D-Link DPG-2000W - AirPlus G Wireless Presentation... Bedienungsanleitung

Check Your Package Contents

These are the items included with your purchase:

If any of the below items are missing, please contact your reseller.

BeforeYouBegin

You will need the following:

•PentiumIII,750MHzorabovebasedcomputerwithaCD-ROMDrive

andaminimumof64MBRAMwithWindows XP, 2000, Me, or 98SE.

•IEEE802.11gwirelessadapterwithanIPaddress.

•WebbrowserwithJavascriptenabled.InternetExplorer5.xorabove,

Netscape6.xorabove,Mozilla1.0orabove, orOpera6.05 orabove.

•ProjectororMonitorwithVGAconnectorandVGAcable.

DPG-2000W

This product contains software

for use with Windows XP, 2000,

Me, and 98SE.

Wireless Presentation

Gateway

their respective holders. Software and specifications subject to change without notice. DPG-2000W.03232004

DPG-2000WWirelessPresentation Gateway

InstallationCD(Contains Software,Quick

InstallationGuide,andManual)

802.11g Antenna

AC Power Adapter

Using a power supply

with a different voltage

rating will damage this

productandvoidthewarranty.

Connections and LEDs

Front Panel

Rear Panel

Power LED: Lights solid green

whenconnectedtoapowersource.

Wireless LED:During boot-upthis

LEDwillremain unlit.While waiting

for a connection the LED blinks

amber rapidly. A solid green light

indicates a connection with a PC

hasbeen established.

AntennaConnector:The802.11g

antennaattaches here.

Projector / Monitor: Connects to

amonitororprojector’sVGAcable.

Reset button: Restores factory

defaultsettings.

Power Connector: The power

adapterattacheshere.

Connecting the DPG-2000W

Connect the DPG-2000W to a monitor

or projector

Connect a standard VGA monitor cable

tothe 15pinconnector labeledProjector/

Monitoron therear panel.

Attach the External Power Supply

Attach the external power adapter to the

powerconnectorlocatedontherearpanel

andplugthepoweradaptertoanACpower

outlet.

Attach the 802.11gAntenna

Attachthe802.11gantennatotheantenna

connector on the rear panel. Secure the

antenna in place by rotating the knob at

thebaseoftheantennaclockwise.Besure

the antenna is secure and in an upright

position.

Establishing a Wireless Link with the

DPG-2000W

Each wireless network adapter

manufacturer provides their own

wirelessconfigurationutility.Launch

theappropriate utilityand configure

the adapter with the following

settings:

•Infrastructuremode

•TheSSID displayedon the

DPG-2000Wbannerpage.

Wireless Utility Configuration

WhentheDPG-2000Wisconnected

to a monitor or projector and fully

booted,abannerscreenwillappear.

The SSID and channel information

are displayed at the top of the

screen.

Select the SSID matching the

DPG-2000W’s SSID displayed

onthe bannerscreen.

Installing the Presentation Session

Manager (PSM) Software

InserttheDPG-2000WCDintothe

CD-ROM drive and the following

screenwillappear.

Click on PSM Installer.

Click Next to begin the

softwareinstallation.

ThePSM software canbe installed onyour computeror run directlyfrom the CD-ROM.

Toinstallthe PresentationSessionManagersoftwareonyoursystem, followthescreens

inthissection. Ifyouwishto runthePresentation SessionManagerdirectly fromtheCD-

ROM, click on the Run from CD option and proceed to page 8.

Installing the Presentation Session

Manager (PSM) Software (continued)

Click Next to proceed

with the Typical install.

Click Next to use the

defaultdestinationfolder.

Click Next to use the

defaultprogramfolder.

Click Finish to complete

the installation.

Installing the Presentation Session

Manager (PSM) Software (continued)

Launching the Presentation Session

Manager (PSM) Software

Click OK toproceed.

BeforeStartingthe PresentationSessionManager,your system must

have a valid IP address.

IfyouinstalledthePSMsoftware

on your computer, Go to:

Start > Programs > D-Link Air

Plus G DPG-2000W Utility >

DPG2000W to launch the PSM.

Launching the Presentation Session

Manager (PSM) Software (continued)

Note: The PSM window must

remainopenbutcanbeminimized.

ClicktoEstablishaSession.

ClickOK

You should now be connected to the DPG-2000W. To install the administration software

andforadditionalinstallationandtroubleshooting information,pleasereferto theTechnical

Manualonthe CD-ROM.

Troubleshooting

If you are unable to connect or establish a session with the DPG-2000W.

•Verifythe SSIDofthe wirelessadaptermatches theSSIDof theDPG-2000W

displayed on the banner page on boot up.

•Ensurethecomputer’swirelessnetworkadapter is setfor Infrastructure mode.

•Ifthe DPG-2000W’sdefault encryptionsettings weremodified, verify thatthe

computer is using the same encryption settings.

•Try disconnecting power to the unit and then reconnecting it.

•Some DHCP-enabled wireless network adapters may take a while to obtain

a valid OS-assigned IP address. To verify whether a valid IP address has

been assigned:

In Windows 2000 and XP, go to Start > Programs >Accessories > Command

Prompt and at thecommand prompt type in ipconfig and hit enter.

In Windows 98SE and Me, go to Start > Run and type in winipcfg and click

ok.

Makesure thewireless network adapterconnecting tothe DPG-2000W does

notshow anIP addressof0.0.0.0. Ifso, tryreleasing the IPaddress andthen

renewing it. If the IP address remains 0.0.0.0, it may be necessary to assign

your wireless network adapter a static IP address. Please check with your

network administrator to assign the appropriate wireless settings.

•With certain brands of 802.11g cards, it might take a bit longer to link with

the DPG-2000W than with other brands of wireless cards. The reason for

this is that the drivers and features set of each brand might cause the link up

time between the DPG-2000W and the computer to take longer. Retry

establishing a session with the DPG-2000W using the PSM.

For more troubleshooting information, please refer to the Technical Manual on

the CD-ROM.

Andere Handbücher für DPG-2000W - AirPlus G Wireless Presentation...

Inhaltsverzeichnis

Andere D-Link Tor Handbücher

D-Link

D-Link DVG-5004S Bedienerhandbuch

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DPN-144DG Bedienungsanleitung

D-Link

D-Link DSA-3600 Bedienungsanleitung

D-Link

D-Link DFL-M510 Bedienungsanleitung

D-Link

D-Link DRO-220i Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DRO-210i Bedienungsanleitung

D-Link

D-Link DVG-6004S Bedienungsanleitung

D-Link

D-Link DPN-144DG Bedienungsanleitung

D-Link

D-Link DVG-2024S Bedienungsanleitung

D-Link

D-Link AirSpot DSA-3200 Bedienungsanleitung

D-Link

D-Link DVG-2032S Bedienungsanleitung

D-Link

D-Link DSL-604+ Bedienungsanleitung

D-Link

D-Link AirSpot DSA-3200 Bedienungsanleitung

D-Link

D-Link DCH-G020 Bedienungsanleitung

D-Link

D-Link DVG-7062S Bedienungsanleitung

D-Link

D-Link DSA-3110 Bedienungsanleitung

D-Link

D-Link DI-704 Bedienungsanleitung

D-Link

D-Link DVG-5008S Bedienungsanleitung

D-Link

D-Link DVG-5112S Bedienungsanleitung

D-Link

D-Link DFL-M510 Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DVX-3500 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung