Thank you for purchasing the CW Grilles
Installation Guide
Part # 4331
(-1, Brushed; -2, Polished; -3, Black)
This model fits:
1970 Ford F150/250
4331.
4305 E 140th Street, Grandview, MO 64030
Brackets Included
(2) B-4331-5 BRACKETS
(2) B-4331-6 BRACKETS
(4) B-4331-7 BRACKETS
Hardware Included
(16) #8 X 5/8 PHILIPS HEAD SCREWS
(16)#8 U-CLIP
STEP 1 Remove the stock “egg
crate” sections by removing the
(4) per side screws as shown
above. If you are using your old
stock shell you will need to
remove the inner plastic screw
retainers.
STEP 2 Remove brackets from
hardware pack. Place supplied u-
clips on all ends of the supplied
brackets. Attach the (4) identical
top brackets to mounting tabs in
shell using the supplied #8 x
5/8” Phillip screws as shown
above.
STEP 3 Locate the (2) brackets
that have a slightly longer end
than the other. These brackets
attach to the outer most mounting
tab per side in the stock shell.
Attach the shorter end to the
stock shell using the supplied #8
x 5/8” Phillip screws as shown
above.
STEP 4 Attach the remaining (2)
brackets to the inner (2)
mounting tabs in stock shell per
side using the supplied #8 x 5/8”
Phillip screws as shown above.
STEP 5 With all brackets
attached simply attach billet
grille to brackets using the
supplied #8 x 5/8” Phillip screws.
For installation of billet grilles that require cutting of the stock shell, proper tools, knowledge and skill are needed. CW is not responsible for care & accuracy of the installation, only for Fit & Finish of its products. Use a
qualified installer or contact original vendor for references to complete all instructions.
