Cypress CY4541 EZ-PD CCG4 Evaluation Kit Bedienungsanleitung

CY4541 EZ-PD

CCG4 EVK

QUICK START GUIDE

STEP

Unpack the kit contents

Note: Color of the solder mask used on CCG EVK base boards and CY4541 CCG4 daughter card

may vary from the image shown in step1.

Jumper Wire

USB 2.0 Type-A

to Mini-B Cable

USB 3.0 EMCA Type-C Cable

USB 3.0 Type-A

to Type-B Cables

24V DC Power Adapter

Screwdriver

USB Type-C to

Type-A Adapters

Verify that the user LED jumper (J11) is populated on CCG EVK base board 1 (connected to Port 1of

CCG4 daughter card) and that the voltage selection jumper (J5) on the CCG4 daughter card is set to

3.3 V (position 1-2). Ensure that the wires are connected with correct polarity between the power

provider header (J12) of both the CCG EVK base boards as shown in the gure in step2. Connect the

DC power adapter (provided with the kit) to the DC power jack (J1) of either of the CCG EVK base

boards.Verify that the setup is as shown in the gure in step2. Plug the other end of the DC power

adapter to the AC power socket. LED1 (Green) on the CCG4 daughter card and on both the CCG EVK

base boards glow to indicate that the kit is powered. In addition, the LED2 (Orange) on the CCG EVK

base board 1 blinks continuously to indicate that CCG4 is powered and active.

J11

LED1

(on CCG4

Daughter Card)

Port 1

J12

Red color wire to the

+ve terminal

LED1 (on CCG

EVK Base Board 1)

LED2 (on CCG

EVK Base Board 1)

LED1(on CCG EVK Base Board 2)

CCG

EVK Base Board 1

CCG EVK Base Board 2

CY4541 CCG4

Daughter Card J12

Red color wire to the

+ve terminal

DC Power Adapter

Connected to CCG

EVK Base Board 1 Note: Ensure that CCG4 daughter

card is rmly connected to the

CCG EVK base boards.

CCG EVK

Base Board

CCG EVK

Base Board

CY4541 CCG4

Daughter Card

USB 3.0 Type-A to Type-B

cable connected to CCG

EVK Base Board 2

USB 3.0 enabled notebook or PC is recommended

USBUSB

J3 J3

USB 3.0 Type-A

to Type-B cable

connected to

CCG EVK

Base Board 1

CY4541 EZ-PD

CCG4 EVK

QUICK START GUIDE

STEP

Connect each USB 3.0 Type-A to Type-B cable from the PC to the USB Type-B port (J2) of each

of the CCG EVK base boards. Connect each USB Type-C to Type-A adapter to the USB Type-C

port (J3) of each of the CCG EVK base boards. Plug USB pendrives (not provided with the kit)

into both the USB Type-C to Type-A adapters. Verify that the setup is as shown in the gure in

step3. Observe the enumeration of both the USB pendrives on the PC. Initiate data transfer between

the two USB pendrives, and observe the data transfer speed*. This step demonstrates the capability

of CCG4 to control two USB Type-C interfaces simultaneously.

STEP

Refer to the CY4541 Kit guide** for a detailed explanation of the Dual Role Port (DRP) and

Type-C to Display Port demo using CCG4.

**Download and install the CY4541 CCG4 EVK complete setup from www.cypress.com/CY4541

to access the kit design les and documentation. After the installation, CY4541 Kit Guide.pdf

will be available at C:\Program Files (x86)\Cypress\CY4541 CCG4 EVK\1.0\Documentation\

CY4541 Kit Guide.pdf (on 64-bit Windows operating systems)

C:\Program Files\Cypress\CY4541 CCG4 EVK\1.0\Documentation\CY4541 Kit Guide.pdf

(on 32-bit Windows operating systems)

Note that any USB device can be used instead of a pendrive with the setup shown in step3.

* Data transfer speed depends on the type of the USB port (SuperSpeed or High Speed) of the PC,

the pendrive (SuperSpeed or High Speed) and the system conguration.

All trademarks or registered trademarks referenced herein are the properties of their respective owners.

002-10266 Rev.*E

USB Pen-drive

USB Type-C to

Type-A Adapter

USB Type-C to

Type-A Adapter

Andere Handbücher für CY4541 EZ-PD CCG4 Evaluation Kit

Andere Cypress Computerhardware Handbücher

Cypress

Cypress CY8CKIT-029 PSoC Bedienungsanleitung

Cypress

Cypress EZ-Color CY3263-ColorLock Bedienungsanleitung

Cypress

Cypress CYSMART CY5677 Bedienungsanleitung

Cypress

Cypress FM33256B Bedienungsanleitung

Cypress

Cypress MB9B160R Series Bedienungsanleitung

Cypress

Cypress CY8CKIT-036 Bedienungsanleitung

Cypress

Cypress CY62157EV18 Bedienungsanleitung

Cypress

Cypress CY8CPROTO-062S3-4343W Bedienungsanleitung

Cypress

Cypress CY62137FV30 Bedienungsanleitung

Cypress

Cypress CY3250-PLC20NQ Bedienungsanleitung

Cypress

Cypress AutoStore STK17T88 Montage- und Bedienungsanleitung

Cypress

Cypress CY8CKIT-031 Bedienungsanleitung

Cypress

Cypress CYUSB3ACC-004A Bedienungsanleitung

Cypress

Cypress CY14B108K Bedienungsanleitung

Cypress

Cypress MB2198-01 Bedienungsanleitung

Cypress

Cypress PSoC CY8CKIT-048 Handbuch

Cypress

Cypress 256K (32K x 8) CY62256 Bedienungsanleitung

Cypress

Cypress CY62158EV30 Bedienungsanleitung

Cypress

Cypress AutoStore STK17TA8 Bedienungsanleitung

Cypress

Cypress CY62136VN Bedienungsanleitung

Cypress

Cypress CY14E102L Bedienungsanleitung

Cypress

Cypress CY62128B Bedienungsanleitung

Cypress

Cypress EZ-PD CCG3 Bedienungsanleitung

Cypress

Cypress PSoC CY8CPROTO-063-BLE Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung