Crestron TMK-3000L Bedienungsanleitung

Crestron TMK-3000L & WMKT-3000L

Trim Ring Mount Kits

Installation Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

All brand names, product names and trademarks are the property of their respective owners.

Crestron TMK-3000L & WMKT-3000L Trim Ring Mount Kits

Trim Ring Mount Kits:

TMK-3000L & WMKT-3000L

Description

Trim Ring Mount Kits are the preferred method of mounting the Crestron Isys™

TPS-3000L series of lectern/wall-mounted video touchpanels when a finished

appearance within a neatly trimmed cutout is required. This application is perfect for

wallpapering.

There are two Trim Ring Mount Kits. The TMK-3000L is a pre-construction

accessory. Pre-construction refers to framed walls prior to hanging drywall. This

accessory is designed be used with the optional Pre-Construction Mount Kit (PMK-

3000L) or Back Box Kit (BB-3000L).

The WMKT-3000L is a post-construction kit. Post-construction refers to framed

walls with drywall hung. This accessory is designed with a mounting plate so that it

can be placed anywhere on a wall without the support from a stud.

NOTE: If necessary, consult the latest revision of the TPS-3000L Operations Guide

(Doc. 6077) for a complete list of mounting options.

Supplied Hardware

The TMK-3000L consists of a metal trim ring that attaches to the PMK-3000L or

BB-3000L. The WMKT-3000L consists of the trim ring found in the TMK-3000L as

well as a mounting plate. The mounting plate is the part that provides the necessary

support for post-construction applications.

Supplied Hardware of the TMK-3000L and WMKT-3000L

DESCRIPTION PART NUMBER QUANTITY

Metal Plate, Mounting

(WMKT-3000L only)

MTPL02848-1 1

Metal Trim Ring MTPL02847-1 1

Installation Guide – DOC. 6020 Trim Ring Mount Kits: TMK-3000L & WMKT-3000L •1

Trim Ring Mount Kits Crestron TMK-3000L & WMKT-3000L

The dimensions of the TMK-3000L/WMKT-3000L are shown below.

Dimensional Drawing

10.06 in

(25.55 cm)

7.84 in

(19.91 cm)

0.06 in

(0.15 cm)

6.98 in

(17.72 cm)

8.96 in

(22.77 cm) 2.22 in

(5.64 cm)

0.02 in

(0.05 cm)

MOUNTING PLATE (WMKT-3000L ONLY)

TRIM RING

0.70 in

(1.78 cm)

0.61 in

(1.54 cm)

Drywall Cutout Dimensions

2 •Trim Ring Mount Kits: TMK-3000L & WMKT-3000L Installation Guide – DOC. 6020

Crestron TMK-3000L & WMKT-3000L Trim Ring Mount Kits

Installation

This section provides an installation procedure for each Trim Ring Mount Kit. The

procedure for the TMK-3000L starts below and the “WMKT-3000L Procedure”

starts on page 4.

TMK-3000L Procedure

The procedure in this section provides the necessary steps for the assembly of the

TMK-3000L to either the PMK-3000L or BB-3000L. It is assumed that the

PMK-3000L or BB-3000L has been secured to the stud according to the procedures

in the latest revisions of their respective Installation Guides (Doc. 6024 and Doc.

6022, respectively). Also, it is assumed that drywall is in place and a rectangular

cutout for the touchpanel is made in the drywall (refer to the Drywall Cutout

dimensions on the previous page for cutout dimensions).

Complete the steps in the order provided. The only tool required and not supplied is

a level.

NOTE: When installing into the PMK-3000L, verify that the 18 AWG bus wire

securing the cables for the touchpanel remains attached.

1. Verify that the rectangular cutout in the drywall is as level as possible.

2. Insert the symmetrical trim plate into the opening, as shown in the

illustration after this step.

Insert Trim Plate into Opening

TRIM PLATE

IMPORTANT:

PLEASE MAKE DRYWALL CUTOUT AS

LEVEL AND CLEAN AS POSSIBLE.

THE MOUNTING PLATE ALLOWS FOR

ONLY MINOR ADJUSTMENT OF TPS-3000L.

3. When the trim plate is in position, bend the top two flanges of the plate

upward and the bottom two flanges downward.

• If mounting into the PMK-3000L, bend the flanges

approximately 90 degrees.

• If mounting into the BB-3000L, bend the flanges back as far

as they can go.

NOTE: If using BNC connectors (supplied by others), the flanges may need to be

bent out of the way

Installation Guide – DOC. 6020 Trim Ring Mount Kits: TMK-3000L & WMKT-3000L •3

Trim Ring Mount Kits Crestron TMK-3000L & WMKT-3000L

4. Run the necessary cables for the touchpanel and secure them behind the

drywall.

5. The TPS-3000L can be installed using the four tapped holes in the

PMK-3000L or BB-3000L. Refer to the latest revision of the

TPS-3000L Operations Guide (Doc. 6077) for details.

WMKT-3000L Procedure

The procedure in this section provides the necessary steps for installation of the

WMKT-3000L into a wall. Complete the steps in the order provided. The only tools

or materials required and not supplied are a drywall saw or equivalent and a level.

1. Locate an area on the wall that is free of miscellaneous wiring and

studs.

2. Make a small hole near the middle of the designated site; verify that the

location is suitable.

NOTE: Make the cutout as level and smooth as possible. The mounting plate allows

for only minor leveling adjustments. If a larger cutout is accidentally made, consider

purchasing the Crestron Mud Mount Kit, MMK-3000L. It and the mounting plate

supplied with the WMKT-3000L provide a cost-effective means of correction.

Essentially, The combination of these two kits makes up the Crestron Mud Mount

Kit for the Wall, WMKM-3000L. Simply follow the “WMKM-3000L Procedure” in

the latest revision of the Mud Mount Kits Installation Guide (Doc. 6021).

3. Use the drywall saw or equivalent to produce a level, rectangular cutout

in the drywall (refer to the Drywall Cutout dimensions on page 2 for

cutout dimensions.).

4. Insert the symmetrical trim plate into the opening, as shown in the

illustration after this step.

Insert the Trim Plate into the Opening

IMPORTANT:

PLEASE MAKE DRYWALL CUTOUT AS

LEVEL AND CLEAN AS POSSIBLE.

THE MOUNTING PLATE ALLOWS FOR

ONLY MINOR ADJUSTMENT OF TPS-3000L.

TRIM PLATE

DRYWALL

MOUNTING PLATE

5. Carefully pass the mounting plate through the opening and rest it

against the interior surface of the drywall.

4 •Trim Ring Mount Kits: TMK-3000L & WMKT-3000L Installation Guide – DOC. 6020

Crestron TMK-3000L & WMKT-3000L Trim Ring Mount Kits

6. When the mounting plate is in position, bend the top two flanges of the

trim plate upward (approximately 90 degrees) and the bottom two

flanges downward (approximately 90 degrees). Refer to the illustration

after this step.

NOTE: The mounting plate will have slight play; this is normal. It allows for minor

adjustments to the TPS-3000L during installation.

Bend Flanges

7. Run the necessary cables for the touchpanel and secure them behind the

drywall.

8. The TPS-3000L can be installed using the four tapped holes in the

mounting plate. Refer to the latest revision of the TPS-3000L

Operations Guide (Doc. 6077) for details.

Installation Guide – DOC. 6020 Trim Ring Mount Kits: TMK-3000L & WMKT-3000L •5

Trim Ring Mount Kits Crestron TMK-3000L & WMKT-3000L

Further Inquiries

If after reviewing this Installation Guide, you cannot locate specific information or

have questions, please take advantage of Crestron's award winning customer service

team by calling:

• In the US and Canada, call Crestron’s corporate headquarters at

1-888-CRESTRON [1-888-273-7876].

• In Europe, call Crestron International at +32-15-50-99-50.

• In Asia, call Crestron Asia at +852-2341-2016.

• In Latin America, call Crestron Latin America at +5255-5093-2160.

• In Australia and New Zealand, call Crestron Pacific at

+613-9480-2999.

As of the date of manufacture, the TMK-3000L and WMKT-3000L have been tested

and found to comply with specifications for CE marking.

Future Updates

As Crestron improves functions, adds new features, and extends the capabilities of

the TMK-3000L or WMKT-3000L, additional information may be made available as

manual updates. These updates are solely electronic and serve as intermediary

supplements prior to the release of a complete technical documentation revision.

Check the Crestron website (www.crestron.com) periodically for manual update

availability and its subjective value. Updates are available from the Download |

Product Manuals section and are identified as an “Addendum” in the Download

column.

6 •Trim Ring Mount Kits: TMK-3000L & WMKT-3000L Installation Guide – DOC. 6020

Crestron TMK-3000L & WMKT-3000L Trim Ring Mount Kits

This page intentionally left blank.

Installation Guide – DOC. 6020 Trim Ring Mount Kits: TMK-3000L & WMKT-3000L •7

Trim Ring Mount Kits Crestron TMK-3000L & WMKT-3000L

8 •Trim Ring Mount Kits: TMK-3000L & WMKT-3000L Installation Guide – DOC. 6020

This page intentionally left blank.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Crestron Rack & Stand Handbücher

Crestron

Crestron CAEN-CK Bedienungsanleitung

Crestron

Crestron TS-5-MSMK Bedienungsanleitung

Crestron

Crestron TST-902-DSW Maßzeichnung

Crestron

Crestron FTI-PWR-D Anleitung zur Verwendung

Crestron

Crestron PMK-12L Bedienungsanleitung

Crestron

Crestron C2N-CAMIDSPT Bedienungsanleitung

Crestron

Crestron RMK-12L Bedienungsanleitung

Crestron

Crestron CNWM-29A Bedienungsanleitung

Crestron

Crestron RMK-9L Bedienungsanleitung

Crestron

Crestron MMK-1000L Bedienungsanleitung

Crestron

Crestron PMK-3100L Bedienungsanleitung

Crestron

Crestron TMK-1000L Bedienungsanleitung

Crestron

Crestron MMK-3100L Bedienungsanleitung

Crestron

Crestron TSD-2020-WMK-BB Bedienungsanleitung

Crestron

Crestron PMK-6X-DSW Bedienungsanleitung

Crestron

Crestron CT-1000 Bedienungsanleitung

Crestron

Crestron C2N-RMAK Bedienungsanleitung

Crestron

Crestron C2N-IIF-SPMK Bedienungsanleitung

Crestron

Crestron TMK-12L Bedienungsanleitung

Crestron

Crestron TMK-3100L Bedienungsanleitung

Crestron

Crestron WMK-3200 Bedienungsanleitung

Crestron

Crestron PMK-4L Bedienungsanleitung

Crestron

Crestron TSW-730-MSMK Bedienungsanleitung

Crestron

Crestron ST-RMK Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung