Crestron TSW-730 Bedienungsanleitung

Crestron TSW-730

7” Room Scheduling Touch Screen

Configuration Guide

The specific patents that cover Crestron products are listed at patents.crestron.com.

Crestron, the Crestron logo, and Rava are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other

countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and

names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in

typography or photography.

This document was written by the Technical Publications department at Crestron.

Crestron TSW-730 7” Room Scheduling Touch Screen

Configuration Guide – DOC. 7414B Contents •i

Contents

7” Room Scheduling Touch Screen: TSW-730 1

Access the Setup Screens........................................................................................................... 1

Configure the Touch Screen ......................................................................................................3

Ethernet Setup ............................................................................................................. 3

IP Table Setup .............................................................................................................4

Audio Setup .................................................................................................................6

Display Setup .............................................................................................................. 7

Standby Timeout ......................................................................................................... 7

Diagnostics ..................................................................................................................8

About ......................................................................................................................... 11

Save & Exit ............................................................................................................... 11

Crestron TSW-730 7” Room Scheduling Touch Screen

Configuration Guide – DOC. 7414B 7” Room Scheduling Touch Screen: TSW-730•1

7” Room Scheduling

Touch Screen: TSW-730

Access the Setup Screens

The main setup menu is the starting point for configuring the TSW-730 touch screen

from Crestron®.

NOTE: If no project has been loaded or if an invalid project has been loaded, the

touch screen defaults to the main setup menu.

The setup screens enable basic configuration procedures prior to regular operation of

the touch screen.

During regular operation of the touch screen, there are two ways to activate the setup

functions:

1. Place a button on the project main page and assign the reserved join number

(17242) that activates setup.

2. Press hard keys 1, 2, 3, and 4, on the left side of the touch screen display, in

sequence twice (press 1, 2, 3, 4, 1, 2, 3, 4) within a 5 second period.

Button Numbering

7” Room Scheduling Touch Screen Crestron TSW-730

2•7” Room Scheduling Touch Screen: TSW-730 Configuration Guide – DOC. 7414B

The main setup menu is displayed.

Main Setup Menu

The main setup menu is comprised of buttons for Ethernet Setup, IP Table Setup,

Audio Setup, Display Setup,Standby Timeout and Diagnostics. In addition, there

is an About button that provides information about the touch screen and a Save &

Exit button. The functions of each are detailed in the next section of this guide.

Crestron TSW-730 7” Room Scheduling Touch Screen

Configuration Guide – DOC. 7414B 7” Room Scheduling Touch Screen: TSW-730•3

Configure the Touch Screen

Ethernet Setup

On the “Setup” menu, touch Ethernet Setup to display the “Ethernet Setup” menu.

“Ethernet Setup” Menu

The “Ethernet Setup” menu displays the touch screen’s Mac Address and IP Address,

Subnet Mask, Def Router, Primary DNS, Secondary DNS, Hostname and Domain.

There are controls for turning DHCP On or Off as well as a Set Static IP Address

Settings button, which provides access to controls which allow editing of these

settings. This screen also contains a Link indicator to show the status of the Ethernet

connection.

Touch Set Static IP Address Settings to display the “Ethernet Setup – Static IPs”

screen.

“Ethernet Setup – Static IPs” Screen

To edit the Static IP Address, Static Subnet Mask, Static Default Router, Preferred

DNS or Alternate Preferred DNS, touch the button directly under the label for the

entry to edit. The on-screen numeric keypad opens.

7” Room Scheduling Touch Screen Crestron TSW-730

4•7” Room Scheduling Touch Screen: TSW-730 Configuration Guide – DOC. 7414B

On-Screen Numeric Keypad

Use the keypad to make the new entry. Touch the “x” in the text field to clear any

previous entry. Touch to delete the last digit. Touch Save to save a new entry

or to return to the “Ethernet Setup – Static IPs” screen.

After new settings have been saved, touch Reboot Required to Apply IP Changes

on the “Ethernet Setup – Static IPs” screen to reboot the touch screen, so the new

settings can take effect.

If not making any changes, touch to return to the “Ethernet Setup” menu.

Touch again to return to the main setup menu.

IP Table Setup

On the main setup menu, touch IP Table Setup to display the “Ethernet Setup – IP

Table” menu.

“Ethernet Setup –IP Table” Menu

The “Ethernet Setup – IP Table” menu displays up to four IP table settings, each of

which has an Online indicator. To add or edit an entry, touch the Add/Edit button to

its left. The “Ethernet Setup – Edit IP Table Entry” screen is displayed.

Crestron TSW-730 7” Room Scheduling Touch Screen

Configuration Guide – DOC. 7414B 7” Room Scheduling Touch Screen: TSW-730•5

“Ethernet Setup –Edit IP Table Entry” Screen

Touch the field below CIP ID to display the on-screen hex keypad.

On-Screen Hex Keypad

Use the keypad to make the new entry. Touch the “x” in the text field to clear any

previous entry. Touch to delete the last digit. Touch Save to save a new entry

or to return to the “Ethernet Setup – Edit IP Table Entry” screen.

Touch the field below IP Address/Hostname to display the on-screen keyboard.

7” Room Scheduling Touch Screen Crestron TSW-730

6•7” Room Scheduling Touch Screen: TSW-730 Configuration Guide – DOC. 7414B

On-Screen Keyboard

Use the keyboard to make the new entry. Touch Cancel to return to the “Ethernet

Setup – Edit IP Table Entry” screen. Touch the “x” in the text field to clear any

previous entry. Touch to delete the last digit. Touch Save to save a new entry

and return to the “Ethernet Setup – Edit IP Table Entry” screen.

On the “Ethernet Setup – Edit IP Table Entry” screen, touch Save Entry to save the

current entry or Delete Entry to clear it.

If not making any changes, touch to return to the “Ethernet Setup –IP

Table” menu.

Touch again to return to the main setup menu.

Audio Setup

On the main setup menu, touch Audio Setup to display the “Audio Setup” screen.

“Audio Setup” Screen

The “Audio Setup” screen provides controls for muting (or unmuting) the audio,

adjusting level for both Master Volume and Media Volume, as well as a control for

playing a test .wav file. The Media Volume controls adjust H.264 streaming media

level in relation to the Master Volume controls.

Andere Handbücher für TSW-730

Inhaltsverzeichnis

Andere Crestron Touchscreen Handbücher

Crestron

Crestron TSW-550-TTK Maßzeichnung

Crestron

Crestron ST-1550 Bedienungsanleitung

Crestron

Crestron Lsys TPS 2000L Bedienungsanleitung

Crestron

Crestron DualTouch DTT-17 Bedienungsanleitung

Crestron

Crestron DualTouch DTT-15V3 Bedienungsanleitung

Crestron

Crestron TPMC-4SMD-FD Original Betriebsanleitung

Crestron

Crestron STX-1700CXPW Bedienungsanleitung

Crestron

Crestron TSW-570P Bedienungsanleitung

Crestron

Crestron TPMC-10 Bedienungsanleitung

Crestron

Crestron TS-770 Bedienungsanleitung

Crestron

Crestron TPS-FPAR6000L Bedienungsanleitung

Crestron

Crestron TST-902 Maßzeichnung

Crestron

Crestron IM-WCCV Anleitung zur Verwendung

Crestron

Crestron Prodigy PTX3 Bedienungsanleitung

Crestron

Crestron Isys TPS-4L Anleitung zur Verwendung

Crestron

Crestron QM-FTCC Anleitung zur Verwendung

Crestron

Crestron CT-1550 Bedienungsanleitung

Crestron

Crestron Isys TPS-3000 Bedienungsanleitung

Crestron

Crestron TSS-770 Bedienungsanleitung

Crestron

Crestron C2N-FT-TPS4 Bedienungsanleitung

Crestron

Crestron TST-600 Bedienungsanleitung

Crestron

Crestron TPS-1700 Bedienungsanleitung

Crestron

Crestron TSW-70 Series Bedienungsanleitung

Crestron

Crestron MTX-3 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung