D-Link DCS-825L Bedienungsanleitung
Contents
1. How do I set up and install my Baby Camera? ................................................................ 1
2. What are the minimum system requirements for the Baby Camera? .......................... 11
3. How can I communicate through the Baby camera using two-way audio?.................. 11
4. The image is out of focus, how do I correct it? ............................................................. 13
5. How do I play a lullaby through the Baby camera?....................................................... 14
6. How do I change the password on my Baby Camera? .................................................. 15
3. How do I reset my camera to factory default settings? ................................................ 18
4. How do I configure motion detection on my mydlink Baby Camera using the mydlink
service?................................................................................................................................. 19
5. How do I configure Sound Detection on my mydlink Baby Camera using the mydlink
service?................................................................................................................................. 24
6. How do I configure Temperature Detection on my mydlink Baby Camera using the the
mydlink service? ................................................................................................................... 29
7. How do I manually upgrade the firmware on my baby camera using Windows®? ...... 34
8. How do I manually upgrade the firmware on my mydlink Baby Camera using a
computer with a Mac operating system?............................................................................. 37
9. How do I mount my camera to a wall or ceiling?.......................................................... 39
10. How do I configure Internet Explorer® to allow ActiveX Controls?........................... 40
11. How do I access my Baby camera remotely by using mydlink Web Portal?.............. 42
1. How do I set up and install my Baby Camera?
Step 1: Plug in your Baby Camera and wait until the Power LED turns green.
You can use the included power adapter, or you can use a portable USB battery (not included)
that can supply 5V/2A of power.
Step 2: Download the free mydlink Baby Camera Monitor app on your smartphone
or tablet.
Step 3: Connect directly to the camera’s Wi-Fi signal. The Wi-Fi network name and password
are located on the label on the base of the unit.
iPhone/iPad: Settings > Wi-Fi Settings
Android: Settings > Wireless & Networks > Wi-Fi Settings
Step 3: Launch the mydlink Baby Camera Monitor app. The app will guide you through the
configuration process.
Step 4: Tap Setup.
Step 5: If you have not done so already, connect the included power cable (or a USB power
source) to the camera. Tap Next.
Setp 6: Confirm that the Power LED on the base of the unit is lit solid green. Tap Next.
Step 7: Tap the name of the mydlink Baby Camera which you want to set up.
Step 8: Create a name and password for your camera. If you wish to change the name of your
camera, enter the new name in the Camera Name field, otherwise just leave the default
name. To specify an administrator password for your camera, enter a password in the
Password field, and re-enter it again in the Confirm Password field (this password is for the
setup utility of the camera, and is not the same as the password for your Wi-Fi network). Tap
Next.
Step 9: Select your home’s Wi-Fi network from the list provided (you can scroll down the list
if several networks are available) and enter the password for your wireless network in the
Password field. You can also manually enter the name of the network you wish to connect to
in the Network Name field. Tap Connect.
:
Step 10:
A. If you want to link your camera to the mydlink sevice, tap I want to use the mydink™
service.
1. If you want to register your camera with your existing mydlink account, enter yor email
address and password in the fields provided.
2. If you don’t have a mydlink account, check the Create a new mydlink™ account box and
enter the email address and password you wish to use to create your new account. Tap
Next.
Tap Finish. Please continue to step 12.
B. If you do not wish to register your camera with the mydlink service at this time, tap I do
not want to use the free mydlink™ service. Please note that you will not be able to view
your camera’s live feed remotely if you have not registered for the mydlink service.
Step 12: Tap the device icon for the DCS-825L.
Step 13: Tap OK to continue to the live video page. Your camera’s live video will appear on
the following screen.
Andere Handbücher für DCS-825L
7
Inhaltsverzeichnis
Andere D-Link IP-Kamera Handbücher
D-Link
D-Link SECURICAM Network DCS-2100 Bedienungsanleitung
D-Link
D-Link Air DCS-1000W Bedienungsanleitung
D-Link
D-Link SECURICAM Network DCS-900W Bedienungsanleitung
D-Link
D-Link SECURICAM Network DCS-5300G Bedienungsanleitung
D-Link
D-Link SECURICAM NETWORK DCS-5300 Bedienungsanleitung
D-Link
D-Link SECURICAM Network DCS-6620 Bedienungsanleitung
D-Link
D-Link SECURICAM Network DCS-900 Bedienungsanleitung
D-Link
D-Link DHA-390 Bedienungsanleitung
D-Link
D-Link SECURICAM Network DCS-900 Bedienungsanleitung
D-Link
D-Link SECURICAM Network DCS-2120 Bedienungsanleitung
D-Link
D-Link DCS-936L Bedienungsanleitung
D-Link
D-Link DCS-942L Installationsanleitung
D-Link
D-Link DCS-6220 Bedienungsanleitung
D-Link
D-Link SECURICAM Network DCS-900 Bedienungsanleitung
D-Link
D-Link SECURICAM Network DCS-2120 Bedienungsanleitung
D-Link
D-Link DCS-1000 Bedienungsanleitung
D-Link
D-Link DCS-6620G - Network Camera Bedienungsanleitung
D-Link
D-Link SECURICAM Network DCS-2100 Bedienungsanleitung
D-Link
D-Link DCS-5610 Bedienungsanleitung
D-Link
D-Link DCS?6010L Bedienungsanleitung
