CYP CFSW-51MHL Bedienungsanleitung
CFSW-51MHL
5 by 1 HDMI/MHL Fast Switcher
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 01/04/11 Preliminary Release
VS1 22/03/13 Updated format/diagrams
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 Remote Control................................5
6.4 RS-232 Protocol.................................6
6.5 Remote Command Protocol..........7
7. Connection Diagram ............................ 8
8. Specications ........................................ 9
9. Acronyms ............................................... 9
1
1. INTRODUCTION
The 5 by 1 HDMI/MHL Fast Switcher has MHL (Mobile High-Denition
Link) interface integrated on its fth input which can be used to
share high denition video and audio from any of your MHL-ready
mobile devices on an HDTV, and simultaneously charge the device
whilst connected. The switcher supports 3D signal up to 2.25Gbps
bandwidth, 12-bit Deep Color, Hi-Def lossless audio and other features
dened by HDMI specications, on all of its 5 input. Source selection
can be easily controlled through on-panel buttons, IR remote control
or by RS-232 protocol.
2. APPLICATIONS
• Smart home entertainment
• Show room or meeting room
• Smart AV installation
• Mobile device integration
3. PACKAGE CONTENTS
• 1× 5 by 1 HDMI/MHL Fast Switcher
• 1×5V DC Power Adaptor
• 1×IR Extender Cable
• 1×MHL to HDMI Cable
• 1×Remote Control with Battery (CR-113)
• Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI sources such as PS3 or Blu-ray players for ports 1 to 5 using
standard HDMI cabling. The fth port can be connected to an MHL-
ready mobile device with an MHL to HDMI cable.
• HDMI equipped display.
2
5. FEATURES
• Supports InstaPort Technology™
• Supports ve HDMI input ports, the fth port is an HDMI/MHL port
• Supports one HDMI output
• Supports video resolutions up to 1080p@60 Hz
• Supports HDMI specication features, including data rates up to
2.25Gbps and12-bit Deep Color
• Supports 3D signal
• MHL port supports 1080p@30 Hz or 1080i@60 Hz resolutions
• MHL port supports charging of a connected mobile device
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
5X1 HDMI/MHL FAST SWITCHER CFSW-51MHL
54321
POWER
INPUT
1 2 3
1IR
Receiver
Supports reception of IR codes from the system's IR remote control
only.
2INPUT
Press the 'INPUT' source button to select the required input source,
the blue LED will indicate the selected source.
3POWER
Press this button to switch the device 'ON' or press it again to put
it into standby mode. When the system is on the green LED will
illuminate.
4
6.2 Rear Panel
DC 5V
54321
MHL/HDMI
HDMI IN
HDMI OUT
RS232
IR IN
1 2 3 4 5
1IR IN
Connect to the supplied IR extender cable for receiving the IR
remote signal for this device only.
2RS232
Connect to a PC or control system with D-Sub 9-pin cable for RS-
232 control. For RS-232 commands please refer to section 6.4.
3HDMI OUT
Connect to LCD TV or HD monitor with an HDMI cable.
4HDMI IN
Connect HDMI sources to the HDMI inputs 1 to 5 such as DVD
players, Blu-ray players, PS3s or other sources with HDMI cables. The
fth input can be used to connect to HDMI or MHL-Ready mobile
devices.
Note:WhenanMHLdeviceisconnectedtothefthMHL-ready
inputitwillbechargedautomatically.IftheMHLdeviceisswitched
offwhenconnected,itwillbeturnedonautomatically.
5DC 5V
Connect the DC 5V power supply into the system and plug the
adaptor to an AC wall outlet.
5
6.3 Remote Control
1Power
Press this button to switch the
device on or to put the device
into standby mode.
2HDMI 1~5
HDMI Input selection keys. Press a
key to directly select that input.
Note:Forthismodelonlykeys1~5
areactive.
3Mute/Vol +/Vol -
These buttons control the volume
level or mute the audio from the
MHL mobile device or CEC-enabled source devices connected to
MHL input port.
4
These buttons can control what is playing on the MHL input source
(including CEC-enabled source devices or MHL mobile device),
play/pause and track skip forward/backwards.
Note:InordertocontroltheMHLmobiledevice,thescreentime-
outsettingmustbesetto'OFF'.
5Input
Press this button to cycle through the input selections (from 1~5).
6Menu
Press this button to enter the input source's root menu (including
CEC-enabled source devices or MHL device).
7▲▼◄► & Enter
These buttons will control the input source's OSD menu selection.
Note:Forthesystemtocontrolfunctions3~6,theinputsource
devicemustbeanHDMICEC-enableddevicewithitsCECfeature
turnedon.Pleaserefertothemanualforthesourcedeviceforthe
instructions.
8Exit
Press this button to exit the selection.
Menu
Input
HDMI 1HDMI 2HDMI 3
HDMI 6
HDMI 4HDMI 5
Vol +
HDMI 7HDMI 8
Mute
Vol -
Exit
Enter
CR-113
1
2
4
5
7
3
6
8
Andere Handbücher für CFSW-51MHL
2
Inhaltsverzeichnis
Andere CYP Schalten Handbücher
CYP
CYP EL-C61C Bedienungsanleitung
CYP
CYP CM-345TP Bedienungsanleitung
CYP
CYP EL-5400D Bedienungsanleitung
CYP
CYP OR-HD62CD-4K22 Bedienungsanleitung
CYP
CYP EL-42PIP Bedienungsanleitung
CYP
CYP CDPS-U4H4HSA Bedienungsanleitung
CYP
CYP CPLUS-401V Bedienungsanleitung
CYP
CYP CMLUX-4H4CAT Bedienungsanleitung
CYP
CYP CLUX-4S2 Bedienungsanleitung
CYP
CYP CLUX-41AP Bedienungsanleitung
CYP
CYP EL-41S-4K22 Bedienungsanleitung
CYP
CYP CPLUS-31PS Bedienungsanleitung
CYP
CYP EL-42S Bedienungsanleitung
CYP
CYP EL-42HEAC Bedienungsanleitung
CYP
CYP CMSI-8D8DSA Bedienungsanleitung
CYP
CYP AU-D21 Bedienungsanleitung
CYP
CYP MED-AS60 Bedienungsanleitung
CYP
CYP MA-U42 Bedienungsanleitung
CYP
CYP PU-8H8HBT Bedienungsanleitung
CYP
CYP EL-31SY Bedienungsanleitung
