CYP CS-803MDP Bedienungsanleitung
CS-803MDP
Mini-DisplayPort to HDMI Scaler
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2015 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
RDV1 08/11/12 Preliminary release
VS1 28/06/16 Updated text/diagrams
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel ........................................2
6.2 Rear Panel.........................................3
6.3 OSD Menu.........................................4
7. Connection Diagram ............................ 5
8. Specications ........................................ 6
9. Acronyms ............................................... 6
1
1. INTRODUCTION
The Mini-DisplayPort to HDMI scaler allows you to display the output of
any standard DisplayPort 1.1 source (such as Mac laptops) on HDMI
TVs or monitors. This unit also supports converting DisplayPort audio
(up to LPCM 2.0) to HDMI audio. Perfect for use in boardrooms or
for individuals and professionals at home or in the ofce who need
increased compatibility between their equipment.
2. APPLICATIONS
• Boardrooms or classrooms with HDMI-only displays
• Connecting DisplayPort sources to easier to nd and less expensive
HDMI display devices
3. PACKAGE CONTENTS
• 1×Mini-DisplayPort to HDMI Scaler
• 1×5 V/2.6 A Power Adaptor
• 1×Operation Manual
4. SYSTEM REQUIREMENTS
• DisplayPort source equipment such as Mac laptops or PCs with
DisplayPort output cards.
• HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
5. FEATURES
• DisplayPort signal conversion and scaling to HDMI output
• Supports DisplayPort 1.1 signals up to 2560×1600@60Hz
• Quick keys switch to 720p or XGA resolution
• OSD control
• Audio output supports up to LPCM 2.0@48kHz
• Output audio mute functionality
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWERMENU
ENTER
-
+
XGA
720P
3 41 2
1MENU/ENTER
Press to enter the OSD menu, or to conrm selections within the
OSD.
Note: Press the ENTER and “-” buttons together to switch the
output resolution to 720p60. Press the ENTER and “+” buttons
together to switch the output resolution to XGA.
2MINUS (-)
a. Press this button to move down within the OSD menu.
b. When not in the OSD menu, press this button to display
information about the current input and output signals.
3PLUS (+)
a. Press this button to move up within the OSD menu.
b. When not in the OSD menu, press this button to mute/un-mute
the audio output.
4POWER
The LED will illuminate GREEN to indicate the unit is on and
receiving power.
3
6.2 Rear Panel
HDMI OUT
SERVICE MDP IN DC 5V
42 31
1HDMI OUT
Connect to HDMI TVs, monitors or ampliers for digital video and
audio output.
2SERVICE
This slot is reserved for rmware update use only.
3MDP IN
Connect to DisplayPort source equipment such as Mac laptops
or PCs with DisplayPort output cards using a DisplayPort to Mini-
DisplayPort adapter cable if necessary.
Note: Audio support depends on source device compliance.
If there is no audio after changing the input source’s output
resolution please remove and re-connect the Mini-DisplayPort
cable to force an audio support compliance renegotiation.
4DC 5V
Plug the 5V DC power adapter into the unit and connect it to an
AC wall outlet for power.
4
6.3 OSD Menu
MAIN MENU SUB MENU
Output Resolution 720×480P
1280×720P
1920×1080P
640×480
800×600
1024×768
1280×1024
1600×1200
1920×1200
By Native
Exit
Info. OSD Mode Off
On
Exit
Audio Mute -
About CS-803MDP FW Ver.
Factory Reset System Reset (720p60/Un-mute)
Exit -
Note: When the output timing is set to “By Native”, but the detected
timing does not match a supported resolution, the output will be set to
1280×720p60 automatically.
5
7. CONNECTION DIAGRAM
HDMI OUT
SERVICE MDP IN DC 5V
HDTV
HDMI Output
Mini-DisplayPort
Input
Laptop
Power Supply
Inhaltsverzeichnis
Andere CYP Medienkonverter Handbücher
CYP
CYP n-TECH SOLUTIONS nT15BX02/CLUX-11CD Bedienungsanleitung
CYP
CYP CSDI-12SR Bedienungsanleitung
CYP
CYP CP-1261D Installationshandbuch
CYP
CYP CP-304 Bedienungsanleitung
CYP
CYP CPRO-2E4KS Bedienungsanleitung
CYP
CYP CSC-103TXPL Bedienungsanleitung
CYP
CYP CMDPH-1A Bedienungsanleitung
CYP
CYP CP-255ID Bedienungsanleitung
CYP
CYP CLUX-DVI2SDIA Bedienungsanleitung
CYP
CYP CSC-6011 Bedienungsanleitung
CYP
CYP CP-280H Bedienungsanleitung
CYP
CYP CLUX-14S Bedienungsanleitung
CYP
CYP CSC-5500 Bedienungsanleitung
CYP
CYP AU-D1D Bedienungsanleitung
CYP
CYP AU-D4T Bedienungsanleitung
CYP
CYP PRO-H2SDI Bedienungsanleitung
CYP
CYP DCT-1D Bedienungsanleitung
CYP
CYP SY-300H Bedienungsanleitung
CYP
CYP CPT-380 Bedienungsanleitung
CYP
CYP CPRO-12ES Bedienungsanleitung
