Crestron HD-RX-4K-x10-C-E Bedienungsanleitung
HD-RX-4K-x10-C-E(-SW4)
4K Multiformat AV Switch and Receiver
Web Interface Configuration Guide
Crestron Electronics, Inc.
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Regulatory Model: M1845002
Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_
agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.
Crestron, the Crestron logo, Crestron Toolbox, and DM Lite are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. macOS and Safari are either trademarks or registered
trademarks of Apple, Inc. in the United States and/or other countries. Cisco is either a trademark or registered
trademark of Cisco Technology, Inc. in the United States and/or other countries. Chrome is either a trademark or
registered trademark of Google Inc. in the United States and/or other countries. HDMI and the HDMI logo are either
trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Internet
Explorer, Microsoft Edge, and Windows are either trademarks or registered trademarks of Microsoft Corporation in the
United States and/or other countries. Firefox is ether a trademark or a registered trademark of the Mozilla Foundation
in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in
this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or
photography.
©2022 Crestron Electronics, Inc.
Contents
Introduction 1
Web Interface 1
Access the Web Interface 1
Access Web Interface with a Web Browser 2
Access Web Interface with Crestron Toolbox Application 3
Actions Menu 4
Rebooting the Device 4
Restoring Factory Default Settings 5
EDID Management 5
Loading a Custom EDID File 6
Deleting a Custom EDID File 7
Upgrading Firmware 8
Downloading Device Logs 8
Status 9
General 9
Input/Output Status 11
Network 12
Control System 13
Routing 14
Inputs 15
Global EDID 15
Apply/Send Global EDID 15
Global Inputs 16
HDMI Inputs 18
General Settings 18
EDID 18
Input Signals 19
DM Lite Inputs 21
General Settings 21
Transmitter Inputs Settings 21
EDID 22
Applying EDID to the DM Lite Input 23
Applying EDID to a Transmitter Input 23
Input Signals 24
Audio 26
Web Interface Configuration Guide — Doc. 9211A Contents • i
Output 27
Output Settings 27
Connected Display 29
Output Signal 29
HDMI/Aux 1/Amp Output Audio Settings 30
Aux 2 Output Audio Settings 31
Automatic Power Settings 32
Configuring Power-Off Settings 32
Configuring Power-On Settings 34
Network 38
Device 39
Device Management 40
Firmware 40
Front Panel 41
RS232 Settings 41
Cloud Settings 43
Control System 43
Authentication Management 44
Third-Party Control 44
Generating a Configuration File 45
Enabling Third-Party Control 48
Disabling Third-Party Control 50
ii • Contents Web Interface Configuration Guide — Doc. 9211A
Web Interface Configuration Guide — Doc. 9211A HD-RX-4K-x10-C-E(-SW4) • 1
Introduction
The HD-RX-4K-x10-C-E(-SW4) is a multiformat AV switch and receiver which provides enhanced
remote HDMI video source switching and audio presentation capabilities in areas such as
classrooms and conference rooms. The HD-RX-4K-x10-C-E(-SW4) has two HDMI® inputs and
one scaling HDMI output.
In addition, the HD-RX-4K-410-C-E(-SW4) provides two DM Lite® inputs and the HD-RX-4K-510-
C-E(-SW4) provides three DM Lite inputs for connection to DM Lite transmitters.
The HD-RX-4K-x10-C-E-SW4 models include a 4-port Gigabit Ethernet switch. Two of the ports
(Ports 3 and 4) are PoE+ power sourcing equipment ports that can be connected to two PoE+
powered devices simultaneously.
Web Interface
The web interface of the HD-RX-4K-x10-C-E(-SW4) enables you to view device status
information and configure routing, input, output, network, and device settings.
Access the Web Interface
The web interface is accessed from a web browser. The following table lists various operating
systems and the corresponding supported web browsers.
OPERATING SYSTEM SUPPORTED WEB BROWSERS
Windows® operating system Chrome™ web browser, version 31 and later
Firefox® web browser, version 31 and later
Internet Explorer® web browser, version 11 and later
Microsoft Edge® web browser
macOS® operating system Safari® web browser, version 6 and later
Chrome™ web browser, version 31 and later
Firefox® web browser, version 31 and later
Operating System and Supported Web Browsers
To access the web interface, do either of the following:
lOpen the web interface directly in a web browser.
lOpen a web browser from within the Crestron Toolbox™ application.
2 • HD-RX-4K-x10-C-E(-SW4) Web Interface Configuration Guide — Doc. 9211A
Access Web Interface with a Web
Browser
1. Enter the IP address of the HD-RX-4K-x10-C-E(-SW4) into a web browser.
NOTE: To obtain the IP address, press the Setup button on the HD-RX-4K-x10-C-E(-
SW4) to display the IP address on the HDMI output. The IPaddress is displayed for 20
seconds.
2. Enter your credentials in the Device Administration dialog. The user name and password
are case sensitive. The default user name is
admin
, and the default password is
admin
.
NOTE: For enhanced security, it is recommended that the default password be changed.
3. Click Sign In.
Web Interface Configuration Guide — Doc. 9211A HD-RX-4K-x10-C-E(-SW4) • 3
Access Web Interface with Crestron
Toolbox Application
To access the web interface by opening a web browser within the Crestron Toolbox application,
do the following:
1. Open the Crestron Toolbox application.
2. From the Tools menu, select Device Discovery Tool. You can also access the Device
Discovery Tool by clicking the Device Discovery Tool button in the Crestron Toolbox
toolbar. The HD-RX-4K-x10-C-E(-SW4) is discovered and is listed in the device list on the
left side of the screen. The associated host name, IP address, and firmware version are
also displayed.
NOTE: If there is security software running on the computer, a security alert might be
displayed when the Crestron Toolbox application attempts to connect to the network.
Make sure to allow the connection so that the Device Discovery Tool can be used.
3. In the Device Discovery Tool list, double-click the HD-RX-4K-x10-C-E(-SW4) device.
4. Enter your credentials in the Authentication dialog that opens, and then click Log In.
5. Click Web Configuration in the Configuration page displayed on the left side of the Device
Discovery Tool.
4 • HD-RX-4K-x10-C-E(-SW4) Web Interface Configuration Guide — Doc. 9211A
Actions Menu
The Actions drop-down menu is displayed at the top right of each page and provides quick
access to common device functionality of the HD-RX-4K-x10-C-E(-SW4), such as:
lRebooting the device
lRestoring factory default settings
lEDID management
lPerforming firmware upgrades
lDownloading logs
The Actions drop-down menu can be accessed at any time by clicking the drop-down arrow of
the Actions drop-down menu.
Rebooting the Device
Certain changes to the settings may require that the HD-RX-4K-x10-C-E(-SW4) be rebooted to
take effect. To reboot the device, do the following:
1. Click Reboot in the Actions drop-down menu. The Confirmation message box appears.
2. Click Yes to reboot the device. The Reboot message box appears.
Wait for the device reboot to complete before attempting to reconnect to the device.
Web Interface Configuration Guide — Doc. 9211A HD-RX-4K-x10-C-E(-SW4) • 5
Restoring Factory Default Settings
1. Click Restore in the Actions drop-down menu to restore the settings of the HD-RX-4K-x10-
C-E(-SW4) to factory defaults.
NOTE: When settings are restored, all settings, including the network settings, will revert
to the factory default. If a static IP address is set, restoring the device to factory default
settings will revert the IP address to the default DHCP mode.
2. Click Yes in the Confirmation dialog to restore the HD-RX-4K-x10-C-E(-SW4) to factory
default settings. Click No to cancel the restore operation.
A dialog is displayed again, indicating that the Restore process was successful and that
the device rebooted.
EDID Management
The EDID Management dialog displays available built-in EDID files and enables loading of a
custom EDID file.
Built-in EDIDs are displayed in the Default List tab of the EDID Management dialog. The
following EDIDs are available:
l01 DM Default
lLaptop 16x9 1080P60 2CH
6 • HD-RX-4K-x10-C-E(-SW4) Web Interface Configuration Guide — Doc. 9211A
lLaptop 16x10 1920x1200 2CH
lLaptop 16x10 1280x800 2CH
lLaptop widescreen 2CH
lLaptop 16x9 1080P50 2CH
lDM default 4k 30Hz 2CH
lDM Default VGA
lDM Default 4k 60Hz 2CH
Loading a Custom EDID File
1. In the EDID Management dialog, click the User List tab and then click the button in
any available row of the table.
2. Click + Browse in the Load CEDID File dialog:
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Crestron Empfänger Handbücher
Crestron
Crestron AirMedia Series 3 Bedienungsanleitung
Crestron
Crestron QuickMedia QM-RX Bedienungsanleitung
Crestron
Crestron DM-RMC-4K-SCALER-C Betriebsanleitung
Crestron
Crestron MP-FS-RX1 Anleitung zur Verwendung
Crestron
Crestron DM-RMC-200-C Maßzeichnung
Crestron
Crestron CEN-C-TX-F Bedienungsanleitung
Crestron
Crestron HD-RXC-4KZ-101 Bedienungsanleitung
Crestron
Crestron HD-RX-4KZ-101-1G Bedienungsanleitung
Crestron
Crestron DigitalMedia 8G+ DM-RMC-4KZ-100-C Betriebsanleitung
Crestron
Crestron DM-RMC-SCALER-C Anleitung zur Verwendung
Crestron
Crestron DM-RMC-200-C Anleitung zur Verwendung
Crestron
Crestron DM-RMC-100-C Anleitung zur Verwendung
Crestron
Crestron DigitalMedia 8G+ DM-RMC-4K-100-C-1G Maßzeichnung
Crestron
Crestron HD-MD-400-C-E Betriebsanleitung
Crestron
Crestron AirMedia Series 3 Bedienungsanleitung
Crestron
Crestron DM-RMC-4KZ-100-C Maßzeichnung
Crestron
Crestron CNRFGWA Bedienungsanleitung
Crestron
Crestron DM-RMC-200-S Anleitung zur Verwendung
Crestron
Crestron DM-RMC-4KZ-SCALER-C Bedienungsanleitung
Crestron
Crestron AM-3200 Bedienungsanleitung
