D-Link DNS-722-4 Bedienungsanleitung

Quick Install Guide

DNS-722-4/DNS-726-4

2-Bay Network Video Recorder

2D-Link DNS-722-4/726-4 Quick Install Guide

Package Contents

Hardware Requirements

One or two 3.5” SATA hard disk drives*

Network Requirements

• IP Camera(s) (See the D-Link website for a list of supported cameras.)

• Subscribed broadband internet connection (for remote access)

• Gigabit Ethernet Switch and Internet Router (or Internet Router with a

with an available Gigabit Ethernet LAN port)

Remote PC Minimum Requirements

• Operating System: Windows® 2000/XP/2003/Vista™

• CPU: Pentium 4 – 2.4GHz or greater

• RAM: 512MB

• Web Browser: Internet Explorer v6.0 or later

Optional

UPS with USB interface

*Hard disk drives should be from the same manufacturer. To ensure maximum performance,

identical drives are recommended for RAID 1 congurations.

• D-Link DNS-722-4/ DNS-726-4 Network Video Recorder (NVR)

• CAT5 Ethernet Cable

• Power Adapter

• Cable Holder

• Keys

• Manual and Software on CD

• Quick Install Guide

Note: Using a power supply with a different voltage than the one included with

your product will cause damage and void the warranty for this product.

System Requirements

3D-Link DNS-722-4/726-4 Quick Install Guide

Hardware Overview

Power Button:

Press once to power on the NVR. Press and hold the button until the LED

begins to blink to power down the NVR.

Drive LEDs:

These LEDs will be solid BLUE when the drives are connected but inactive.

The LEDs will blink when the drives are being accessed, formatted or

synchronized. They will illuminate AMBER if a drive has failed.

Activity LED:

The LED will be solid BLUE when there is an Ethernet connection. It will

blink to indicate LAN trafc.

Front View

Network Activity LED

Power Button

Drive LED Drive LED

4D-Link DNS-722-4/726-4 Quick Install Guide

Key Lock:

Use this lock to secure the front panel of the NVR. The panel can be

unlocked with the provided key for initial installation.

Bottom

Key Lock

5D-Link DNS-722-4/726-4 Quick Install Guide

Rear Panel (Connections)

Power Receptacle:

The supplied power adapter connects here.

Gigabit Ethernet Port:

The Gigabit Ethernet port connects the NVR to a network.

Drive Eject Lever:

Use these levers to eject the hard drives. The front panel must be removed

before ejecting the drives. Make sure to reset the ejector before installing

the new hard drive.

Drive Eject Lever Drive Eject Lever

Cable Holder

Power Receptacle

Fan

Security Cable Slot

USB Connector

Reset Button Gigabit Ethernet Port

6D-Link DNS-722-4/726-4 Quick Install Guide

Reset Button:

A pinhole button located beside the Ethernet socket is used to reset the

system or restore the factory default settings. To reset, simply press and

hold the button until the power LED ashes.

USB Connector:

A UPS can be used as an emergency power supply for the NVR. The UPS

can use the USB interface to notify the NVR to perform a proper shutdown

before battery power runs out.

Security Cable Slot:

An external lock can be afxed to this slot to prevent theft.

Fan:

The NVR will adjust the system temperature automatically by turning the

fan on/off.

Cable Holder:

Holds the power cable to ensure a safe operating environment.

Note: After resetting the unit, you will still be able to access the recorded data

on your hard drives.

7D-Link DNS-722-4/726-4 Quick Install Guide

Connecting Your NVR to the Network

Your Network Setup

8D-Link DNS-722-4/726-4 Quick Install Guide

Hardware Installation

2. Slide the faceplate up until it

unlatches from the device.

3. Once the faceplate is unlatched,

pull it off the device, exposing the

drive bays.

Install the Hard Drives:

1. Please install a SATA HDD before

turning on the NVR. Use the key

to unlock the faceplate from the

bottom of the NVR.

9D-Link DNS-722-4/726-4 Quick Install Guide

4. Insert a 3.5” SATA hard drive into

an available drive bay. Make sure

to align the drive connector to the

SATA connector on the bottom edge

inside the drive bay of the NVR.

Gently push the drive in until it

connects. When a drive is inserted

properly, you will feel it “seat” into the

connector. Some hard drives that are

thin or oddly shaped may need to

be guided carefully into position. If a

drive is not properly seated, the LED

will not illuminate after powering on

the device.

Optional: When installing an optional

second HDD, please repeat Step

4. To avoid data incompatibility in

RAID 1 operation, useidentical SATA

drives from the same manufacturer.

Formatted drive capacity for RAID 1

operation is dependant on the HDD

with the lowest capacity.

5. Attach the faceplate to the front of

the device.

10D-Link DNS-722-4/726-4 Quick Install Guide

Note: To turn off the NVR, simply push the power button for 5 seconds. The

power LED will blink and the NVR will turn off after a moment.

Connect the UPS (Optional)

If you have a Universal Power Supply

(UPS) that you would like to use with the

NVR, you may connect it before powering

the unit on.

1. Connect the USB cable from the UPS to

the port on the back of the NVR.

2. Connect the power cable to the UPS.

(Ensure that the UPS is plugged in and

receiving power.)

Connect the Ethernet Cable

Connect an Ethernet cable to the Ethernet

port. Connect one end of the Ethernet

cable to the NVR. Connect the opposite

end of this cable to a Gigabit Ethernet

LAN port of a router or a switch, or directly

to a computer.

6. Lock the faceplate to secure the

HDDs.

Andere Handbücher für DNS-722-4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere D-Link Netzwerk-Hardware Handbücher

D-Link

D-Link DFM 562I Bedienungsanleitung

D-Link

D-Link ShareCenter Pulse DNS-320 Bedienungsanleitung

D-Link

D-Link DLB-1200 Bedienungsanleitung

D-Link

D-Link DNS-300 Bedienungsanleitung

D-Link

D-Link JustConnectDNR-2020-04P Bedienungsanleitung

D-Link

D-Link SharePort DIR-825 Bedienungsanleitung

D-Link

D-Link xStack Storage DSN-4000 Series Sicherheitsleitfaden

D-Link

D-Link DXS-3610-54S Bedienungsanleitung

D-Link

D-Link DNS-1200-5 Bedienungsanleitung

D-Link

D-Link ShareCenter Shadow DNS-325 Bedienungsanleitung

D-Link

D-Link DSM-750 - MediaLounge High-Definition Draft N Media... Bedienungsanleitung

D-Link

D-Link DNR-F4432-16P Bedienungsanleitung

D-Link

D-Link DNS-120 - NAS Server - USB Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

D-Link

D-Link DNR-F4108-08P Bedienungsanleitung

D-Link

D-Link mydlink DNR-312L Bedienungsanleitung

D-Link

D-Link xtreme n duo dap-1522 Bedienungsanleitung

D-Link

D-Link DNS-323 - Network Storage Enclosure NAS... Bedienungsanleitung

D-Link

D-Link xStack Storage DSN-4000 Series Bedienungsanleitung

D-Link

D-Link MYDLINK DNR-322L Bedienungsanleitung

D-Link

D-Link ShareCenter Shadow DNS-325 Bedienungsanleitung

D-Link

D-Link DIR-505 Bedienungsanleitung

D-Link

D-Link DSN-6000 Series Bedienungsanleitung

D-Link

D-Link DNR-2020-04P Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung

Cantek

Cantek NR310-4 Bedienungsanleitung