Cypress CY8CKIT-030 Bedienungsanleitung

CY8CKIT-030

PSoC®3 Development Kit Guide

Doc. # 001-61038 Rev. *J

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

Phone (USA): 800.858.1810

Phone (Intnl): 408.943.2600

http://www.cypress.com

Downloaded from Arrow.com.

Copyrights

CY8CKIT-030 PSoC® 3 Development Kit Guide, Doc. # 001-61038 Rev. *J 2

Copyrights

Corporation and its subsidiaries, including Spansion LLC ("Cypress"). This document, including any software or

firmware included or referenced in this document ("Software"), is owned by Cypress under the intellectual prop-

erty laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under

such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its

patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a

license agreement and you do not otherwise have a written agreement with Cypress governing the use of the

Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license (without the right

to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to

modify and reproduce the Software solely for use with Cypress hardware products, only internally within your

organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indi-

rectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those

claims of Cypress's patents that are infringed by the Software (as provided by Cypress, unmodified) to make,

use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, repro-

duction, modification, translation, or compilation of the Software is prohibited.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING

HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. To the extent permitted by applicable law, Cypress reserves

the right to make changes to this document without further notice. Cypress does not assume any liability arising

out of the application or use of any product or circuit described in this document. Any information provided in

this document, including any sample design information or programming code, is provided only for reference

purposes. It is the responsibility of the user of this document to properly design, program, and test the function-

ality and safety of any application made of this information and any resulting product. Cypress products are not

designed, intended, or authorized for use as critical components in systems designed or intended for the opera-

tion of weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices

or systems (including resuscitation equipment and surgical implants), pollution control or hazardous substances

management, or other uses where the failure of the device or system could cause personal injury, death, or

property damage ("Unintended Uses"). A critical component is any component of a device or system whose fail-

ure to perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or

effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any

claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall

indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, includ-

ing claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products.

Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, PSoC, CapSense, EZ-

USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other

countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be

claimed as property of their respective owners.

Downloaded from Arrow.com.Downloaded from Arrow.com.

CY8CKIT-030 PSoC® 3 Development Kit Guide, Doc. # 001-61038 Rev. *J 3

Contents

1. Introduction 5

1.1 Kit Contents.................................................................................................................5

1.2 PSoC Creator ..............................................................................................................5

1.3 Additional Learning Resources....................................................................................6

1.3.1 Beginner Resources.........................................................................................6

1.3.2 Engineers Looking for More.............................................................................6

1.3.3 Learning from Peers.........................................................................................6

1.3.4 More Code Examples.......................................................................................6

1.4 Documentation Conventions........................................................................................8

2. Getting Started 9

2.1 DVD Installation...........................................................................................................9

2.2 Install Hardware.........................................................................................................10

2.3 Install Software ..........................................................................................................10

2.4 Uninstall Software......................................................................................................10

2.5 Verify Kit Version.......................................................................................................10

3. Kit Operation 11

3.1 Programming PSoC 3 Device....................................................................................11

4. Hardware 14

4.1 System Block Diagram ..............................................................................................14

4.2 Functional Description ...............................................................................................15

4.2.1 Power Supply.................................................................................................15

4.2.1.1 Power Supply Jumper Settings........................................................17

4.2.1.2 Grounding Scheme..........................................................................17

4.2.1.3 Low-Power Functionality..................................................................18

4.2.2 Programming Interface...................................................................................18

4.2.2.1 Onboard Programming Interface .....................................................18

4.2.2.2 JTAG/SWD Programming................................................................19

4.2.3 USB Communication......................................................................................20

4.2.4 Boost Convertor.............................................................................................21

4.2.5 32-kHz and 24-MHz Crystal...........................................................................22

4.2.6 Protection Circuit............................................................................................22

4.2.6.1 Functional Description .....................................................................23

4.2.7 PSoC 3 Development Kit Expansion Ports....................................................24

4.2.7.1 Port D...............................................................................................24

4.2.7.2 Port E...............................................................................................26

4.2.8 RS-232 Interface............................................................................................27

4.2.9 Prototyping Area ............................................................................................27

4.2.10 Character LCD...............................................................................................28

4.2.11 CapSense Sensors........................................................................................29

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

CY8CKIT-030 PSoC® 3 Development Kit Guide, Doc. # 001-61038 Rev. *J 4

Contents

5. Code Examples 30

5.1 Introduction................................................................................................................30

5.1.1 Programming the Code Examples.................................................................30

5.2 VoltageDisplay...........................................................................................................31

5.2.1 Project Description.........................................................................................31

5.2.2 Hardware Connections...................................................................................31

5.2.3 DelSig ADC Configuration..............................................................................31

5.2.4 Verify Output ..................................................................................................32

5.3 IntensityLED ..............................................................................................................33

5.3.1 Project Description.........................................................................................33

5.3.2 Hardware Connections...................................................................................33

5.3.3 Verify Output ..................................................................................................33

5.4 LowPowerDemo ........................................................................................................34

5.4.1 Project Description.........................................................................................34

5.4.2 Hardware Connections...................................................................................34

5.4.3 Verify Output ..................................................................................................34

5.5 CapSense Example...................................................................................................35

5.5.1 Project Description.........................................................................................35

5.5.2 Hardware Connections...................................................................................35

5.5.3 Verify Output ..................................................................................................35

5.6 ADC_DAC Example...................................................................................................37

5.6.1 Project Description.........................................................................................37

5.6.2 Hardware Connections...................................................................................37

5.6.3 Verify Output ..................................................................................................37

A. Appendix 38

A.1 Schematics ................................................................................................................38

A.2 Board Layout .............................................................................................................43

A.2.1 PDC-09589 Top.............................................................................................43

A.2.2 PDC-09589 Power.........................................................................................44

A.2.3 PDC-09589 Ground .......................................................................................45

A.2.4 PDC-09589 Bottom........................................................................................46

A.3 Bill of Materials (BOM)...............................................................................................47

A.4 Pin Assignment Table................................................................................................52

A.5 Using RBLEED Resistor for CapSense.....................................................................56

Revision History 57

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

CY8CKIT-030 PSoC® 3 Development Kit Guide, Doc. # 001-61038 Rev. *J 5

1. Introduction

Thank you for your interest in the CY8CKIT-030 PSoC®3 Development Kit. This kit allows you to

develop precision analog and low-power designs using PSoC 3. You can design your own projects

with PSoC Creator™ or alter the sample projects provided with this kit.

The CY8CKIT-030 PSoC 3 Development Kit is based on the PSoC 3 family of devices. PSoC 3 is a

Programmable System-on-Chip™ platform for 8-bit and 16-bit applications. It combines precision

analog and digital logic with a high-performance CPU. With PSoC, you can create the exact

combination of peripherals and integrated proprietary IP to meet your application requirements.

1.1 Kit Contents

The PSoC 3 Development Kit contains:

■Development board

■Kit DVD

■Quick start guide

■USB A to mini-B cable

■3.3-V LCD module

Inspect the contents of the kit; if you find any part missing, contact your nearest Cypress sales office

for help.

1.2 PSoC Creator

Cypress's PSoC Creator software is a state-of-the-art, easy-to-use integrated development

environment (IDE) that introduces a hardware and software design environment based on classic

schematic entry and revolutionary embedded design methodology.

With PSoC Creator, you can:

■Create and share user-defined, custom peripherals using hierarchical schematic design.

■Automatically place and route select components and integrate simple glue logic, normally

located in discrete muxes.

■Trade off hardware and software design considerations allowing you to focus on what matters

and getting to market faster.

PSoC Creator also enables you to tap into an entire tools ecosystem with integrated compiler tool

chains, RTOS solutions, and production programmers to support both PSoC 3 and PSoC 5LP.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

CY8CKIT-030 PSoC® 3 Development Kit Guide, Doc. # 001-61038 Rev. *J 6

Introduction

1.3 Additional Learning Resources

Visit http://www.cypress.com for additional learning resources in the form of datasheets, application

notes, and technical reference manual.

1.3.1 Beginner Resources

AN54181 - Getting Started with PSoC® 3

PSoC Creator Training

1.3.2 Engineers Looking for More

AN54460 - PSoC 3®, PSoC 4, and PSoC 5LP Interrupts

AN52705 - PSoC 3® and PSoC 5LP - Getting Started with DMA

AN52701 - PSoC 3® and PSoC 5LP - Getting Started with Controller Area Network (CAN)

AN54439 - PSoC 3® and PSoC 5LP External Crystal Oscillators

AN52927 - PSoC 3® and PSoC 5LP - Segment LCD Direct Drive

Cypress continually strives to provide the best support. Click here to view a growing list of

application notes for PSoC 3, PSoC 4, and PSoC 5LP.

1.3.3 Learning from Peers

Cypress Developer Community Forums

1.3.4 More Code Examples

PSoC Creator provides several example projects that make code development fast and easy. To

access these example projects, click on Find Example Project… under the Example and Kits sec-

tion in the Start Page of PSoC Creator or navigate to File > Open > Example Project….

Figure 1-1. Find Example Project

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

CY8CKIT-030 PSoC® 3 Development Kit Guide, Doc. # 001-61038 Rev. *J 7

Introduction

The Find Example Project section has various filters that help you locate the most relevant project.

PSoC Creator provides several starter designs. These designs highlight features that are unique to

PSoC devices. They allow you to create a design with various components, instead of creating an

empty design; the code is also provided. To use a starter design for your project, navigate to File >

New > Project and select the design required.

Figure 1-2. New Project

The starter designs and the example project contain a PDF within the project that explains the fea-

tures of the project and its configuration.

Figure 1-3. Project PDF Location

The example projects and starter designs are designed for the CY8CKIT-001 PSoC Development

Kit. However, these projects can be converted for use with the CY8CKIT-030 PSoC 3 Development

Kit or CY8CKIT-050 PSoC 5 Development Kit by following the procedure in the knowledge base arti-

cle Migrating Project from CY8CKIT-001 to CY8CKIT-030 or CY8CKIT-050.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

CY8CKIT-030 PSoC® 3 Development Kit Guide, Doc. # 001-61038 Rev. *J 8

Introduction

1.4 Documentation Conventions

Table 1-1. Document Conventions for Guides

Convention Usage

Courier New Displays file locations, user entered text, and source code:

C:\ ...cd\icc\

Italics Displays file names and reference documentation:

Read about the sourcefile.hex file in the PSoC Designer User Guide.

[Bracketed, Bold]Displays keyboard commands in procedures:

[Enter] or [Ctrl] [C]

File > Open Represents menu paths:

File > Open > New Project

Bold Displays commands, menu paths, and icon names in procedures:

Click the File icon and then click Open.

Times New Roman Displays an equation:

2 + 2 = 4

Text in gray boxes Describes cautions or unique functionality of the product.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

CY8CKIT-030 PSoC® 3 Development Kit Guide, Doc. # 001-61038 Rev. *J 9

2. Getting Started

This chapter describes how to install and configure the PSoC 3 Development Kit. The Kit

Operation chapter on page 11 explains how to program a PSoC 3 device with PSoC Programmer

and use the kit with the help of a code example. To reprogram the PSoC device with PSoC Creator,

see the installation instructions for PSoC Creator. The Hardware chapter on page 14 details the

hardware operation. The Code Examples chapter on page 30 provides instructions to create a

simple code example. The Appendix section provides the Schematics, Board Layout, Bill of

Materials (BOM) and other useful information regarding the PSoC 3 Development Kit.

2.1 DVD Installation

Follow these steps to install the PSoC 3 Development Kit software:

1. Insert the kit DVD into the DVD drive of your PC. The DVD is designed to auto-run and the kit

menu appears.

Figure 2-1. Kit Menu

Note If auto-run does not execute, double-click cyautorun.exe on the root directory of the DVD.

CY8CKIT-030 PSoC® 3 Development Kit Guide, Doc. # 001-61038 Rev. *J 10

Getting Started

After the installation is complete, the kit contents are available at the following location:

<Install_Directory>\Cypress\PSoC 3 Development Kit\<version>

2.2 Install Hardware

No hardware installation is required for this kit.

2.3 Install Software

When installing the PSoC 3 Development Kit, the installer checks if your system has the required

software. These include PSoC Creator, PSoC Programmer, Windows Installer, .NET, and Keil Com-

plier. If these applications are not installed, the installer installs them in your PC before installing the

kit. If the Acrobat Reader application is not installed in your PC, then the installer provides the link to

install the same; this does not prevent kit installation. Note that Acrobat Reader is required to view

the kit documents. Install the following software from the kit DVD:

■PSoC Creator 3.0 or later

■PSoC Programmer 3.19.1 or later

Note When installing PSoC Programmer, select Typical on the Installation Type page.

■Code examples (provided in the Firmware folder)

Important for Win7 and Vista Users: Rename the _tools.ini file in <Install_Directory>:\

PSoC Creator\<version>\PSoC Creator\import\keil\pk51\<version> to tools.ini for

the Keil registration to be successful.

2.4 Uninstall Software

The software can be uninstalled using one of the following methods:

■Go to Start > Control Panel > Programs > Uninstall a program; select the Uninstall button in

Windows 7.

■Go to Start > All Programs > Cypress > Cypress Update Manager > Cypress Update Man-

ager; select the Uninstall button next to the software to be uninstalled.

■Insert the installation DVD and click Install PSoC 3 Development Kit button. In the CyInstaller

for PSoC 3 Development Kit 1.0 window, select Remove from the Installation Type drop-down

menu. Follow the instructions to uninstall.

2.5 Verify Kit Version

To know the kit revision, look for the white sticker on the bottom left, on the reverse of the kit box. If

the revision reads CY8CKIT-030A, then, you own the latest version.

To upgrade CY8CKIT-030 to CY8CKIT-030A, you can purchase our latest kits at:

http://www.cypress.com/go/CY8CKIT-030

Andere Handbücher für CY8CKIT-030

Inhaltsverzeichnis

Andere Cypress Mikrocontroller Handbücher

Cypress

Cypress CY8CKIT-016 Bedienungsanleitung

Cypress

Cypress EZ-USB FX3 CYUSB3KIT-001 Bedienungsanleitung

Cypress

Cypress PSoC 4 CY8CKIT-049-4 Series Bedienungsanleitung

Cypress

Cypress PSoC 4 M Series Bedienungsanleitung

Cypress

Cypress PSoC CY8CKIT-062-WiFi-BT Bedienungsanleitung

Cypress

Cypress UNIVERSAL CAPSENS CY3280-BBM Bedienungsanleitung

Cypress

Cypress CY8CKIT-062-BLE Bedienungsanleitung

Cypress

Cypress CYALKIT-E03 Handbuch

Cypress

Cypress PSoC 4200DS Prototyping Kit Bedienungsanleitung

Cypress

Cypress EZ-PD CY4502 Bedienungsanleitung

Cypress

Cypress CY8CKIT-040 PSoC 4000 Pioneer Kit Bedienungsanleitung

Cypress

Cypress PSoC 3 Bedienungsanleitung

Cypress

Cypress CY14NVSRAMKIT-001 Bedienungsanleitung

Cypress

Cypress CY8CKIT-059 PSoC 5LP Prototyping Kit Bedienungsanleitung

Cypress

Cypress CY3633 Bedienungsanleitung

Cypress

Cypress CY8CKIT-046 Bedienungsanleitung

Cypress

Cypress PSoC CY8CKIT-048 Bedienungsanleitung

Cypress

Cypress CY8CKIT-041-41XX Bedienungsanleitung

Cypress

Cypress PSoC 5 CY8CKIT-050A Bedienungsanleitung

Cypress

Cypress FM0+ S6E1C-Series Bedienungsanleitung

Cypress

Cypress CY4531 EZ-PD CCG3 EVK Bedienungsanleitung

Cypress

Cypress WirelessUSB N:1 DVK Bedienungsanleitung

Cypress

Cypress FM4 Series Bedienungsanleitung

Cypress

Cypress PSoC CapSense Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung