Information........................10
6. Loading Filament...........................11
7. Bed Leveling.....................................12
8. Software Installation.......................13
9. After-Sales Services..........................14
Preface
Dear consumers,
Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer.
Our 3D team will always be ready to give you the best service. Please contact us via the phone number or e-mail address
provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you may learn how to use the Printer in the following ways:
1. View the accompanied instructions and videos on the TF card.
2. Visit our official website at www.creality3d.cn You will find relevant software/hardware information, contact details and
operation and maintenance instructions on the website.
Notes
1. Do not use the printer any way other than described herein in order to avoid personal injury or
property damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it
in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor
print quality.
4. Before using experimental or exotic filaments, we suggest using standard filaments such as ABS or PLA
to calibrate and test the machine.
5. Do not use any other power cable except the one supplied. Always use a grounded three-prong power
outlet.
6. Do not touch the nozzle or printing surface during operation as they may be hot. Keep hands away from
machine while in use to avoid burns or personal injury.
7. Do not wear gloves or loose clothing when operating the printer. Such cloths may become tangled in
the printers moving parts leading to burns, possible bodily injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools. Do not touch the nozzle
directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to
remove dust, adhered printing plastics or any other material off the frame, guide rails, or wheels . Use
glass cleaner or isopropyl alcohol to clean the print surface before every print for consistent results.
10. Children under 10 years of age should not use the printer without supervision.
1. Introduction
3
1
2
14
1
12
6
11
10 15
85 7
4
13
16
1. Hot Bed
2. Leveling screw
3. Power supply
4. Switch
5. SD Slot and USB Port
6. Display
7. Z Stepper
8. Foot pad
9. Spool Holder
10. Extrusion mechanism
11. X Stepper
12. Nozzle Assembly
13. Y Stepper
14. Z Limit Switch
15. Y Limit Switch
16. X Limit Switch
9
2.General List
2
Bottom frame
G:Bottom Frame
F:Hot Bed
D:Extruder kit
E:Filament Holder
H:Display Screen
C:2040 Profile 4Pcs
A:Top Frame
B：Z-axis Frame
No. Image Name Qty
1Wrench &
Screw
driver 1set
2
TF
Card &
Reader
1set
3Spatula 1
4 Pliers 1
50.4mm
Nozzle Cleaner 1
6 Power Cable 1
7 USB Cable 1
8 PTEE Tube 1
9 Filament(200)g 1
10 Spare Parts 1set
Tool List
M5X25 8pcs
Place the profile hole of the
side upon, install the profile, but
not mess with the direction.
3
4pcs
Bottom Frame
2040 Profile
3. Assembly Step ⑴
Note: Tighten the four
screws on the top, then tight
the side screws.
8pcs
M5X25
Top Frame
4
3. Assembly Step ⑵
4pcs
M5X25
Note: Align the
bottom profile ,then
tighten the screws.
Z-axis Frame
5
3. Assembly Step ⑶
6
3. Assembly Step ⑷
4pcs
M4X10
Hot Bed
M4X8
2pcs 2pcs
M4X8
2pcs
M4 T-nut M4 T-nut
2pcs M5X6
2pcs
7
3. Assembly Step ⑸
M5 T-nut
M4X8
M4X8
Andere Handbücher für Ender-5
2
Inhaltsverzeichnis
Andere Creality 3D-Drucker Handbücher
Creality
Creality HALOT-ONE PLUS Bedienungsanleitung
Creality
Creality Ender-3 Handbuch
Creality
Creality CR-Scan Ferret 3D Pro Bedienungsanleitung
Creality
Creality CR-10 Smart Bedienungsanleitung
Creality
Creality HALOT-MAX Bedienungsanleitung
Creality
Creality K1 Bedienungsanleitung
Creality
Creality CR-5 Pro Bedienungsanleitung
Creality
Creality Ender-3 V3 SE Bedienungsanleitung
Creality
Creality Ender-3 Bedienungsanleitung
Creality
Creality CR-10 Smart Bedienungsanleitung
Creality
Creality CREALITY BOX Bedienungsanleitung
Creality
Creality CR-10 Smart Bedienungsanleitung
Creality
Creality CR-10S Pro Bedienungsanleitung
Creality
Creality CR-10 Series Bedienungsanleitung
Creality
Creality CR-10 Smart Bedienungsanleitung
Creality
Creality CR-6 SE Bedienungsanleitung
Creality
Creality HALOT-MAGE Bedienungsanleitung
Creality
Creality K1C Bedienungsanleitung
Creality
Creality 3D Pad Bedienungsanleitung
Creality
Creality CR-10 Smart Bedienungsanleitung
