3
I
CTC offers solutions for Relay and Protection that provide a visual display of
the machinery vibration values, and also allow a customer-defined input level to
trigger a relay and shut down equipment that is operating out-of-tolerance.
SCD111
The SCD111 Series system monitors a machine’s condition based on its level
of vibration. The system can be integrated into a circuit to shut down a machine
when preset vibration levels are reached. The system detects high vibration
energy sensed via the input accelerometers and actuates relays based on alert
and alarm set points. The system will indicate the instantaneous vibration levels
and relay status at each channel through the display meters. The system also
supplies outputs for Dynamic Vibration data (Waveforms) transmitted by the
accelerometers via the BNCs on the front of the enclosure. The waveforms are
obtained from the BNC jacks located on the front of the enclosure or wired from
screw terminals identified by “Sensor Output.”
The SCD111 Series system is contained within a standard fiberglass enclosure.
Mounting brackets are provided for wall-mounting the enclosure (wall anchoring
screws are not included).
Rated for NEMA 4X (IP66), the SCD111 Series can withstand harsh environments
including temperatures ranging from -58°F to 180°F (-50°C to 82°C). The box is
also resistant to hose-directed fluid and corrosion. A snap latch is installed on
the door allowing the box to be sealed from the elements when not in use.
