D-Link DPN-1021G Bedienungsanleitung

Quick Installation Guide

DPN-1021G

GPON ONT VoIP Gateway with 1 GPON Port, 1

10/100/1000Base-T Port, 1 10/100Base-TX

Port, and 1 FXS Port

DPN-1021G Quick Installation Guide

BEFORE YOU BEGIN

Delivery Package

•GPON ONT VoIP gateway DPN-1021G

•Power adapter DC 12V/1A

•“Quick Installation Guide” (broc ure).

If any of t e items are missing, please contact your reseller.

T e “User Manual” and “Quick Installation Guide” documents are available

on D-Link website (see www.dlink.ru).

!Using a power supply with a different voltage rating than the one

included will cause damage and void the warranty for this product.

Default Settings

IP address o device 192.168.0.1

Username (login) admin

Password admin

Gateway DPN-1021G wit default settings cannot connect to t e

Internet. To get started, please set your own password for access to t e

web-based interface; t en, if needed, configure ot er settings

recommended by your ISP.

DPN-1021G Quick Installation Guide

System Requirements and Equipment

•A computer wit any operating system t at supports a web browser.

•A web browser to access t e web-based interface of t e gateway:

◦Apple Safari 8 and later

◦Google C rome 48 and later

◦Microsoft Internet Explorer 10 and later

◦Microsoft Edge 20.10240 and later

◦Mozilla Firefox 44 and later

◦Opera 35 and later.

•A NIC (Et ernet adapter) to connect to t e gateway.

•An analog p one.

DPN-1021G Quick Installation Guide

CONNECTING TO PC

Invisible laser radiation may be emitted from t e end of t e fiber and/or

from DPN-1021G . Take all necessary precautions to avoid unnecessary

exposure to t is radiation.

1. Connect an Et ernet cable between t e Et ernet port of your PC and t e

10/100/1000Base-T port (LAN1) or 10/100Base-TX port (LAN2).

2. To connect the device to a fiber optic line: connect t e fiber optic cable

to t e PON port in t e bottom panel of t e gateway. Make sure t at center

conductor of t e cable is inserted directly into t e center of t e PON

connector. Secure t e cable by carefully pus ing t e fiber connector onto

t e PON connector until tig t. Be careful not to over-tig ten t e

connector or you may damage eit er t e cable or t e device.

3. To connect the device to an Ethernet line: in t e web-based interface of

t e gateway, select t e gateway's LAN port t at will be used as t e WAN

port and create an Et ernet WAN connection. T en connect an Et ernet

cable between an available Et ernet port of t e gateway and t e Et ernet

line.

!Please connect t e gateway to t e ISP's Et ernet line only after setting

t e WAN port and creating t e Internet connection.

4. Connect a p one cable between t e FXS port of t e gateway and t e

p one.

5. Connect t e power cord to t e power connector port on t e back panel of

t e gateway, t en plug t e power adapter into an electrical outlet or power

strip.

6. Turn on t e gateway by pressing t e ON/OFF button on its back panel.

7. Wait for several minutes. W en t e device receives all needed settings,

t e PON LED will stop blinking and will lig t solid green. W en t e

Internet connection is establis ed, t e Internet LED will lig t solid

green.

Now you s ould configure your PC to obtain an IP address automatically (as

DHCP client).

DPN-1021G Quick Installation Guide

Obtaining IP Address Automatically

(OS indows 7)

1. Click t e Start button and proceed to t e Control Panel window.

2. Select t e Network and Sharing Center section. (If t e Control Panel

as t e category view (t e Category value is selected from t e View by

drop-down list in t e top rig t corner of t e window), c oose t e View

network status and tasks line under t e Network and Internet

section.)

3. In t e menu located on t e left part of t e window, select t e Change

adapter settings line.

4. In t e opened window, rig t-click t e relevant Local Area Connection

icon and select t e Properties line in t e menu displayed.

5. In t e Local Area Connection Properties window, on t e

Networking tab, select t e Internet Protocol Version 4 (TCP/IPv4)

line. Click t e Properties button.

DPN-1021G Quick Installation Guide

6. Make sure t at t e Obtain an IP address automatically and Obtain

DNS server address automatically c oices of t e radio buttons are

selected. Click t e OK button.

7. Click t e OK button in t e connection properties window.

DPN-1021G Quick Installation Guide

CONFIGURING GATEWAY

Connecting to eb-based Interface

Start a web browser. In t e address bar of t e web browser, enter t e IP

address of t e gateway (by default, 192.168.0.1). Press t e Enter key.

If t e error “ The page cannot be displayed ” (or “ Unable to display the

page ”/“ Could not connect to remote server ”) occurs upon connecting to

t e web-based interface of t e gateway, make sure t at you ave

properly connected t e gateway to your computer.

If t e device as not been configured previously or t e default settings ave

been restored, after access to t e web-based interface t e Initial Configuration

page opens (see t e Initial Configuration section, page 10).

DPN-1021G Quick Installation Guide

If you configured t e device previously, after access to t e web-based interface

t e login page opens. Enter t e username (admin) in t e Username field

and t e password you specified in t e Password field, t en click t e LOGIN

button.

DPN-1021G Quick Installation Guide

T e Summary page displays general information on t e gateway and its

software.

T e web-based interface of t e gateway is bilingual (Englis /Russian). You

can select t e needed language upon t e initial configuration of t e web-based

interface of t e gateway or in t e System / Con iguration section of t e

menu.

Ot er settings of t e gateway are available in t e menu in t e left part of t e

page. Go to t e relevant section and select t e needed page.

DPN-1021G Quick Installation Guide

Initial Configuration

If t e device as not been configured previously or t e default settings ave

been restored, t e Initial Configuration page opens automatically upon access

to t e web-based interface or upon opening a web site on t e Internet.

1. Click t e START button.

2. Click YES in order to leave t e current language of t e web-based

interface or click NO to select t e ot er language.

3. On t e next page, c ange t e default administrator password in t e

Admin password field.

Andere Handbücher für DPN-1021G

Inhaltsverzeichnis

Andere D-Link Tor Handbücher

D-Link

D-Link DVG-4088S Bedienungsanleitung

D-Link

D-Link DVG-7022S Bedienungsanleitung

D-Link

D-Link DBG-X1000 Bedienungsanleitung

D-Link

D-Link DSA 5100 - Airspot - Gateway Bedienungsanleitung

D-Link

D-Link DVG-2016 Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DVG-1120S - VoIP Gateway/Router With 1 LAN... Bedienungsanleitung

D-Link

D-Link DVG-5112S Bedienungsanleitung

D-Link

D-Link DVG-3104MS - VoiceCenter PSTN Gateway Bedienungsanleitung

D-Link

D-Link AirSpot DSA-3200 Bedienungsanleitung

D-Link

D-Link DFL-M510 Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DVG-3004S Bedienungsanleitung

D-Link

D-Link DVG-2016S Bedienungsanleitung

D-Link

D-Link DG-102SP Bedienungsanleitung

D-Link

D-Link DVG-6004S Bedienungsanleitung

D-Link

D-Link DVG-3104MS - VoiceCenter PSTN Gateway Bedienungsanleitung

D-Link

D-Link DVG-5008SG Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DVG-5008S Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DHM-401T Bedienungsanleitung

D-Link

D-Link VoIP Wireless Router DVG-G5402SP Bedienungsanleitung

D-Link

D-Link DSA-3600 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung