CYP CSC-5501 Bedienungsanleitung
CSC-5501
HDMI/DP/VGA to Dual HDMI Scaler
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
VERSION HISTORY
REVISION DATE SUMMARY OF CHANGE
VS1 09/11/18 Final technical review
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................2
5. Features............................................................2
6. Operation Controls and Functions.................3
6.1 Front Panel ................................................. 3
6.2 Rear Panel.................................................. 4
6.3 Remote Control......................................... 5
6.4 OSD Menu.................................................. 6
6.5 WebGUI Control ...................................... 21
6.6.1 Main Page 0 ................................... 22
6.6.2 Main Page 1 ................................... 24
6.6 RS-232 Control ......................................... 26
6.7 Telnet Control .......................................... 26
6.8 RS-232 and Telnet Commands .............. 27
7. Connection Diagram ....................................46
8. Specications ................................................47
8.1 Technical Specications ........................ 47
8.2 Video Specications............................... 48
8.3 Audio Specications............................... 49
8.4 Cable Specications .............................. 50
9. Acronyms .......................................................51
1
1. INTRODUCTION
This Multi-Format Scaler has DisplayPort, HDMI and PC (VGA) inputs
which can be freely selected for output at a scaled resolution of the
user’s choosing over the mirrored HDMI outputs. This unit also includes
breakout analog and digital audio outputs to provide additional
playback exibility. Support for HDMI output resolutions up to 1080p/
WUXGA (RB) and Analog to Digital Conversion (ADC) functionality
combine to allow for a wide range of AV signals to be displayed on
the connected HDMI displays.
Beyond video switching and scaling, this unit also features useful audio
functions. An integrated audio DSP with gain control for routing audio
and controlling background audio levels (LPCM 2.0 only) adds to the
versatility of this product. This unit can be controlled via front panel
buttons with an On-Screen Display (OSD), WebGUI, Telnet, and RS-232
making it exceptionally versatile.
2. APPLICATIONS
• Analog and Digital source integration
• Upscaling standard denition sources for high-denition displays
• Conference centers
• Lecture halls
• Schools and universities
3. PACKAGE CONTENTS
• 1×HDMI/DP/VGA to Dual HDMI Scaler
• 1×24V/2.7A DC Power Adapter
• 1×Power Cord
• 1×Remote Control (CR-176)
• 1×Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI, DisplayPort or VGA source equipment such as media players,
video game consoles, PCs, or set-top boxes.
• HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
• The use of “Premium High Speed HDMI” cables is highly
recommended.
5. FEATURES
• HDMI 1.3, DisplayPort 1.1, and DVI 1.0 compatible
• HDCP 1.x compliant
• Multiple video and audio inputs: 1 DisplayPort, 2 HDMI, 2 VGA, and
3 stereo audio
• Mirrored HDMI outputs
• Supports input and output resolutions up to 1080p/WUXGA (RB)
• Frame rate conversion support
• Analog to digital (ADC) and digital to analog (DAC) audio
conversion, insertion and extraction
• Analog stereo and digital coaxial breakout audio outputs
• Supports pass-through of LPCM 2.0 audio
• Audio DSP with gain control for routing audio and controlling
background audio levels
• Comprehensive EDID and HDCP management
• Remote control provides discrete input source selection
• Controllable via front panel controls with OSD, RS-232, Telnet,
WebGUI, and IR remote
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1122
POWERDP HDMIVGA
MENU– +ENTER
XGA
720P
Multi-Format to HDMI Scaler
1 2 3 54 6
1POWER Button & LED: Press this button to power the unit on (Green
LED) or place it into stand-by mode (Red LED).
2IR Window: Accepts IR signals from the included IR remote for
control of this unit only.
3DP/HDMI 1~2/VGA 1~2 Buttons & LEDs: Press any of these buttons
to switch immediately to the corresponding input. An LED will
illuminate to indicate which source is currently selected.
4MENU Button: Press to enter the OSD menu, or to back out from
menu items.
Note: Pressing and holding the “MENU” button while connecting
the power supply will reset all settings to the factory defaults.
Pressing “MENU” and “+” together will reset the output resolution to
XGA (1024×768@60Hz). Pressing “Menu” and “−“ together will reset
the output resolution to 720p@60Hz.
5 − (MINUS) & + (PLUS) Buttons: Press to move up and down or adjust
selections within menus.
Note: When not in the OSD, pressing “−” will activate the Auto
Adjust function for VGA sources. Pressing “+” will briey show the
OSD information display.
6ENTER Button: Press to conrm a selection within the OSD or to go
deeper into a menu item.
4
6.2 Rear Panel
CONTROL
SERVICE RS-232
INPUT OUTPUT
HDMI BHDMI A
AUDIOAUDIOCOAX
DC 24V
12
3
HDMI
DP 1122
AUDIO
VGA
1
2
3
4
V+
GND
GND GND
V+
621
34 5
1DP INPUT Port: Connect to DisplayPort source equipment such as a
PC or laptop.
Note: In some rare cases, digital DisplayPort audio can’t be
supported. In those cases, please use analog audio input 1.
HDMI INPUT 1~2 Ports: Connect to HDMI source equipment such as
media players, game consoles or set-top boxes.
VGA INPUT 1~2 Ports: Connect to VGA source equipment such as
PCs or laptops.
AUDIO INPUT 1~3 Ports: Connect to the stereo analog outputs of
devices such as CD players or PCs.
Note: In “Audio Follows Video” mode, Audio 1 maps to the digital
inputs (DisplayPort, HDMI 1 & HDMI 2), Audio 2 maps to VGA 1 and
Audio 3 maps to VGA 2.
2HDMI A~B OUTPUT Ports: Connect to HDMI TVs, monitors or
ampliers for digital video and audio output.
Note: Both outputs carry the same video and audio content.
AUDIO 1~2 OUTPUT Ports: Connect to powered speakers or an
amplier for stereo analog audio output.
Note: Both outputs carry the same audio content.
COAX OUTPUT Port: Connect to powered speakers or an amplier
for digital audio output using an appropriate coaxial cable.
3SERVICE Port: This slot is reserved for rmware update use only.
4RS-232 Port: Connect directly to a PC, laptop or other serial control
device to send RS-232 commands to control the unit.
5
5CONTROL Port: Connect directly, or through a network switch, to
your PC/laptop to control the unit via Telnet/WebGUI.
6DC 24V Port: Plug the 24V DC power adapter into this port and
connect it to an AC wall outlet for power.
6.3 Remote Control
1POWER: Press this button to power the unit
on or place it into stand-by mode.
2DP/HDMI 1~2/PC 1~2: Press any of these
buttons to switch immediately to the
corresponding input.
3MENU: Press this button to enter the OSD
menu.
4EXIT: Press this button to exit the menu or
the current selection in the OSD menu.
5 OK/▲/▼/◄/► & VOL/−/+: Press OK to
conrm the selection or press the arrow
buttons to navigate the OSD menu. When
the OSD menu is not active, use the LEFT/
RIGHT (◄/►) buttons to control the volume
level.
6AUTO ADJUST: Press this button to activate the Auto Adjust function
for VGA sources.
7RESET: Press this button to reset the device back to the default
settings.
CR-176
OK
POWER
PC 1PC 2
HDMI 1HDMI 2DP
+
-
VOL
EXIT
RESET
MENU
AUTO
ADJUST
1
2
34
7
5
6
Inhaltsverzeichnis
Andere CYP Medienkonverter Handbücher
CYP
CYP CSLUX-300 Bedienungsanleitung
CYP
CYP CDB-6HR Bedienungsanleitung
CYP
CYP CDM-150 Bedienungsanleitung
CYP
CYP CP-252 Bedienungsanleitung
CYP
CYP CSC-200RS Bedienungsanleitung
CYP
CYP CP-1262HAT Bedienungsanleitung
CYP
CYP CDPS-41SQ Bedienungsanleitung
CYP
CYP AU-D150 Bedienungsanleitung
CYP
CYP CS-802D Bedienungsanleitung
CYP
CYP CP-280H Bedienungsanleitung
CYP
CYP CLUX-SDI2HCA Bedienungsanleitung
CYP
CYP SY-P290 Bedienungsanleitung
CYP
CYP CLUX-11CA Bedienungsanleitung
CYP
CYP CV-401V Bedienungsanleitung
CYP
CYP SY-398H Bedienungsanleitung
CYP
CYP CPT-387HD Bedienungsanleitung
CYP
CYP CLUX-SDI2DVIA Bedienungsanleitung
CYP
CYP CP-293 Bedienungsanleitung
CYP
CYP DCT-4N Bedienungsanleitung
CYP
CYP CLUX-1HLR Bedienungsanleitung
