D-Link DSA 5100 - Airspot - Gateway Bedienungsanleitung

DSA-5100

INSTALLATION GUIDE

Package Contents

• D-Link®DSA-5100 Airspot™Enterprise Gateway

• CAT5 UTP Straight-Through Ethernet Cables (Qty. 3)

• CAT5 UTP Crossover Cable (Qty. 1)

• CD-ROM with manual

• Null modem RS-232 console cable (Qty. 1)

• Power Cord

System Requirements

• Computer with an Ethernet adapter and a Windows, Mac, or Unix based operating system.

• Internet Explorer or Netscape Navigator, version 6.0 or above, with JavaScript enabled.

©2006D-Link Systems, Inc.All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DSA-5100. 04182006

Hardware Overview

DSA-5100 Installation Guide

Front Panel

Hardware Overview

Rear Panel

Port Function

Console Direct connection to your computer’s serial port using an RS-232 cable for gateway configuration.

(The console settings are: Bits per second: 115200, Data bits: 8, Parity: None, Stop bits: 1)

Public LAN Connects to your open network environment. Requires authentication to use network resources and Internet.

Private LAN Connects to your trusted internal network. Authentication is not required to access network resources.

WAN1 Connects to your Internet connection or Intranet.

WAN2 Connects to your Internet connection or Intranet.

LED Function

Link Solid green indicates a good connection on the associated port.

Act The Act LED flashes during data transmission on the associated port.

Power A solid light indicates a proper connection to the power supply.

Status

The status LED has three states:

• Unlit when the system’s BIOS is loading or when powered off.

• Flashing indicates the operating system is loading.

• Solid when the system is fully loaded and ready to use.

Item Description

Power Connector The power cord attaches here.

Power Switch Powers the unit off and on.

Cooling Fans Be sure to keep the unit in a well ventilated area and do not block the cooling fan vents.

Hardware Installation

DSA-5100 Installation Guide

Hardware Installation

1.Connect the power cord to the power connector on the rear panel of the DSA-5100. Plug the other end of the power

cord to a wall outlet or power strip.

2.Turn on the power switch on the rear panel of the DSA-5100. The Power LED will illuminate.

3.Connect an Ethernet cable to the port labeled Public LAN on the DSA-5100. Connect the other end of the Ethernet

cable to a switch or wireless access point that will provide public access to your broadband connection. The Public

LAN LED should illuminate to indicate a proper connection.

4.Connect an Ethernet cable to the port labeled Private LAN on the DSA-5100. Connect the other end of the Ethernet

cable to a switch. The Private LAN LED should illuminate to indicate a proper connection.

5.Connect an Ethernet cable to the port labeled WAN1 on the DSA-5100. Connect the other end of the Ethernet cable

to a broadband modem. If the connection is live, the WAN1 LED will illuminate.

6.(Optional) Connect an Ethernet cable to the port labeled WAN2 on the DSA-5100. Connect the other end of the

Ethernet cable to a router or directly to a high speed connection. If the connection is live, the WAN2 LED will

illuminate.

The Setup Wizard

DSA-5100 Installation Guide

The Setup Wizard

The DSA-5100 provides Web based configuration.

You can configure your DSA-5100 using Internet

Explorer or Netscape Navigator version 6.0 or above

with JavaScript enabled. To access the configuration

screen, launch your Web browser and enter the IP

addressoftheDSA-5100intheaddressfieldandpress

enter.If using the DSA-5100’sdefaultIPaddress, you

would enter https://192.168.0.40 (Note: Include the

“s”attheendofhttps toensureasecureconnection).

Once you’ve connected to the DSA-5100, the Login

screen appears. By default, admin is the User Name

and Password. Type admin in the User Name and

Password fields and click Enter.

After successfully logging in, the Home screen will

appear. Click on the System Configuration folder on

the left panel to reveal the System Configuration

options.ThefirstoptiondisplayedistheConfiguration

Wizard. Click on this to display the Configuration

Wizard screen.

The Setup Wizard

DSA-5100 Installation Guide

Step 1 - Change Admin’s Password

Enter a new password for the admin account and

retype it in the verify password field. Click Next to

continue.

Click on the Run Wizard button to begin the Setup

Wizard.

The Setup Wizard appears, click Next to begin.

The Setup Wizard

DSA-5100 Installation Guide

Step 2 - Choose System’s Time Zone

Select your time zone and click Next to continue.

Step 3 - Set System Information

•Succeed Page: Enter the URL that users should be

directed to when successfully authenticated.

•External Time Server: Enter the URL of external time

server for the gateway to synchronize the time from.

•WAN Port DNS Server: Enter a DNS Server provided by

your Internet Service Provider. Contact your ISP if you are

unsure of the IPAddress to enter here.

Step 4 - Select the Connection Type for

WAN1 Port

Select the type of Internet connection that you have. If you

are unsure of which to select, please contact you Internet

Service Provider. Click Next to continue. If you selected

DHCP, proceed to step 5 on page 8.

The Setup Wizard

DSA-5100 Installation Guide

Step 4 - Set WAN1 Port’s Static IP Address

If you selected Static IP, enter the IP address information

provided by your Internet Service Provider. You must

complete all of the fields. Click Next and continue to Step 5

on page 8.

Step 4 - Set PPPoE Client’s Information

If you selected PPPoE, enter the Username and Password

provided by your Internet Service Provider. Click Next and

continue to Step 5 on page 8.

The Setup Wizard

DSA-5100 Installation Guide

Step 5 - Configure Public LAN

• IP Address and Subnet Mask: Enter the IP

Address and Subnet Mask of the DSA-5100 for the

Public LAN port.

• Disable DHCP Server: If this option is selected,

then LAN clients must be configured with an IP

address manually.

• Enable DHCP Server: When selected, this allows

the DSA-5100 to automatically provide the

necessary IP information to all Public LAN clients

configured for DHCP.

Step 5 - Set Public LAN’s DHCP Server

• Start IP Address, End IP Address: These fields

define the IP address range that will be assigned to

the Public LAN clients configured for DHCP.

Be sure the IP range does not conflict with any

manually configured network devices or the IP

address of the DSA-5100.

• Domain Name: Enter a domain name provided by

your ISP.

• Primary DNS Server, Secondary DNS Server:

The DNS Server settings are provided by your

Internet Service Provider. Only the Primary DNS

Server field is mandatory. Contact your ISP if you

are unsure of the DNS Server settings.

Step 6 - Restart

Click on Restart to save the current settings and

restartthe DSA-5100.The Setup Wizard is complete!

System Configuration

DSA-5100 Installation Guide

System Configuration

System Information

•System Name: The system name of the DSA-5100. Used for SNMP purposes. The default is DSA-5100.

•Administrator Info: Information on how to contact the system administrator can be entered here. The administrator’s

name, phone number, and e-mail address can be entered here. If a user connects to the DSA-5100 and WAN1 has a

connection problem, the user logon screen will show the system administrator information that was entered here.

•Succeed Page: Enter a URL to direct users to once they have been authenticated. Typically this would be a company

web page such as www.dlink.com.

•Remote Management IP: When enabled, the IP address entered has the ability to manage the DSA-5100 via the

WAN1 interface. This allows the system at the specified IP address to manage the DSA-5100 over the Internet.

•Access History IP: The IP address of your billing system should be entered here to allow the billing system to access

the DSA-5100’s billing history information.

•SNMP: The DSA-5100 supports SNMP v2 read only data access. The administrator can specify the IP address and the

SNMP community name to determine the target of the management information base (MIB) exported from the DSA-5100.

•User Logon SSL: When enabled, the user logon is secure using https. If disabled, standard http is used.

•Time:The DSA-5100 supports NTPTime Server configuration for accurately synchronizing the network time. If NTP is

enabled,youcan enter an NTPserverfor time synchronization.Thealternateoption is Set Device Dateand Time,which

allows you to manually specify the time.

System Configuration

DSA-5100 Installation Guide

IP PNP: When enabled, you can use any IP address to connect to the Public LAN.You can authenticate to the DSA-5100

and access network resources regardless of your IP configuration. Note: This function only works when NAT is used.

Mobile IP: This option allows a user to use the same IP configuration across a network using several DSA-5100 units.

Global LAN Configuration

You can set the system to Enable or Disable the IP PNP or mobile IP options for the public LAN and private LAN

simultaneously.

Interface Configuration

The Interface Configuration options only vary slightly between the Public LAN, Private LAN, and VLAN Configurations.

The VLAN Configuration is the only configuration that provides the VLAN Tag option. The Private LAN Port doesn’t have

the option for UserAuthentication.

• VLAN: Enable or disable the VLAN option (only applicable in the Public LAN and VLAN Interface Configuration).

• Enable User Authentication: Controls user authentication per selected interface when enabled. The default is

disabled.

•Operation Mode:

NATMode: In this mode, all IP addresses that are connected through the Public LAN Port are converted into the IP

address of the WAN1 Port for external communication.

Router Mode: All IP addresses that are connected through the Public LAN Port use their individual IP addresses for

external communication. In this mode, the DSA-5100 acts like a Router.

• IP Address: The IP address to be used for the selected interface.

• Subnet Mask: The subnet mask to be used for the selected interface.

Andere Handbücher für DSA 5100 - Airspot - Gateway

Inhaltsverzeichnis

Andere D-Link Tor Handbücher

D-Link

D-Link Airspot DSA-3100 Bedienungsanleitung

D-Link

D-Link DRO-210i Bedienungsanleitung

D-Link

D-Link DG-104S Bedienungsanleitung

D-Link

D-Link DVG-7022S Bedienungsanleitung

D-Link

D-Link DVG-6004S Bedienungsanleitung

D-Link

D-Link DVG-5112S Bedienungsanleitung

D-Link

D-Link DI-704 Bedienungsanleitung

D-Link

D-Link DVG-2016S Bedienungsanleitung

D-Link

D-Link DPG-2000W - AirPlus G Wireless Presentation... Bedienungsanleitung

D-Link

D-Link AirSpot DSA-3200 Bedienungsanleitung

D-Link

D-Link DVG-5004S Bedienerhandbuch

D-Link

D-Link DVG-7022S Bedienungsanleitung

D-Link

D-Link DVG-5008SG Bedienungsanleitung

D-Link

D-Link DPG-2000W - AirPlus G Wireless Presentation... Bedienungsanleitung

D-Link

D-Link DBG-X1000 Bedienungsanleitung

D-Link

D-Link DVG-2032 Bedienungsanleitung

D-Link

D-Link DVG-3104MS - VoiceCenter PSTN Gateway Bedienungsanleitung

D-Link

D-Link DG-102SP Bedienungsanleitung

D-Link

D-Link DG-104S Bedienungsanleitung

D-Link

D-Link DVG?6001G Bedienungsanleitung

D-Link

D-Link DSA-3600 Bedienungsanleitung

D-Link

D-Link Airspot DSA-3100 Bedienungsanleitung

D-Link

D-Link DFL-M510 Bedienungsanleitung

D-Link

D-Link DI-701 iShare Kurzanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung