Cypress S6E2DH series Bedienungsanleitung
www.infineon.com
Please note that Cypress is an Infineon Technologies Company.
The document following this cover page is marked as “Cypress” document as this is the
company that originally developed the product. Please note that Infineon will continue
to oer the product to new and existing customers as part of the Infineon product
portfolio.
Continuity of document content
The fact that Infineon oers the following product as part of the Infineon product
portfolio does not lead to any changes to this document. Future revisions will occur
when appropriate, and any changes will be set out on the document history page.
Continuity of ordering part numbers
Infineon continues to support existing part numbers. Please continue to use the
ordering part numbers listed in the datasheet for ordering.
www.cypress.com Document No. 002-04388 Rev. *B 1
AN204388
Getting Started For FM4S6E2DH (GAT-D)
Associated Part Family: S6E2DH Series
The purpose of this guide is to provide a brief introduction of the graphics resolution of S6E2DH designated by
Cypress.
Contents
1Preface.....................................................................1
1.1 About This Guide.............................................1
2Overview ..................................................................1
3Utilization of GAT-D Tool Step by Step ....................2
3.1 Create a New Project.......................................3
3.2 Import Images..................................................4
3.3 Page Creation..................................................6
3.4 Flow Design Table Creation...........................17
3.5 Source Generation.........................................21
3.6 Add Generated Source to IAR project ...........22
3.7 Download and Run after Build.......................24
4Application of GAT-D..............................................26
4.1 Event Management........................................26
4.2 User’s Source Code.......................................27
4.3 Display Simulation .........................................29
4.4 Sprite Special Effect ......................................30
4.5 Touch Panel Resolution.................................31
4.6 Source Generate Option................................32
5GAT-D API .............................................................34
5.1 Interface Description......................................35
5.2 Join with Source ............................................37
6Program..................................................................38
6.1 Debugging Mode ...........................................38
6.2 Product Mode ................................................39
7Sample Project Instruction......................................39
7.1 Construction ..................................................39
7.2 Function Overview.........................................41
Document History............................................................42
1 Preface
1.1 About This Guide
The purpose of this guide is to provide a brief introduction of the graphics resolution of S6E2DH designated by
Cypress. This guide explains:
1. How to work with Graphics Authoring Tool for S6E2DH (GAT-D).
2. Advanced application of GAT-D.
3. How to integrate the generated source and Graphics Driver to embedded software.
4. Program to internal Flash and external Flash.
5. Construction of sample.
Note: This guide is described with example while using EWARM of IAR Systems AB. For other IDE please refer it
properly.
2 Overview
Follow figure shows the exact relationship of each component.
Getting Started for FM4 S6E2DH (GAT-D)
www.cypress.com Document No. 002-04388 Rev. *B 2
Figure 1. Overview
GAT-D Tool and GAT-D API Library could be found in S6E2DH-Graphics resolution-Ver1.0.zip.
GAT-D Tool: S6E2DH-Graphics resolution-Ver1.0\01. GAT-D Tool\01. Installer\GAT-D_xxx.exe
GAT-D API Library: S6E2DH-Graphics resolution-Ver1.0\02. GAT-D API Library\01. IAR\01. bin\GAT-D API.a
Graphics Driver: In the package of S6E2D-2DGraphicsDriver-v1.00.798-IAR.zip
S6E2D-2DGraphicsDriver-v1.00.798-IAR \01_bin\arm_none_iar\release\basic_graphics.a
S6E2D-2DGraphicsDriver-v1.00.798-IAR \01_bin\arm_none_iar\release\util.a
3 Utilization of GAT-D Tool Step by Step
The follow steps explain how to use GAT-D Tool to arrange a video (a series of frame) to display on S6E2DH Series
based LCD device.
1. Create a new project
2. Import images
3. Page creation
4. Flow Design Table creation
5. Source generation
6. Add generated source to IAR project
7. Download and run after build
Also assumed conditions:
1. GAT-D Tool installed
2. IAR Embedded Workbench installed (ver.7.10 or upper)
3. Image material prepared
4. A S6E2DH series based LCD device and ICE (I-Jet recommend) prepared
PC
environment
GAT-D
Tool
Images
.Bmp
.Jpeg
.Png
.Gif
.etc. I
m
a
g
e
s
.
B
m
p
.
J
p
e
g
.
P
n
g
.
G
i
f
.
e
t
c
.
Project creation
Image convert
Display configuration
Display simulation
Source generation
IAR EW
IDE
Generated source
GAT-D API.a
.a
GAT-D API
Library
Graphics
Driver
basic_graphics.a
util.a
Other function source
User
edited
Flash image
(.Mhx)
Embedded
device
External flash
Program
S6E2DH internal
flash
Build/Program
Getting Started for FM4 S6E2DH (GAT-D)
www.cypress.com Document No. 002-04388 Rev. *B 3
3.1 Create a New Project
Step1: Open GAT-D Tool, the tool will open as follow.
Figure 2. Opened GAT-D Tool Window
Step2: Click “Project” menu and click “new” as follows
Figure 3. New Project Menu
Step3: Input the name and select LCD Size.
Getting Started for FM4 S6E2DH (GAT-D)
www.cypress.com Document No. 002-04388 Rev. *B 4
Figure 4. New Project Step 1 of 2
Step4: Click “Next” and then click “Finish” a new project will create as follow.
Figure 5. New Project
3.2 Import Images
Step1: Click “Image Library”
Getting Started for FM4 S6E2DH (GAT-D)
www.cypress.com Document No. 002-04388 Rev. *B 5
Figure 6. Image Library Tab
Step2: Right click “Stencil” in “Image Library”, and Click “Add New Image” in the menu.
Figure 7. Add New Image Menu
Step3: Go to the path and select images, image will list as follow.
Note: Image’s file type support bmp, png, jpeg, gif, psd.
Figure 8. Added Image List
Getting Started for FM4 S6E2DH (GAT-D)
www.cypress.com Document No. 002-04388 Rev. *B 6
3.3 Page Creation
3.3.1 Create a new Page
Step1: Right click “Page” folder, and click “New Page” in the menu.
Figure 9. New Page Menu
Then a new page is created as follow.
Figure 10. Created New Page
Getting Started for FM4 S6E2DH (GAT-D)
www.cypress.com Document No. 002-04388 Rev. *B 7
3.3.2 Page Configuration
Step1: Right Click “Page1” and click “Properties…” in menu
Figure 11. Page Property Menu
Step2: Check “Enable”, the background color of page could be changed.
Select RGB Color, if there is nothing on the page, LCD will display background color.
Figure 12. Page Property Window
Getting Started for FM4 S6E2DH (GAT-D)
www.cypress.com Document No. 002-04388 Rev. *B 8
3.3.3 Add Window to Page
Step1: Select window from drawn tool bar, left click to work area, window is added as follow.
If want to add several window to a layer, you have to set the layer option to multi-window layer, otherwise could only
add one window to a layer
Figure 13. Add Window
Step2: Double click window in work area, window configuration window will displays. Configure them.
Figure 14. Window Property
Getting Started for FM4 S6E2DH (GAT-D)
www.cypress.com Document No. 002-04388 Rev. *B 9
If want add several image to one window, you have to check “Blend Operator”
Figure 3-14 shows difference of image in windows that are set to “Blend Operator” or not
Figure 15. Blend Operator
The setting of “Alpha-blending”, will effects blend result of image on the window with background.
Figure 16. Window Alpha Blend Illustrations
Illustrations A:
External
Flash
Image in
window set to
“Blend
Operator”
Image in window
not set to “Blend
Operator”
S6E2DH
MCU
GDC Blend
Engine
VRAM
GDC Display
Engine
LC
D
Andere Handbücher für S6E2DH series
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Cypress Computerhardware Handbücher
Cypress
Cypress CY14B108L Bedienungsanleitung
Cypress
Cypress CY14B101L Bedienungsanleitung
Cypress
Cypress CY62128EV30 Bedienungsanleitung
Cypress
Cypress CapSense CY3280-SmartSense Handbuch
Cypress
Cypress CY8CKIT-038 Bedienungsanleitung
Cypress
Cypress CY8CKIT-017 Bedienungsanleitung
Cypress
Cypress MB2198-01 Bedienungsanleitung
Cypress
Cypress CapSense CY8C20396 Bedienungsanleitung
Cypress
Cypress CY3641 Bedienungsanleitung
Cypress
Cypress CY8CPROTO-062S3-4343W Bedienungsanleitung
Cypress
Cypress CY8CKIT-029 PSoC Bedienungsanleitung
Cypress
Cypress AutoStore STK17T88 Montage- und Bedienungsanleitung
Cypress
Cypress MB2100-01A-E Bedienungsanleitung
Cypress
Cypress 7C185-15 Bedienungsanleitung
Cypress
Cypress CY8CPROTO-062-4343W Bedienungsanleitung
Cypress
Cypress DCT-7 Installationshandbuch
Cypress
Cypress UNIVERSAL CAPSENSE CY3280-BMM Bedienungsanleitung
Cypress
Cypress EZ-USB FX3 SDK Bedienungsanleitung
Cypress
Cypress CY14B104L Bedienungsanleitung
Cypress
Cypress 001-07160 Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
