D-Link DIV-140 Bedienungsanleitung

2D-Link DIV-140 Quick Install Guide

Package Contents

System Requirements

If any of the above items are missing, please contact your reseller.

• Computers with Windows®, Macintosh®, or Linux-based operating systems

and an installed Ethernet Adapter

• Internet Explorer version 6.0 or Netscape Navigator 7.0 or higher

(for conﬁguration)

• D-Link DIV-140 VoIP Gateway

• Power Adapter

• CAT5 Ethernet Cable

• RJ-45 to DB-9 Cable

• Four (4) RJ-11 Cables

• CD-ROM with Installation Guide, User Manual, and Special Offers

Note: Using a power supply with a different voltage than the one included with

the DIV-140 may damage the unit and will void the warranty for this product.

3 D-Link DIV-140 Quick Install Guide

Connecting the DIV-140 to your network

B. LAN Port

Connects DIV-140

to Ethernet enabled

device or switch.

A. Connect the power adapter to the receptor on the rear panel of the

DIV-140 and then plug the other end of the power adapter to a wall

outlet or power strip. The power LED will turn ON to indicate proper

operation.

A. Power Receptor

Receptor for Power

Adapter.

C.Connect the RJ-45 to DB-9 Console Cable from the Console port on the

DIV-140 to the Com Port on the computer that will be used to conﬁgure

the DIV-140.

Connect the LAN interface to the hub or switch connected to your internal

network using a CAT5 Ethernet cable. The LAN LED on the front of the

device should illuminate when a connection is made.

C. Console

U s e d t o c o n n e c t t h e

DIV-140 to the Com Port on

your computer.

PSTN Ports

Four (4) FXO ports used to

connect to wall phone jacks.

Reset Button

Press to reset the

DIV-140 to factory

default settings.

4D-Link DIV-140 Quick Install Guide

Conﬁguring the DIV-140

The terminal settings should

be 115200 8-N-1-N.

With the console cable connected from the Console port of the DIV-140

to the Com port of your PC, launch the HyperTerminal program:

A computer on your LAN must be assigned an IP address and subnet mask

in the same range as the DIV-140. By default, the DIV-140 is assigned an IP

address of 10.0.0.1 with a subnet mask of 255.0.0.0. It can be conﬁgured in

two ways, through the web interface or command line interface (CLI).

Enter admin for the Username and password for the

Password.

Power on the DIV-140, after the device boots up, login when prompted:

5 D-Link DIV-140 Quick Install Guide

It may be necessary to change the IP address of the DIV-140 to match

your local network. To change the IP address of the DIV-140, use the

following commands and procedure below:

At the Gateway prompt, enter the command, “set nw ip

[IP address] [subnet mask] [gateway address] [DNS address]”

and press Enter.

Verify the IP settings by entering the command, “show nw ip” and

pressing Enter. The IP settings will display:

6D-Link DIV-140 Quick Install Guide

After setting the IP address, you can conﬁgure the DIV-140 from the web

conﬁguration using a computer on your LAN. Open a web browser and

browse to the IP address of the DIV-140 using https.

Ex. https://192.168.0.2

Click Yes

Save the IP settings by using the “save” command. Press Enter,

and the DIV-140 will save the settings and reboot:

A Security Alert window will appear:

7 D-Link DIV-140 Quick Install Guide

After logging in, the System Information page will appear:

A login box will appear. Enter the user name and password. The default

user name is admin, and the default password is password.

Click OK

8D-Link DIV-140 Quick Install Guide

The following ﬁgure displays the setup for making VoIP to PSTN calls using

the DIV-140:

9 D-Link DIV-140 Quick Install Guide

The conﬁguration settings on the DIV-140 are as follows:

After logging into the DIV-140, browse to the System Conﬁguration >

Device page:

Verify the Country is set to the correct region and click Apply:

Verify the IP Conﬁguration settings are correct, and click Apply:

Browse to the Network Conﬁguration > General page:

10D-Link DIV-140 Quick Install Guide

Enter the VoIP Server IP PBX IP address or domain name and

Server Port. The server port is 5060 by default. Click Apply:

Browse to the Network Conﬁguration > General page:

Browse to the Port Conﬁguration > General page:

The DIV-140 has four (4) PSTN ports numbered 1-4. Select port

1 and conﬁgure the Phone Number and Display Name as 2001

Click Apply:

Andere Handbücher für DIV-140

Inhaltsverzeichnis

Andere D-Link Tor Handbücher

D-Link

D-Link DVG-3032S Bedienungsanleitung

D-Link

D-Link DSA 5100 - Airspot - Gateway Bedienungsanleitung

D-Link

D-Link DVG-1120S - VoIP Gateway/Router With 1 LAN... Bedienungsanleitung

D-Link

D-Link DPN-144DG Bedienungsanleitung

D-Link

D-Link DI-707 Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DSA 5100 - Airspot - Gateway Bedienungsanleitung

D-Link

D-Link DVG-5112S Bedienungsanleitung

D-Link

D-Link DSA-3110 Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DVG-5004S Bedienungsanleitung

D-Link

D-Link DSA-3110 Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link Airspot DSA-3100 Bedienungsanleitung

D-Link

D-Link DVG?6008G Bedienungsanleitung

D-Link

D-Link DFL-M510 Bedienungsanleitung

D-Link

D-Link DVG-3104MS - VoiceCenter PSTN Gateway Bedienungsanleitung

D-Link

D-Link DPN-1021G Bedienungsanleitung

D-Link

D-Link DFL-M510 Bedienungsanleitung

D-Link

D-Link DVG-2004S Gebrauchsanweisung

D-Link

D-Link DI-701 iShare Bedienungsanleitung

D-Link

D-Link DVG-3104MS - VoiceCenter PSTN Gateway Bedienungsanleitung

D-Link

D-Link DG-104SH Bedienungsanleitung

D-Link

D-Link DI-704 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung