D-Link ShareCenter Pulse DNS-320 Bedienungsanleitung
QUICK
INSTALLATION
GUIDE
快速安裝指南
ENGLISH
Package Contents
System Requirements
For best results, the following system requirements are recommended:
• Computer with: 1GHz processor / 512 MB RAM / 200 MB
available space / CD-ROM drive
• Internet Explorer version 7.0 or Mozilla Firefox 3.0 and above
• 3.5” SATA Hard Drive(s)
• Windows® XP (with Service Pack 2), Vista™ and Windows 7
• D-Link ShareCenter Pulse 2-Bay Network Storage
• CD-ROM with Manual and Software
• Quick Installation Guide
• Power Adapter
• CAT5 Ethernet Cable
Note: Using a power supply with a different voltage than the one included with
the ShareCenter Pulse will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
Hardware Overview
ENGLISH
System Requirements
Hardware Overview
Front View
HDD1/HDD2 LEDS:
These lights will be solid BLUE when drives are connected but inactive. The lights
will blink when the drives are being accessed, formatted or synchronized. They will
illuminate AMBER if a drive has failed.
USB LED:
This light will illuminate when a USB device is inserted into the USB Port. This light
will blink when there is trafc.
USB Port:
This is the USB Port. Devices like a USB Printer, UPS or USB drive can be inserted
here.
Power LED:
This light will illuminate when this ShareCenter Pulse is powered on.
Power Button:
Press once to power on the ShareCenter Pulse. Press and hold the button until it
begins to blink to power down the ShareCenter Pulse.
USB Copy Button:
Press to copy data from USB drive to ShareCenter Pulse. Press and hold 5 seconds
to un-mount the USB drive.
Front Latch:
This panel can be latched or unlatched simply by pressing on it.
HDD2 LED
HDD1 LED Power LED
USB Port
USB LED
Front Latch
USB Copy Button
Power Button
ENGLISH
Cover Lock:
This lock is used to remove the cover when unlocked. Locking it will restrict the
removal of the top cover.
Cable Hook:
This hook can be used to neatly store the cables connected to the ShareCenter Pulse.
Power Outlet:
The supplied power adapter connects here.
Reset Button:
A pinhole button located beside the Ethernet socket is used to reset the system or
restore the factory default settings.
Note: After resetting the unit you will still be able to access the data on your hard
drives.
Rear Fan:
This is the rear fan used for ventilation.
LAN Port:
A Gigabit Ethernet port that connects the ShareCenter Pulse to a network.
Security Lock:
This lock can be used to tie the ShareCenter Pulse to the desk to prevent theft. Cables
are sold separately.
Cover Lock
Security Lock
LAN Port
Rear Fan
Power Outlet
Cable Hook
Reset Button
Hardware Overview
Rear View (Connections)
ENGLISH
Hardware Setup
This section provides installation information for the ShareCenter Pulse. To
install the ShareCenter Pulse on your local network, refer to the steps below:
3. Insert a 3.5” SATA hard drive into
an available drive bay. 4. Re-attach the top cover.
1. To remove the top cover you have
move the cover lock to the right. 2. While holding the cover lock, slide
the top cover backwards. After
sliding the top cover backwards,
lift the top cover up to remove it.
Hardware Overview
ENGLISH
6. Connect the power adapter to the
power socket.
5. Connect an Ethernet cable to the
available Ethernet port. This cable
should connect the ShareCenter
Pulse to your local network via a
router or switch, or directly to a
computer for conguration.
Make sure to align the drive connector to the SATA connector on the bottom
edge inside the drive bay of the ShareCenter Pulse. Gently push the drive in
until it connects. When a drive is inserted properly, you will feel it “seat” into
the connector. Some hard drives that are thin or oddly shaped may need to be
guided carefully into position. If a drive is not properly seated, the light will not
illuminate after powering on the device.
Easy Search Utility
ENGLISH
Easy Search Utility
When rst powered on, during the initial boot sequence, the ShareCenter
Pulse will wait to be assigned an IP address via DHCP. It is recommended
to use the included D-Link Easy Search Utility when accessing and
conguring the ShareCenter Pulse for the rst time.
If you want to change the IP address before logging in or if you are
unable to connect to the ShareCenter Pulse IP address, you can use
the Easy Search Utility provided on the product CD to locate the device
on your network and make any needed changes.
ENGLISH
To run the Easy Search Utility, insert the ShareCenter Pulse CD into
your CD-ROM drive:
Getting Started
Step 1: Click Easy Search Utility.
Step 2: Highlight an available
ShareCenter Pulse and click
Configuration to access the web-
based utility.
Step 3: The Login screen will appear:
Type admin for the username and
leave the password eld blank.
Click on the ‘Conguration’ button.
Step 4: When logging in to this unit for
the rst time, the user will be prompted
to format the HDD in the device. In this
window, information about the HDDs
inserted will be displayed. Click ‘Next’
to continue to the next step.
Please note that the data stored on
the drives will be erased during this
process.
ENGLISH
Step 5: The four options are: Standard,
JBOD, RAID 0 and RAID 1.
When prompted to congure the Hard
Drive Settings:
Select the type of hard drive
configuration. In this configuration
we’ll use RAID 1 as the example
conguration.
Step 6: Auto-Rebuild is a feature that
will allows the ShareCenter Pulse to
initiate the Rebuilding phase
automatically. The Rebuilding phase
will occur when one or more hard
drives fail and is replaced by a new
one.
WARNING - This feature will
automatically format the newly added
drive. If this feature is NOT required,
click disable.
Click Next to continue.
Step 7: In this section the user can
view the available capacity that RAID
1 can use on the hard drives installed.
Then the user can configure the
desired capacity to be used for the
RAID 1 conguration by entering the
desired capacity amount in the block
provided.
To utilize the remaining space, (if the
two HDDs differ in capacity), the user
can choose to use JBOD for the
remaining space. Tick this option is
needed.
Click Next to continue.
ENGLISH
Step 8: In this section a summary of
the conguration will be displayed.
When ready click on the Format button
to initiate the RAID conguration. This
process will involve initializing,
formatting and conguration of the
RAID chosen.
Step 9: Lastly a conguration summary
will be displayed.
Click in the Finish button to complete
the setup procedure. This will redirect
the user to the Login screen again.
A warning message will be displayed
before the procedure starts stating that
hard drives will be formatted and if the
user wishes to continue. Click OK to
continue.
This RAID conguration starts with
Initializing.
Then continues to format and congure
the RAID conguration.
Mapping a Drive
Andere Handbücher für ShareCenter Pulse DNS-320
12
Inhaltsverzeichnis
Sprachen:
Andere D-Link Netzwerk-Hardware Handbücher
D-Link
D-Link DSL-2520U Bedienungsanleitung
D-Link
D-Link DES-1252 - Web Smart Switch Bedienungsanleitung
D-Link
D-Link xtreme n duo dap-1522 Bedienungsanleitung
D-Link
D-Link JustConnectDNR-2020-04P Bedienungsanleitung
D-Link
D-Link DNS-321 - Network Storage Enclosure Hard Drive... Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-315 Bedienungsanleitung
D-Link
D-Link DNR-2020-04P Bedienungsanleitung
D-Link
D-Link DNS-722-4 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-343 Bedienungsanleitung
D-Link
D-Link DSH-G200 Bedienungsanleitung
D-Link
D-Link DGS-1024TG Anleitung zur Verwendung
D-Link
D-Link DHP-343 Bedienungsanleitung
D-Link
D-Link DNR-2060-08P Bedienungsanleitung
D-Link
D-Link DSN-1100 Bedienungsanleitung
D-Link
D-Link DNS-323 - Network Storage Enclosure NAS... Bedienungsanleitung
D-Link
D-Link ShareCenter Shadow DNS-325 Bedienungsanleitung
D-Link
D-Link xStack Storage DSN-4000 Series Bedienungsanleitung
D-Link
D-Link DNS-300 Bedienungsanleitung
D-Link
D-Link Nuclias Connect Hub Plus DNH-200 Bedienungsanleitung
D-Link
D-Link ShareCenter Shadow DNS-325 Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
evertz
evertz 7700 Series Bedienungsanleitung
