Cypress CA-USBHUT Bedienungsanleitung
CA-USBHUT &
CA-USBHU100R
Multi-functioning HDMI/USB/RS-
232 & IR over single CAT5e/6
Transmitter and Receiver
Extender Box
Operation Manual
CA-USBHUT & CA-USBHU100R
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20100701 Preliminary Release
Table of Contents
1
1
1
2
2
3
4
4
4
5
6
7
8
1. Introduction ……………………..……………………...…........….…….
2. Applications …………………..………………….……...................…..
3. Package Contents ………………………...........……….................…
4. System Requirements ……………..……….........………............…….
5. Features …………………………………………......……........…...……
6. Specications ………………………………...……..........………....….
7. Operation Controls and Functions ……………...……..............……
7.1 Transmitter’s Front Panel ........................................................
7.2 Transmitter’s Rear Panel .……………………..….......…...….…
7.3 Receiver’s Front Panel ............................................................
7.4 Receiver’s Rear Panel .………………...…..…….......…...….…
8. Connection and Installation ….………………….........…..…..…......
9. Acronyms …......................................................................................
1. Introduction
With HDMI & USB over CAT5e/6 connectivity are becoming popular
nowadays. The growing need for their flexibility has likewise risen in demand.
The HDMI & USB over a CAT5e/6 transmitter and receiver box solution is
developed for any household and/or commercial environment. This pair of
devices allows HDMI and or USB host device to send data within a 100-meters
distance while offering expandability for up to 4 USB outputs to perform
tasks. In addition, this pair of devices can also save data from the output
port devices or allow remote control through the display side even when
there's 100 meters apart separating the devices. Furthermore, this pair of
devices includes extra functions like IR, line-out and microphone features that
allows user to enjoy control over distance and audio sound over favor audio
equipments. Moreover, the device allowing user with cascade with the same
family type of device to extend the transmission distance up to as long as it
demand and without signal loss or delay, or with multi pairs of the extender
box up to 16 for matrix usage from a IP for data sharing within the connected
device of sources and displays. The HDMI & USB over a CAT5e/6 transmitter
and receiver box are the ideal choices to your HDMI & USB extension and
data sharing needs.
2. Applications
HDMI, DVI, RS-232, IR&USB Extender
Broadcasting system over single CAT5e/6
Multimedia display and multi-data sharing
Long distance data sending with cascade
Matrix network system
System control over RS-232 and equipment control over IR
KVM control
3. Package Contents
HDMI & USB over single CAT5e/6 Transmitter
HDMI & USB over single CAT5e/6 Receiver
5V / 2.6ADC power supply x 2
Operation manual
1
4. System Requirements
Input HDMI and or USB source equipment such as DVD, Blue-Ray player
and or PC/Notebook with connection cables.
Output display such as HD TV, monitor and or PC/Notebook, active
speaker, amplifier and connection cables.
CAT5e/6 cable up to 100Ms in between of transmitter and receiver.
5. Features
HDMI v1.3, HDCP v1.1 and DVI v1.0 compliant
Support USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
Operate with USB 2.0 high speed host controllers and USB 1.1 classic hosts
True plug and play without any driver installation required
Display and control of the host device and source equipment
Save and share data into a separate room
Tested CAT5 cable distance of up to 100 meters or cascade up to as
long it require or link up to 16 pairs for matrix system
Supports digital display output resolution up to 1920 x 1080@60Hz
Adopt visually lossless video compression algorithm
Automatic display mode detection and DDC synchronization
Support Over-LAN (TCP/IP)
Simple set up with easy to use
LED indicators for easy viewing
Total transmission frequency 1G Hz
2
6. Specications
Transmitter
Input Port 1 x USB (B type)
1 x HDMI
1 x IR Blaster
1 x RS-232
Output Port 1 x RJ45
Receiver
Input Port 1 x RJ45
Output Ports 4 x USB (A type)
1 x HDMI
1 x RS-232
1 x IR Receiver
1 x 3.5Ø Phone Jack
1 x 3.5Ø Microphone
ESD Protection Human body model: ± 10kV (air-gap discharge)
± 6kV (contact discharge)
Power Supply 5V / 2.6A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 102 (W) x 95 (D) x 25 (H)
Weight(g) 214 / Transmitter, 220 / Receiver
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F
Power Consumption 5W / Transmitter, 12W / Receiver
Relative Humidity 20~90% RH (non condensing)
3
7. Operation Controls and Functions
7.1 Transmitter’s Front Panel
① ② ③
LINK
POWER
HDMI/USB/IR/RS232 to CAT5e/6 Transmitter
LINK PAIR
SELECT
① Power LED: The red LED will illuminate when the device is connected with
power.
② Link LED: The LED red will illuminate when the device has received input
source single and output display’s data.
③ LINK PAIR SELECT: This dip switch allows user with matrix setting for link up
to 16 pairs of the devices with single IP router. Each pair must have
the same dip switch setting in order to pair to the right device setting. The
factory default setting is at 0000.
7.2 Transmitter’s Rear Panel
① ② ⑥⑤④③
USB INDC 5V CAT5e/6 OUT
HDMI IN
RS 232 IN
IR
BLASTER
① DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to AC wall outlet. Power LED will illuminate when the power is on.
② USB IN: This slot is to connect with PC/Notebook for input source signal
with connection cable.
③ CAT5e/6 OUT: This slot is to connect with CAT5e/6 cable with receiver
side’s CAT5e/6 input.
④ HDMI IN: This slot is to connect with input source such as DVD or Blue-Ray
player with connection cable.
⑤ RS 232 IN: This slot is to connect with D-Sub 9pin from PC’s system for
controlling both the input source and output display over RS-232.
⑥ IR BLASTER: This slot is to connect with IR blaster cable included in the
package for IR signal sending and controlling the HDMI input source
equipment.
4
7.3 Receiver’s Front Panel
① ② ③ ⑤④ ⑥
POWER
LINK
USB
1 2 3 4
CAT5e/6 to HDMI/USB/IR/RS232 Receiver
VIDEO
MODE
IR
① Power LED: The red LED will illuminate when the device is connected with
power.
② Link LED: The LED red will illuminate when the device has received output
display’s single and input source’s data.
③ IR:
④ LINK PAIR SELECT: This dip switch allows user with matrix setting for link up
to 16 pairs of the devices with single IP router. Each pair must have
the same dip switch setting in order to pair to the right device setting. The
factory default setting is at 0000.
⑤ VIDEO MODE: Press this button to switch in between the video and
graphic mode. The OSD will display your selection every time when the
button is pressed.
⑥ USB 1~4: These slots are for users to connect with keyboard, mouse, HDD,
USB flash drive and…etc. for USB hub function and KVM usage.
5
7.4 Receiver’s Rear Panel
① ② ⑥⑤④③
DC 5V CAT5e/6 IN
RS 232 OUT
AUDIO
IN OUT
HDMI OUT
① DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to AC wall outlet. Power LED will illuminate when the power is on.
② RS 232 OUT: This slot is to connect with D-Sub 9pin cable from PC’s system
for controlling both the input source and output display over RS-232.
③ CAT5e/6 IN: This slot is to connect with CAT5e/6 cable with transmitter
side’s CAT5e/6 output
④ AUDIO IN: This slot is for extra audio input source signal to be connected
with 3.5Ø phone jack cable.
⑤ AUDIO OUT: This slot is for external audio output equipment to be
connected with active speaker and connection cable.
⑥ HDMI OUT: This slot is to connect with output display such as HD TV or
monitor with connection cable.
6
8. Connection and Installation
Blu-ray
DVD
NotebookNotebook
HDMI
HDMI
HDMI
HDMI
PC or
or
or
100m
100m
B
B
IP Router
TV/MonitorMicrophone Active
Speaker
HDMI
HDMI
HDMI
HDMI
30°
30°
3M 3M
7M
Keybord Mouse HDD Flash
100m
7
Andere Handbücher für CA-USBHUT
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Cypress Empfänger Handbücher
Cypress
Cypress CAC-TXA Bedienungsanleitung
Cypress
Cypress CHDBR-2HE Bedienungsanleitung
Cypress
Cypress CA-COMP50R Bedienungsanleitung
Cypress
Cypress CH-515RXPT Bedienungsanleitung
Cypress
Cypress MB2146-07-E Bedienungsanleitung
Cypress
Cypress CA-DVI250R Bedienungsanleitung
Cypress
Cypress COH-Tx1 Bedienungsanleitung
Cypress
Cypress MB2146-07-E Bedienungsanleitung
Cypress
Cypress CA-DVI100R Bedienungsanleitung
Cypress
Cypress CWHDI-TX Bedienungsanleitung
Cypress
Cypress COH-Tx Bedienungsanleitung
Cypress
Cypress CHDBR-2HE Bedienungsanleitung
Cypress
Cypress CH-106TX Bedienungsanleitung
Cypress
Cypress CWHDI-TX Bedienungsanleitung
Cypress
Cypress CA-COMPAT Bedienungsanleitung
Cypress
Cypress VEX-X1102R-B0C Bedienungsanleitung
Cypress
Cypress CA-HDMI150R Bedienungsanleitung
Cypress
Cypress CE217646 Bedienungsanleitung
Cypress
Cypress CA-HDMI250R Bedienungsanleitung
Cypress
Cypress CA-DVIAT Bedienungsanleitung
