D-Link DG-104SH Bedienungsanleitung

Manual

Building Networks for People

D-Link DG-104SH

VoIP Station Gateway

Version 1.10

Contents

PackageContents ................................................................................3

Introduction............................................................................................4

Features andBenefits ...........................................................................5

GettingStarted ......................................................................................6

UnderstandingIndicators.......................................................................9

Configuration ......................................................................................11

Usingthe BootMenu ...........................................................................21

UsingWeb-Based Management .........................................................30

CommandLineInterface .....................................................................68

TechnicalSpecifications ......................................................................76

Waranty...............................................................................................79

Registration ........................................................................................82

ContactingTechnical Support ..............................................................83

Package Contents



Internet Explorer Version 6.0 or Netscape Navigator

Version6.0andAbove

Computers with Windows, Macintosh, or Linux-based

operating systems with an installed Ethernet adapter

System Requirements:

Contents of Package:

D-Link DG-104SH VoIP Station Gateway

Ethernet Cable (RJ-45)

A/C PowerAdapter

If any of the above items are missing, please contact your reseller.



Introduction

TheD-LinkDG-104SHVoIPStationGatewaylinkstraditionaltelephonynetworks

to IP networks with conventional telephony devices such as analog phones or

fax machines. The DG-104SH includes four loop start Foreign Exchange

Subscriber (FXS) interfaces with normal RJ-11 telephone connectors that

provide voice/fax communication over the IP network, and it also provides two

10/100MbpsFast Ethernet ports. OneEthernetportis for a DSL/CableModem

or other WAN devices and the other may function as a connection to create a

home or small office LAN network. Enabling NAT on the DG-104SH will allow

multiple clients to connect to the Internet. It can be configured/monitored via

theConsole, Webbrowser,orTelnetandSNMPmanagement isalsosupported.

By routing calls over the Internet or any IP network, this gateway can reduce or

eliminate long distance or inter-office phone charges. Corporations can also

enjoy the benefits of network consolidation and the reduction of leased lines by

relying on the Internet service providers to deliver toll-quality voice

communications over the IP networks.

Features and Benefits

Designedforversatility andperformance,the DG-104SHVoIPGatewayprovides

the following features:



One 10/100 Fast Ethernet LAN port for connecting to a local network



One 10/100 Fast Ethernet WAN port for connecting to a WAN device

Four analog loop-start FXS interfaces using female RJ-11 connectors

IP address assignment using DHCP (Dynamic Host Configuration

Protocol) or static configuration

Silence suppression to reduce bandwidth consumption

Comfort noise generation for a more natural feel

Adaptive jitter buffer for smooth voice reception

Lost packet recovery ability for improved voice quality

Command port for easy configuration

Remote Software download/update

Support IP sharing to allow multiple users to access the Internet

via a single IP address

CallerID

QoS support to ensure voice quality



Built-in PPPoE function to support dial-up connection for broadband

technology



Getting Started

Identifying External Components

LED Indicator Panel: Refer to the next section titled, “Understanding

Indicators,”fordetailedinformation abouteach oftheVoIPGateway’sLED

indicators.



Front Panel

Rear Panel

AC Power Connector: For the included power adapter. If you use a

power adapter other than the one included with the product, please make

sure that it has a DC output of 12VDC/1A.

Diagnostic Port: An RS-232 serial port used to configure the device.

Plug one end of a straight-through wired RS-232 cable to the device and

the other end to a serial port of a PC running a terminal emulation pro-

gram (such as Microsoft HyperTerminal) or a VT-100 terminal.



DG-104SH

Getting Started

Identifying External Components

Fast Ethernet WAN: A 10/100 dual-speed Ethernet port fitted with an

RJ-45 connector used to connect the VoIP gateway to a WAN device

(usually a router). This port accepts Category 3, 4 or 5 UTP cabling with

an RJ-45 connector.

Fast Ethernet LAN: A10/100 dual-speed Ethernet port fittedwithan RJ-

45 connector used to connect the VoIP gateway to a LAN device (hub,

switch, PC, etc.). This port accepts Category 5 or better UTP cabling

with an RJ-45 connector.

Phone 1 to 4: Normal RJ-11 phone jacks used to connect analog (or

digital) telephones and fax machines. Plug your telephone(s) and/or fax

machine directly into any of these jacks.



Installation

When choosing a place to install the VoIP Gateway, please Use the following

guidelines:

The power outlet should be within 1.82 meters (6 feet) of the device.

Visually inspect the power cord and see that it is secured to the AC

power connector.

Donotplace heavy objects on theDG-104SHat any time. Placingthe

DG-104SH in a well ventilated area is very important. Not doing so

may cause damage to the unit.

When installing the unit on a desktop or shelf, the rubber feet in-

cluded with the device should be attached. These cushioning feet

should be attached to the bottom corners of the device.



Getting Started

Connecting the Network Cable

Category 3, 4, or 5 UTP cable can be used to make an Ethernet connection to

your router.

Connecting the VoIP Gateway to a Hub/Switch

Connecting the VoIP Gateway to a Computer

The DG-104SH requires a straight-through cable when connecting to a

computer. Make sure that your IP address on your Ethernet card is in the same

subnet as the DG-104SH, otherwise it will not connect.

When connecting the LAN port to a Hub/Switch you will need to use a cross-

overcable.

Installation

Understanding Indicators

Before configuring your VoIP Gateway, take a few minutes to look over this

section and familiarize yourself with the front panel LED indicators depicted

below.

Power: This LED is lit when the device is receiving power; otherwise, it

is unlit.

WAN: This LED displays the connection speed, link status, and activity

on the 10/100 dual-speed Ethernet port that is used to connect to your

WAN device (usually a DSL/cable modem).

10/100M: This indicator remains unlit when there is no connection, or

the port is operating at 10Mbps through a connection to a 10BASE-T

device. It is lit when the port is operating at 100Mbps through a con-

nection to a dual-speed or 100BASE-TX Fast Ethernet device.

Link/Act: When a good link to a powered-up, but idle device is de-

tected on a port, this indicator shines steadily. When packets are re-

ceived from the device, the indicator blinks.



Test: This LED will flash quickly when the DG-104SH is either perform-

ing a self test or booting up. The LED will remain lit when the system is

ready for a connection with the Gatekeeper. It will remain dark when the

system is ready but can not receive an acknowledgement from the

Gatekeeper.

Line: Lights when PSTN line is in use.

Phone 1 to 4: Lights when standard phone port is in use.

Note: If a powered-up device is connected to a port and the port’s Link/Act status

indicator is unlit, the most probable cause is a cabling or connection problem

(for example, wrong cable type or bad contact) or a device malfunction.

LAN: ThisLEDdisplaysthe connection speed, link status, and activity on

the 10/100 dual-speed Ethernet port that is used to connect to your LAN.

10/100M: This indicator remains unlit when there is no connection, or

the port is operating at 10Mbps through a connection to a 10BASE-T

device. It is lit when the port is operating at 100Mbps through a con-

nection to a dual-speed or 100BASE-TX Fast Ethernet device.

Link/Act: When a good link to a powered-up but idle device is de-

tected on a port, this indicator shines steadily. When packets are re-

ceived from the device, the indicator blinks off and on.

Understanding Indicators



Andere Handbücher für DG-104SH

Inhaltsverzeichnis

Andere D-Link Tor Handbücher

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link Airspot DSA-3100 Bedienungsanleitung

D-Link

D-Link DIV-140 Bedienungsanleitung

D-Link

D-Link AirSpot DSA-3200 Bedienungsanleitung

D-Link

D-Link DVG-4032S Bedienungsanleitung

D-Link

D-Link DI-704 Bedienungsanleitung

D-Link

D-Link DVG-2032S Bedienungsanleitung

D-Link

D-Link DVG-3016S Bedienungsanleitung

D-Link

D-Link DSA-3600 Bedienungsanleitung

D-Link

D-Link DSA-3600 Bedienungsanleitung

D-Link

D-Link DG-104S Bedienungsanleitung

D-Link

D-Link DVG-6004S Bedienungsanleitung

D-Link

D-Link DVG?6001G Bedienungsanleitung

D-Link

D-Link DVG?6008G Bedienungsanleitung

D-Link

D-Link DSL-604+ Bedienungsanleitung

D-Link

D-Link DVG-2032 Bedienungsanleitung

D-Link

D-Link DIV-140 Bedienungsanleitung

D-Link

D-Link DG-104SH Bedienungsanleitung

D-Link

D-Link DVG-2004S Bedienungsanleitung

D-Link

D-Link DI-701 iShare Bedienungsanleitung

D-Link

D-Link DG-102SP Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DVG-3104MS - VoiceCenter PSTN Gateway Bedienungsanleitung

D-Link

D-Link DVG-5008S Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung