Creator C310+ Bedienungsanleitung

Creator C310+ BM Multi-system Scanner

INDEX

1．Safety Precautions and Warnings................... 2

2. Using the Scan Tool...............................

2.1 Tool Description ...............................

2.2 Specifications ................................. 5

2.3 Accessories Include ............................ 5

2. Product Troubleshooting ........................ 7

3. Software Function................................. 8

3.1 System Configuration ........................... 9

. Diagnostics...................................... 11

.1 Read Trouble Code ............................. 1

.2 Erasing Codes ................................. 16

.3 Read DataStream ............................... 17

. Vehicle Information ........................... 18

5．Software update.................................. 20

Creator C310+ BM Multi-system Scanner

1．Safety Precautions and Warnings

To prevent personal injury or damage to vehicles

and/or the scan tool. Read this instruction

manual first and observe the follo ing safety

precautions at a minimum henever orking on a

vehicle.

·Always perform automotive testing in a safe

environment.

·Wear safety eye protection that meets ANSI

standards.

· Keep clothing, hair, hands, tools, test

equipment, etc. Away from all moving or hot

engine parts.

· perate the vehicle in a well ventilated work

area: Exhaust gases are poisonous.

·Put blocks in front of the drive wheels and

never leave the vehicle unattended while

running tests.

·Use extreme caution when working around the

ignition coil, distributor cap, ignition

wires and spark plugs. Theses components

create hazardous voltages when the engine is

running.

·NEUTRAL (for manual transmission) and make

sure the sparking brake is engaged.

· Keep a fire extinguisher suitable for

Creator C310+ BM Multi-system Scanner

gasoline/chemical/electrical fires nearby.

· Don’t connect or disconnect any test

equipment while the ignition is on or the

engine is running.

· Keep the scan tool dry, clean, free from

oil/water or grease. Use a mild detergent on

a clean cloth to clean the outside of the scan

tool, when necessary.

Creator C310+ BM Multi-system Scanner

2. Using the Scan Tool

2.1 Tool Description

① DLC -- Data Link Connector (DLC), Use to

connect the scan tool to the vehicle;

② LCD DISPLAY --

Indicates test results. Color,

Creator C310+ BM Multi-system Scanner

320 x 240 pixel display with contrast adjustment

③ KEY BROAD – include [ ][ ][ ][ ][ ]

[ ] [HELP]

④ USB PORT -- Use to connect the scan tool to

PC;

2.2 Specifications

A) Display:

Color, 320 x 240 pixel display with

contrast adjustment

B) Operation Temperature: -20 ℃ -- 75 ℃

C) Storage Temperature: -40 ℃ -- 120 ℃

D) Po er: 8V -- 24V

E) Dimensions:

Length Width Height

135mm 85mm 26mm

F) Weight

Net Weight: 250 g

Gross Weight: 450 g

2.3 Accessories Include

A) User’s Manual – Instructions on tool

operations.

B) USB Cable – Used to upgrade the scan tool.

Creator C310+ BM Multi-system Scanner

C) CD – save the update tool and user’s manual.

D) Optional accessories

OBD-16 to BMW-20 Socket – use test the car

of BMW made before 2000

Creator C310+ BM Multi-system Scanner

2.4 Product Troubleshooting

Vehicle Linking Error

A communication error occurs if the scan tool

fails to communicate with the vehicle’s ECU

(Engine Control Unit). You need to do the

following to check up:

A) Verify that the ignition is N;

B) Check if the scan tool’s BD II connector

is securely connected to the vehicle’s DLC;

C) Verify that the vehicle is BD2 compliant;

D) Turn the ignition off and wait for about 10

seconds. Turn the

E) Ignition back to on and continue the testing.

F) Verify the control module is not defective

Scan tool doesn’t po er up

If the scan tool won’t power up or operates

incorrectly in any other way, you need to do the

following to check up:

A) Check if the scan tool’s BD II connector

is securely connected to the vehicle’s DLC;

B) Check if the DLC pins are bent or broken.

Clean the DLC pins if necessary.

C) Check vehicle battery to make sure it is still

good with at least 8.0 volts.

Creator C310+ BM Multi-system Scanner

3. Soft are Function

CATION: Don’t connect or disconnect any test

equipment ith ignition on or engine running.

1) Turn the ignition off.

2) Locate the vehicle’s 16-pin Data Link

Connector (DLC)

3) Plug into the scan tool cable connector to the

vehicle's DLC ，the scan tool will be light.

As shown

4) Turn the ignition on. Engine can be off or

running

5) Press any key to enter Main Menu.

Creator C310+ BM Multi-system Scanner

USE the key [ ][ ] to select in the [Main Menu]

, and

press [ ] to selection

3.1 System Configuration

Select [SYSTEM CONFIGUARATION] in the Main

Menu and press

[ ]

. The screen will display the interface as shown

below:

The scanner allows you to make the following adjustments

settings

Creator C310+ BM Multi-system Scanner

1) [SYSTEM INFORMATION]: show the system information

Choose [SYSTEM INFORMATION] and press [ ].

The screen will display the interface as shown below:

Press [ ] or [ ] to return the [Main menu]

2) [BEEPER]: ON / OFF the beep.

Choose [BEEPER] and press [ ]

, the screen will display

the interface as shown below:

Press [ ][ ] to select, and press [ ] to confirm.

Andere Handbücher für C310+

Inhaltsverzeichnis

Andere Creator Autozubehör Handbücher

Creator

Creator C50X Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung