CYP EL-5500-HBT Bedienungsanleitung

EL-5500-HBT

8 x 4 HDBaseT™ / HDMI / VGA Presentation Switch

(With switchable digital bypass output)

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sucient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 24/09/14 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features..................................................7

6. Operation Controls and Functions.......8

6.1 Front Panel................................................... 8

6.2 Rear Panel..................................................... 9

6.3 Remote Control .......................................10

6.4 RS-232 Pin Assignment..........................11

6.5 RS-232/Telnet Commands....................12

6.6 OSD Menu ..................................................15

7. Connection Diagram .......................... 19

8. Specications...................................... 20

8.1 Input Resolution Support.....................20

8.2 Input Resolution Support.....................21

8.3 Output Resolution Support.................22

1. INTRODUCTION

The EL-5500-HBT is an advanced rack mountable HDBaseT™, HDMI,

VGA, Composite, and Component presentation switcher. This device

can scale and switch eight input sources to it's two HDMI outputs and a

single HDBaseT output, with their associated audio signals to the native

resolutions supported by the connected display. This presentation switch

also features a switchable digital bypass output allowing any HDMI or

HDBaseT input to be directly bypassed via the HDMI bypass output.

Control is via the IR remote, RS-232, IP, or via manual selection buttons.

Both digital and analogue stereo audio is supported via a built-in DAC

(Digital to Analogue Converter) and ADC (Analogue to Digital Converter)

providing exible audio signal integration. The EL-5500-HBT is the perfect

solution for any educational or commercial environment requiring

integration of multiple sources and signal formats to two HDMI displays.

2. APPLICATIONS

Home Theater/Entertainment

Lecture Room/Hall Presentation

Show Room/Demo Room

Public Commercial Display

Information Board

3. PACKAGE CONTENTS

1×8 by 4 Presentation Scaler

1×IR Extender Cable

1×IR Receiver Cable

1×Remote Control with Battery

1×24V/ 2.7A DC Power Adaptor

1×Power Cord

Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipment such as Blu-ray/DVD/PS3 player or Set-Top-Box

and output HDMI TV/Display and or audio amplier with connection

cables.

5. FEATURES

HDMI, HDCP, and DVI compliant

Digital to Analogue & Analogue to Digital Audio conversion (DAC/ADC)

Supported Resolutions: HDTV: 480i to 1080p PC: VGA to WUXGA

Aspect Ratio Adjustment

Motion Adaptive De-interlace (3D)

Video Noise Reduction

Underscan / Overscan Selection

Picture Adjustment Settings

HDBaseT Input/Outputs support PoE (Power over Ethernet) through to

compatible connected receiver

Independent HDMI bypass output (switching digital inputs only)

Supports HDBaseT LAN Serving function

Supports IR/RS-232/IP and front panel button control

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

123456

PC CV

MENU ENTER

HDMI CA5e/6/7 HDMI CAT5e/6/7

123456

12345678

CVPC

BYPASS

INPUT

1 2 3 65 7 8 10 3

6 79

1POWER: Press this button to turn ON the device and the LED will

illuminated.

2IR Window: This IR receiver receives only the remote control signal

from the packaged included remote control.

3INPUT HDMI 1~4 & LED: Press the IN buttons to select an input

source signal from the 4 HDMI input sources to be display for output

ports. The LED will illuminate according to the selection.

4BYPASS & LED: Press these buttons to select an input source signal

from the 6 input sources to be display for BYPASS output port. The

LED will illuminate according to the selection.

5INPUT CAT5e/6/7 5~6 & LED: Press the IN buttons to select an input

source signal from the 2 CAT5e/6/7 input sources to be display for

output ports. The LED will illuminate according to the selection.

6INPUT PC & LED: Press this button to select PC input source signal to

be display for PC output port. The LED will illuminate according to the

selection.

7INPUT CV & LED: Press this button to select CV input source signal s

to be display for CV output port. The LED will illuminate according to

the selection.

8MENU: Press this wheel to enter into the menu and press it again to

conrm the selection.

9+/-: Press these buttons to move up/down under menu selection or

under volume control to adjust audio volume up/down.

10 ENTER: Press this button to conrm menu selection.

6.2 Rear Panel

IR IN

HDMI 1HDMI 2

SERVICE 2

COAX

AUDIO

AUDIO AUDIO 7AUDIO 1 AUDIO 2 AUDIO 3 AUDIO 4

HDMI

BYPASS

CAT5e/6/7CAT5e/6/7 CAT5e/6/7 PC

HDMI 1 HDMI 2 HDMI 3HDMI 45 67

INPUT RLCV

LAN

RS-232

DC 24 V

OUTPUT

IR OUT

SERVICE 1

ON OFF

DSP PROG.

2 6 8 13 14 16

5 7

3 7 9 10 12 15 17114

1IR OUT: Connect to the supplied IR Blaster cable for IR signal

transmission. Place the IR Blaster in direct line-of-sight of the

equipment to be controlled.

2IR IN: Connect to the supplied IR Extender cable for IR signal

reception. Ensure that remote being used is within the direct line-of-

sight of the IR Extender.

3OUTPUT CAT5e/6/7: Connect to the Receiver unit with a Single

CAT5e/6/7 cable for transmission of all data signals.

4OUTPUT HDMI: Connect to a HDMI equipped TV/monitor for display

of the HDMI input source signal.

5OUTPUT COAX: Connect to audio sound equipment such as speaker

or amplier for audio sound output.

6OUTPUT AUDIO: Connect to audio sound equipment such as speaker

or amplier for audio sound output.

7SERVICE 1& 2: These slots are reserved for rmware update use only.

8DSP PROG Switch: This switch is reserved for rmware update use

only.

9BYPASS: Connect to a HDMI equipped TV/monitor or DVI equipped

monitor with audio sound equipment such as speaker for both video

and audio output display.

10 INPUT HDMI 1~4 & AUDIO 1~4: Connect to HDMI source equipment

such as DVD or Blu-ray player along or to DVI source equipment along

with audio source signal.

11 INPUT CAT5e/6/7: Connect this port to HDMI to CAT5e/6/7

Transmitter with CAT5e/6/7 cable to extend the signal up to 100m.

12 INPUT PC & AUDIO: Connect this port to PC/Laptop with audio signal

for input signal selecting.

13 INPUT CV: Connect this port to source equipment such as video

player or Set-Top-Box for input signal selecting.

14 RS-232: Connect from PC/Laptop for RS-232 command sending to

control the device.

15 LAN: Connect from PC/Laptop with active internet service for Web

GUI control with RJ-45 terminated cable.

16 POWER Toggle: Switch this toggle to turn ON and OFF the device’s

power.

17 DC 24V: Connect the adaptor with power cord included in the

package and connect to AC wall outlet for power supply.

6.3 Remote Control

1POWER:

Press this button to switch the device

ON or to put the device into Standby

mode.

2MUTE:

Press this button to mute output audio

sound.

3INPUT:

Press these buttons one time each to

select input source for outputs display.

4MENU:

Press this button to enter into the On-

Screen Menu.

5EXIT:

Press this button to exit menu

selection.

6▲▼◄► & OK:

Press OK to conrm the selection or use

the directional buttons to navigate the On-Screen-Menu.

MUTE

CAT5e/6/7

POWER

EXIT MENU

RESET ADJUST

CR-135

HDMI 1 CAT5e/6/7 1

HDMI 2

HDMI 3

CAT5e/6/7 2

HDMI 4

HDMI 1 1PC

HDMI 2 2CV

HDMI 3

INPUT

BYPASS

Inhaltsverzeichnis

Andere CYP Schalten Handbücher

CYP

CYP CLUX-31GAME Bedienungsanleitung

CYP

CYP CLUX-41W Bedienungsanleitung

CYP

CYP CSDI-42 Bedienungsanleitung

CYP

CYP CPRO-3D42S Bedienungsanleitung

CYP

CYP CH-2537TXM-TB Bedienungsanleitung

CYP

CYP EL-5400D Bedienungsanleitung

CYP

CYP CMSI-8D8DSA Bedienungsanleitung

CYP

CYP EL-41PIP Bedienungsanleitung

CYP

CYP EL-C41C Bedienungsanleitung

CYP

CYP EL-41X Bedienungsanleitung

CYP

CYP EL-5500 Bedienungsanleitung

CYP

CYP AU-11CA Bedienungsanleitung

CYP

CYP CSC-5300 Bedienungsanleitung

CYP

CYP AU-D41 Bedienungsanleitung

CYP

CYP CSO-T2 Bedienungsanleitung

CYP

CYP EL-M31TT-4K22 Bedienungsanleitung

CYP

CYP EL-31TT-4K22 Bedienungsanleitung

CYP

CYP DCT-31 Bedienungsanleitung

CYP

CYP EL-41PIP Bedienungsanleitung

CYP

CYP CPRO-3D41GAME Bedienungsanleitung

CYP

CYP EL-21SY Bedienungsanleitung

CYP

CYP PU-8H8HBT Bedienungsanleitung

CYP

CYP EL-C61C Bedienungsanleitung

CYP

CYP CSSW-91WF Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung