Culligan ClearLink Pro Bedienungsanleitung

DRINKING WATER | AGUA POTABLE

ClearLink Pro™

Wireless Filtration Control

Installation and operating instructions

ClearLink Pro™

Control de Filtración de Agua Inalámbrico

Instrucciones de instalación y operación

PRECAUTIONS

WARNING: Follow all precautions indicated in the manual provided with the Culligan water treatment system.

WARNING: For systems using a booster or distribution pump, the pressure of the treated water cannot exceed

the pressure of the cold water supply.

CAUTION: Control box must be protected against freezing temperatures, frost, snow, sleet, and ice.

Exposure to these can produce cracks and product failures.

CAUTION: This product has a limited service life. We recommend that a record be kept regarding the

date of install and any other performed maintenance. Because of the product’s limited service life and

to prevent costly repairs or possible water damage, we strongly recommend that the control box be

replaced every ten years.

WARNING: For cold water use only. Do not use on hot water line.



the system be ushed thoroughly. Let the ltered water run for 5–6minutes before using.









4

2









PARTS

INCLUDED:







3/8" x 1/4" Tube Adapter





SPECIFICATIONS

 

Temperature Range: 40–100°°

English

UNIVERSAL WIRELESS FILTRATION CONTROL

Remote Button

Button Part No.: 01029450

Trim Ring Part Nos.:

Chrome 01029452

Brushed Nickel 01029453

Oil Rubbed Bronze 01029454

Control Box

Part No.: 01029449

Air Gap



Battery Box

Part No.: 01029451

PARTS INCLUDED:

3/8" x 1/4" Tube Adapter



the kitchen faucet and allow all water to drain

from line.

SETTING CAPACITY AND TDS FUNCTION

NOTE: Set capacity and TDS function before starting installation.

NOTE: To access the dip switches for setting capacity and TDS function,

open the control box by removing the three screws in the rear cover.

Find the dip switches on the front of the circuit board.

SW2 and SW3 set the time and capacity for the lter reminder.

SW2: OFF = 500 gallons ON = 1000 gallons

SW3: OFF = 180 days ON = 365 days



The system will measure the dierence between the feed and product

water to determine if the RO is working.

SW1: OFF = Disabled ON = Enabled

SW6 is used for production testing and should be left in the o position.

INSTALLATION

NOTE: Refer to the manual provided with your filter/RO for installation

instructions specific to that system.

NOTE: Some installations may require adapters and ttings not included with

the product. Review the manual and your installation before beginning.

NOTE: Consult your local plumbing codes and install accordingly.

Disconnect the cold water line from the cold water



NOTE: 

is used, you may need to shorten the pipe using

a hacksaw or pipe cutter to accommodate the

control box.

SW6

SW3

SW2

SW1

Connect the inlet on the RO/Filter system to the

port marked "RO/Filter >." Wet the end of the

plastic tubing with water and push it into the

quick connect tting adapter approximately 5/8˝

until it stops.

NOTE: This connection is plugged for remote





NOTE: This is the line that would normally come

from the supply tee or valve.

NOTE: Use the supplied adapter if your system

uses a 1/4" tube.

Connect the outlet on the RO/Filter system to the

port marked "RO/Filter <." Wet the end of the

plastic tubing with water and push it into the

quick connect tting adapter approximately 5/8"

until it stops.

NOTE: This is the line that would normally go to

your dedicated faucet.

NOTE: Connect the tank and/or post lter in

this line if required for your lter/RO system.



valve as shown. Tighten the lower end of cold water

line onto the top of the control box.

NOTE: The control box must be in a

vertical position.

NOTE: If space does not allow for mounting the

control box onto the valve, it can be alternatively

hung on a wall when using the holes on the back



AIR GAP

RO AIR GAP INSTALLATION

NOTE: These steps are only for RO installations using an air gap.

NOTE: If your ltration system is not an RO, skip to System Startup on Page 

NOTE: Install the drain connection to the drain plumbing according to the manual

provided with your RO system.

Connect the drain line coming from the RO

system to the small connection of the air

gap device.



top as possible and in a vertical orientation.

NOTE: Failure to mount the air gap device

vertically will cause it to leak water.

Connect the large tting of the air gap device to

the connection on the drain plumbing.









of the control box.

NOTE: The control box will beep and ash the

power light when powering up.

NOTE:



Conrm that the bypass valve is in the closed



Turn on the cold water supply and check for leaks.

If it leaks, refer to troubleshooting.

Use the provided screw to hang the battery box on

the side of the cabinet.

BYPASS



Turn on the faucet to full cold and push the button

to activate the system.

NOTE: The blue capacity lights should appear if

the button and control box are communicating.

NOTE: The button can be turned o with

a second push or by turning o the faucet.

NOTE: After startup, flush your system

according to manufacturer's specications.

It might take a few cycles for the button to

stay on while air is purged from the system.



remote button.



depending on lter capacity remaining,

6 lights = >80% and 1 light = <10%.

Culligan Logo: Flashes when treated water is not

available from the faucet. Stays solid while treated

water is being dispensed from the faucet.

Alert Indicator: Illuminates when the control box

batteries need replacing, lters need replacing, or

RO membrane needs replacing.

BUTTON DISPLAY GUIDE

CONTROL BOX OPERATION

RESET POWER

REPLACE BATTERIES

REPLACE FILTERS



Reset button for filter capacity.

Power: Flashes green at power up, lter capacity

reset, and while dispensing ltered water. Continues

to ash for 1 minute after the ow of ltered water

has stopped.

Replace Batteries: Flashes red when the batteries

for the control box need to be replaced. This indicator

automatically clears when new batteries are detected.

Replace Filters: Flashes red when the lters have

less than 10% of their life remaining due to ow or

time. This indicator is reset by pressing the reset

button for two seconds.



treated water has a TDS level greater than 25% of

the untreated water. This indicator will automatically

reset when low TDS water is detected.

TROUBLESHOOTING

LEAKS AT FILTER/RO INLET OR OUTLET CONNECTION:

 

and then conrm that the end of the tubing has a clean, square cut.



Low ow rates may not activate the control box electronics. Refer to your system manual to trouble

shoot a low ow condition.



Conrm that the bypass valve is in the down/closed position.



Some materials may block the wireless signal more than others. Try moving the button to an area on



FILTERED WATER FLOW WON'T TURN OFF: Low batteries for the control box can cause the system

to be stuck in the ltered position. The bypass valve can be used to allow unltered water ow to the

faucet while the issue is being corrected.





INTEGRITY

Andere Handbücher für ClearLink Pro

Inhaltsverzeichnis

Sprachen:

Andere Culligan Wasserfiltersystem Handbücher

Culligan

Culligan WSH-C125 Bedienungsanleitung

Culligan

Culligan FM 15 Bedienungsanleitung

Culligan

Culligan RVF-10 Bedienungsanleitung

Culligan

Culligan HF-160 Bedienungsanleitung

Culligan

Culligan WH-S100-O Bedienungsanleitung

Culligan

Culligan Medallist Plus Series Bedienungsanleitung

Culligan

Culligan FM-5 Bedienungsanleitung

Culligan

Culligan SILVER SERIES Bedienungsanleitung

Culligan

Culligan MEDALLIST SERIES Datenblatt

Culligan

Culligan Drinking Water System Bedienungsanleitung

Culligan

Culligan Mark 59 Bedienungsanleitung

Culligan

Culligan US-600 Bedienungsanleitung

Culligan

Culligan SY-2650 Beilage

Culligan

Culligan Iron-Cleer Plus Bedienungsanleitung

Culligan

Culligan FM-25 Bedienungsanleitung

Culligan

Culligan HF-360 Bedienungsanleitung

Culligan

Culligan US-600A Bedienungsanleitung

Culligan

Culligan US-EZ Bedienungsanleitung

Culligan

Culligan US-EZ Bedienungsanleitung

Culligan

Culligan RV-EZ Bedienungsanleitung

Culligan

Culligan Iron-Cleer Bedienungsanleitung

Culligan

Culligan 2001 Gold Series Datenblatt

Culligan

Culligan Smart Controller HE DF 12 Bedienungsanleitung

Culligan

Culligan HD-950A Bedienungsanleitung

Beliebte Wasserfiltersystem Handbücher anderer Marken

Wisy

Wisy LineAir 100 Bedienungsanleitung

Schaffner

Schaffner Ecosine FN3446 Series Betriebsanleitung

Pentair

Pentair FLECK 4600 SXT Benutzerhandbuch

H2O International

H2O International H20-500 Bedienungsanleitung

Renkforce

Renkforce 2306241 Bedienungsanleitung

Neo-Pure

Neo-Pure TL3-A502 Bedienungsanleitung

FLTR

FLTR OBF Bedienungsanleitung

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Bedienungsanleitung

Applied Membranes

Applied Membranes W-G844EM Bedienungsanleitung

BEGA

BEGA 116 Bedienungsanleitung

WATA

WATA Standard Bedienungsanleitung

Price

Price FFU series Handbuch

Gaggenau

Gaggenau BRITA INTENZA 467873 Bedienungsanleitung

Brita

Brita SAFF-100 Bedienungsanleitung

HEISSNER

HEISSNER FPU24000-00 Bedienungsanleitung

BGS technic

BGS technic 1518 Bedienungsanleitung

Reverse Osmosis

Reverse Osmosis RF Series Bedienungsanleitung

ubbink

ubbink Filtramax Series Bedienungsanleitung