D-Link DMC-1002 Bedienungsanleitung

Rev. 01 (JUN. 2003)

1907MCB10016001

DMC-1002

SNMP Module fo

Chassis-Based Media Converter

Manual

RECYCLABLE

TABLE OF CONTENTS

ABOUT THIS GUIDE.................................................................. 2

FEATURES......................................................................................................2

UNPACKING...................................................................................................2

CONFIGURING THE SYSTEM.......................................... 3

THE MEDIA CONVERTER CHASSIS SYSTEM ...................................................3

INSTALLING THE MANAGEMENT MODULE ....................................................3

CONFIGURE THROUGH WEB BROWSER ..........................................................4

CONFIGURATION VIA SERIAL PORT ...............................................................4

SUPPORT SNMP MANAGEMENT ...................................................................5

LED INDICATORS..........................................................................................5

MANAGEMENT SETTING THROUGH WEB

BROWSER............................................................................................ 6

MANAGEMENT SETTING THROUGH

TERMINAL EMULATOR...................................................... 14

WHEN FORGOT THE PASSWORD ...................................................................20

TECHNICAL SPECIFICATIONS.................................... 21

ABOUT THIS GUIDE

This manual shows you how to configuring your DMC-1002 SNMP Module

for Chassis-Based Media Converter.

Features

 Compliant with IEEE802.3u 100BASE-TX standards

 Enable to monitor the module through terminal emulation program and

Web browser

 The network administrator can access management software by

connecting the management module either to a terminal emulation

program (through the RS232 interface) or to a remote network

management station (through the RJ45 interface and a hub)

 Status indication include:

1. Identification of: Media Converter type; Slot number occupied

2. Status Indication of Chassis: Redundant Power status; Power Fail status;

Fan Fail status

3. Status Indication of Modules: Unit Power; Link/Activity; Transmit; Receive

 LED Indication: Power/Power Fail/Fan Fail/MGM/Console/Link/ACT

 Support Hot-swappable

 Auto-negotiation for half-duplex/full-duplex on TX ports

 Equipped with a 19” system chassis 16-converter with Redundant Power

supply for optional Expansion use.

Unpacking

Open the shipping carton of the SNMP Module and carefully unpack its

contents. The carton should contain the following items:

One DMC-1002 SNMP Module for Chassis-Based Media Converter

One RS232 cable

This Manual

If any item is found missing or damaged, please contact your local reseller for replacement.

CONFIGURING THE SYSTEM

This chapter provides network managers and system administrators with

information about how to configure the Media Converter Chassis system.

The reader of this document should be knowledgeable about network devices,

device configuration, network management, and Internet browsers. The user

is assumed to be a network administrator or manager with an understanding

of network operations.

The Media Converter Chassis system

The chassis’s first slot is for the management module as illustration on figure

Figure 1. Slide in the management module in the first slot of the chassis system.

Installing the Management Module

Before Configure the chassis system, you must do the following:

 Install the management module into the chassis. (Figure 1)

 Connect the module to the network.

 Boot up for SNMP management on Web browser or emulation terminal

program.

Configure through Web browser

The Media Converter chassis system is accessible using a Web browser (IE

explorer, Netscape Communications, etc.) to open up the chassis monitoring

system. The default IP Address for the chassis system is “192.168.1.1”, and

the default Login name and password is both “root”.

Configuration via Serial Port

The Media Converter chassis system can be accessible using a terminal or

terminal emulator attached to the RS232 serial port on the Switch too.

NOTE: (1) The serial port cable is attached directly with the device.

(2) It needs to upgrade the Terminal Emulator due to key malfunction.

1. Locate correct DB9 serial port cable with female DB9 connector.

2. Attach the DB9 serial port female cable connector to the male DB9 serial

port connector on the chassis system.

3. Attach the other end of the DB9 serial port cable to a remote workstation.

4. By default, the Switch uses the following serial port parameter values:

Bits per second 57600

Stop bits 1

Data bits 8

Parity NONE

Flow Control NONE

5. The default Login name and password is both “root”.

Andere Handbücher für DMC-1002

Inhaltsverzeichnis

Andere D-Link Medienkonverter Handbücher

D-Link

D-Link 1000BASE-SX Bedienungsanleitung

D-Link

D-Link DMC 1000 - Modular Expansion Base Bedienungsanleitung

D-Link

D-Link DMC-515SC Bedienungsanleitung

D-Link

D-Link DEM-310GT Technisches Datenblatt

D-Link

D-Link DUB-AV200 Bedienungsanleitung

D-Link

D-Link DCF-650WK Bedienungsanleitung

D-Link

D-Link DMC-920R Bedienungsanleitung

D-Link

D-Link DMC-G01LC Bedienungsanleitung

D-Link

D-Link DFE-855 Bedienungsanleitung

D-Link

D-Link DMC-300SC - Media Converter - External Bedienungsanleitung

D-Link

D-Link 10/100BASE-TX to 100BASE-FX Media Converter Bedienungsanleitung

D-Link

D-Link 100Base-FX Bedienungsanleitung

D-Link

D-Link 1000Base-T to mini-GBIC Media Converter... Bedienungsanleitung

D-Link

D-Link DMC-805X Bedienungsanleitung

D-Link

D-Link DMC-G01LC Bedienungsanleitung

D-Link

D-Link DMC-1910R Bedienungsanleitung

D-Link

D-Link DMC-1530SC Bedienungsanleitung

D-Link

D-Link DMC-810SC Bedienungsanleitung

D-Link

D-Link 10BASE-TX Bedienungsanleitung

D-Link

D-Link DMC-G01LC Bedienungsanleitung

D-Link

D-Link DMC-920 Bedienungsanleitung

D-Link

D-Link DIS-M100G-SW Bedienungsanleitung

D-Link

D-Link DUB-AV200 Bedienungsanleitung

D-Link

D-Link 1000BASE-TX to 1000BASE-SX/LX Media... Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung