D-Link mydlink DSP-W215 Bedienungsanleitung
Version 2.00 | 08/13/2014
User Manual
DSP-W215
mydlink™ Home Smart Plug
iD-Link DSP-W215 User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization
of such revisions or changes.
Manual Revisions
Revision Date Description
2.00 August 13, 2014 • Setup revision
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App
StoreSM is a service mark of Apple Inc. Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc. Internet Explorer®, Windows®
and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2014 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed
written permission from D-Link Corporation, Inc.
Power Usage
This device is an Energy Related Product (ErP) designed to be always on. If it is not needed during certain periods of time, it can be unplugged to
save energy.
Preface
iiD-Link DSP-W215 User Manual
Table of Contents
Product Overview .............................................................. 1
Package Contents ......................................................................... 1
System Requirements ................................................................. 2
Introduction ................................................................................... 3
Hardware Overview .....................................................................4
LEDs and Buttons ..................................................................4
Safety ................................................................................................ 5
Before you Begin ........................................................................... 5
Wireless Installation Considerations ...................................... 6
Installation and Setup .......................................................7
mydlink™ Home ...............................................................16
My Devices ....................................................................................16
DSP-W215 ......................................................................................17
Schedule ........................................................................................18
Information ...................................................................................20
My Actions ....................................................................................21
My Places .......................................................................................23
Connecting to a Wireless Router ....................................25
WPS Button ...................................................................................25
Troubleshooting ..............................................................26
Technical Specications ..................................................27
Table of Contents
1D-Link DSP-W215 User Manual
Section 1 - Product Overview
Product Overview
Package Contents
If any of the above items are missing, please contact your reseller.
DSP-W215 mydlink™ Home Smart Plug
Quick Install Guide
Quick Install Card
2D-Link DSP-W215 User Manual
Section 1 - Product Overview
System Requirements
General Requirements • Wireless router (802.11n) with an Internet connection
• An available power outlet
Mobile Requirements • iPhone, iPad, or Android smartphone or tablet1
mydlink Requirements • For mydlink and mydlink app requirements refer to:
http://www.mydlink.com
1Please refer to the mobile app’s store page to check whether your device is compatible.
3D-Link DSP-W215 User Manual
Section 1 - Product Overview
Introduction
The D-Link DSP-W215 mydlink™ Home Smart Plug is a multi-purpose, compact, and easy-to-use device that allows you to
monitor and control your home’s electronic devices from wherever you are. Scheduling provides a helpful way to save power
while you’re at work or asleep, and the mydlink™ Home app provides an easy way to check usage, set up alerts, or turn a device
on or o. Most importantly, the DSP-W215 will safeguard against damage to your home and appliances due to overheating,
giving you peace of mind.
Control Your Power Usage From Anywhere
With the DSP-W215, you’ll have the ability to control the power supply to electronic devices in your home. Set a schedule that
turns your TV o when you’re asleep, or ensures that your desk lamps aren’t left on when you’re at work. The mydlink™ Home
app will allow you to switch your appliances on or o in an instant, and change your power schedules on-the-go, ensuring
that you don’t have to worry about leaving something on while you’re away.
Compact and Convenient
20% smaller than traditional plug-in timers, the DSP-W215 blends seamlessly into your wall outlet without taking up extra
space. No extra cables are necessary as the Smart Plug simply layers over your existing plug socket.
Easy to Set Up
Simply push the Wi-Fi Protected Setup (WPS) button on the DSP-W215, and then on your home mydlink router, to establish
a secure connection in an instant. The Smart Plug will automatically be added to your list of devices on the mydlink™ Home
app, allowing you to get started right away.
4D-Link DSP-W215 User Manual
Section 1 - Product Overview
Hardware Overview
LEDs and Buttons
1
4
5
1 WPS Button Press for one second to start the WPS connection process. The System Status LED will start to blink green.
2 System Status LED
Solid Green The uplink is established and an IP is provisioned.
Blinking Green WPS is activated.
Blinking Orange The uplink is not established or an IP is not provisioned.
Solid Red The device is powering on or is defective.
Light O The device is powered o.
3 Power Plug Plug the Smart Plug into a wall power socket.
4 Reset Button To reset the device to factory defaults, press and hold for about 10 seconds until the Status LED turns red.
5 Power Socket Connect your appliances, lamps, and other electronic devices you wish to monitor.
6Power Button /
Status LED Press the power button to turn the connected device on or o. The LED will be solid green if the device is powered on.
2
3
6
5D-Link DSP-W215 User Manual
Section 2 - Installation
Before you Begin
Safety
Please read all of the safety and operating instructions before using your device:
1. Do not open the device or attempt to repair or service it.
2. Use the device in a dry location, and avoid placing it in a humid environment.
3. Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect
from the power outlet and use a damp towel.
4. This device should only be used indoors.
Plan the location of your Smart Plug devices:
1. Connect Smart Plug devices into electrical outlets that are not controlled by a wall switch. This will help you to
avoid accidentally turning o power to the device.
2. Verify that your Smart Plug devices are electrically rated to operate with the power available in your location.
3. Be sure to plug the power cables into properly grounded electrical outlets in order to help prevent against electrical
shock.
6D-Link DSP-W215 User Manual
Section 2 - Installation
Wireless Installation Considerations
The Smart Plug lets you access your network using a wireless connection from anywhere within the operating range of your
wireless network. Keep in mind the number and thickness of walls and ceilings, as well as the location of other objects that the
wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background
RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the Smart Plug and other network devices to a minimum. Each
wall or ceiling can reduce your adapter’s range by 3-90 feet (1-30 meters). Position your devices so that the
number of walls or ceilings is minimized.
2. Strive for a direct line between network devices. A wall that is 1.5 feet thick, at a 45-degree angle, will appear
to be almost three feet thick. At a two-degree angle it appears to be over 42 feet thick! Position your devices
so that the signal will travel straight through a wall or ceiling, instead of at an angle, for the best reception.
3. Be aware of the type of building materials between your devices. A solid metal door or aluminum studs may
have a negative eect on range. Try to position the Smart Plug and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh
tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least three to six feet) from electrical devices or appliances that generate RF noise.
5. If you are using 2.4 GHz cordless phones or wireless products such as ceiling fans, lights, and home security
systems, your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone
base is as far away from your wireless devices as possible. The base transmits a signal even when the phone is
not in use.
7D-Link DSP-W215 User Manual
Section 2 - Installation
Installation and Setup
To install your Smart Plug, rst download and install the mydlink™ Home
app on your mobile device. This app will walk you through installing and
conguring your Smart Plug.
Step 2:
Once the mydlink™ Home app is installed, launch the app and follow the
on-screen instructions.
Step 1:
Download the mydlink™ Home app from the App Store (iPhone, iPad, or
iPod touch) or Google Play (Android).
Step 3:
Log into your mydlink account. If you don’t have one, sign up for a free
mydlink account by clicking the Sign Up! link.
Tap Add a new device.
Step 4:
The My Devices page will appear.
Tap Add a new device.
Andere Handbücher für mydlink DSP-W215
5
Inhaltsverzeichnis
