CYP CED-1M Bedienungsanleitung
CED-1M
HDMI EDID Emulator
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.0 September 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 14/11/13 Preliminary Release
VR1 21/04/14 Default EDID DVI Audio Cancel
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 Factory Default EDID ......................5
6.4 EDID Application Installation ..........5
7. Connection Diagram .......................... 12
8. Specications ...................................... 13
9. ACRONYMS .......................................... 14
1
1. INTRODUCTION
The HDMI EDID Emulator is designed to manipulate the HDMI/DVI EDID
information to be provided to source device for it to know capabilities
of the connected display equipment and output the Video/Audio
signal accordingly.
Aiming to simplify the technical complications involved in Video/Audio
system integration, home theater installation, Video/Audio equipment
testing and experiment, the model provides selections of the Learning
function to Read/Write the Video/Audio EDID to the system. It also
supports EDID Emulator and Bypass modes.
2. APPLICATIONS
• HDMI/DVI EDID manipulation
• Video/Audio system integration and home theater installation
• Video/Audio equipment testing
3. PACKAGE CONTENTS
• HDMI/DVI EDID manipulation
• Mini USB to USB Type A Cable
• Operation Manual
4. SYSTEM REQUIREMENTS
Video/Audio source device, TV/display equipment with HDMI input
and output.
2
5. FEATURES
• Compliant with HDMI and DVI 1.0 standards
• Supports HDMI features:
■ High Video bandwidth up to 300MHz (9Gbps)
■ Resolutions up to 1080p@60Hz & 4Kx2K@24/30
■12-bit Deep Color
■ LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission (32-192kHz sample rate)
• EDID:
■Read: Read display’s EDID
■ Write: Overwrite existing TV/display’s EDID (TV/display need to
support overwrite function)
■Emulator: The source device will read EDID from the system
■Bypass: Source device read EDID directly from TV/display
• Supports 8 sets of Default EDID
• Supports DVI source by using HDMI to DVI adaptor or cable
• CEC and EDID pass-through
• Power supported by USB or HDMI input
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1234
Learned
Select HDMI IN
5678
Default
1 42 3
1LED indicators 1~8: Each LED indicates each EDID selection
when in Learned or Default mode. Press [Select] button to switch
between 1 to 8 memories, the LED will illuminate accordingly to the
selection. Default EDID please refer to 6.3 Factory Default EDID.
2Learned/Default:
Select Learned to save HDMI output's EDIDs up to 8 different
sets, to learn EDID please refer to 6.2 EDID Switch: Read.
Select Default to use the built-in EDID, press Select button to
choose from 1~8. Detail EDID please refer to 6.3 Factory Default
EDID.
3Select:
Press for 3 seconds to switch in between the Learned and
Default mode, the LED will illuminated accordingly.
Then press repeatedly to select in between EDID 1~8.
4HDMI IN: Connect with HDMI source equipment such as DVD/Blu-
ray or PS3 player. When the source equipment is connected with
power supply it can also trigger the device to activate.
4
6.2 Rear Panel
HDMI OUT USB
EDID
Wr.
Bypass
Emulator
Rd.
STATUS
SET
1 2
1 2 3 4 5
1HDMI OUT: Connect to HDMI TV/display.
2USB: Connect Mini-USB cable to an active USB device to power the
system. Or the device may also be triggered by an activate HDMI
input source.
3EDID SET: Press to execute EDID Read/Write function.
4EDID STATUS LED: Indicate EDID Read/Write status.
5EDID Switch:
√ Read:
Connect a display to HDMI output for EDID reading.
Switch to Emulator rst then to Rd. position.
Press [Select] button for 3 seconds to select Learned mode.
Press [Select] repeated to select an EDID storing number from
1~8.
Press [SET] button for 3 seconds to write HDMI output's EDID
correspondingly to the LED indicator.
When Status LED illuminate in Green that means learning
successfully, when in Red that means learning failed.
√ Write:
Connect a display to HDMI output for EDID writing.
Switch to Emulator rst then to Wr. position.
Press [Select] button to select a memory EDID from Learned/
Default 1~8 EDID.
Press [SET] button for 3 seconds to overwrite HDMI TV/display's
EDID and the LED will blink during the writing. When the STATUS
LED illuminate in Green that means writing successfully, when in
5
Red that means writing failed. If the STATUS LED did not blink and
illuminate in Red it means TV's EDID is not writable.
NOTE: Once overwrite is successfully done the original EDID will be
erased. Please be caution when using this function.
√ Emulator: When DIP switch selected to Emulator position, the
source device will read system’s current selected 1~8 EDID.
Change to other EDID, please follow LED indicators 1~8 steps.
√ Bypass: When DIP switch selected to Bypass position, the HDMI
input Video/Audio source device will read HDMI output TV/
display’s EDID directly.
6.3 Factory Default EDID
LED NO. Video Audio
1 DVI
21080p@60Hz, 8-bit LPCM 2CH
31080p@60Hz, 12-bit Deep Color LPCM 2CH
4 3D/1080p@60, 12-bit Deep Color LPCM 2CH
54K2K@24, 25, 30 LPCM 2CH
6 1080p@60, 8-bit LPCM 5.1CH
73D/1080p@60, 12-bit Deep Color Dolby TrueHD/DTS-HD
Master Audio
84K2K@24, 25, 30/3D Dolby TrueHD/ DTS-HD
Master Audio
6.4 EDID Application Installation
EDID Application Installation
The following section lists the procedures to follow when installing
the EDID application to HDMI EDID Emulator. Please follow the step
accordingly to launch the installation successfully.
Download/Insert the software application le and double click on the
“setup” le.
Andere Handbücher für CED-1M
1
Inhaltsverzeichnis
Andere CYP Schalten Handbücher
CYP
CYP EL-C61C Bedienungsanleitung
CYP
CYP CSC-6030CVE Bedienungsanleitung
CYP
CYP CPLUS-31PS Bedienungsanleitung
CYP
CYP CLUX-4S2 Bedienungsanleitung
CYP
CYP OR-HD62CD Bedienungsanleitung
CYP
CYP CPLUS-401V Bedienungsanleitung
CYP
CYP CH-1539TXPLPD Bedienungsanleitung
CYP
CYP PU-1H2HBTE Bedienungsanleitung
CYP
CYP EL-41SY Bedienungsanleitung
CYP
CYP CH-21 Bedienungsanleitung
CYP
CYP CLUX-42SA Bedienungsanleitung
CYP
CYP CDPS-41SQ Bedienungsanleitung
CYP
CYP CLUX-41AT Bedienungsanleitung
CYP
CYP EL-41AT Bedienungsanleitung
CYP
CYP EL-M31TT-4K22 Bedienungsanleitung
CYP
CYP CFSW-51MHL Bedienungsanleitung
CYP
CYP AU-D41 Bedienungsanleitung
CYP
CYP CPRO-U4H1HFS Bedienungsanleitung
CYP
CYP EL-41WX Bedienungsanleitung
CYP
CYP EL-21SY Bedienungsanleitung
