D-Link DIR-825M Bedienungsanleitung
DIR-825M
AC1200 MU-MIMO Wi-Fi Gigabit Router
BEFORE YOU BEGIN
Delivery Package
Default Settings
• Router DIR-825M
• Power adapter DC 12V/1A
• Ethernet cable
• “Quick Installation Guide” (brochure).
If any of the items are missing, please contact your reseller.
The “User Manual” and “Quick Installation Guide” documents are available
on D-Link website.
IP address of router: 192.168.0.1
Username (login): admin
Password: (as printed on the device label)
dlink-825M-2.4G-xxxx
dlink-825M-5G-xxxx
Wireless Password: (as printed on the device label)
Using a power supply with a different voltage rating than the one included
will cause damage and void the warranty for this product.
!
!
Name of wireless
network (SSID):
The router DIR-825M with default settings cannot connect to the
Internet.To get started, please set your own password for access to the
web-based interface and change the WLAN name (SSID); then, if
needed, configure other settings recommended by your ISP.
SYSTEM REQUIREMENTS AND EQUIPMENT
SAFETY RULES AND CONDITIONS
• A computer with any operating system that supports a web browser.
• A web browser to access the web-based interface of the router: Apple Safari 8
and later, Google Chrome 48 and later, Microsoft Internet Explorer 10 and later,
Microsoft Edge 20.10240 and later, Mozilla Firefox 44 and later, Opera 35 and
later.
• A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
• An 802.11a, b, g, n, or ac Wi-Fi adapter to connect to a wireless network.
Please carefully read this section before installation and connection of the device.
Make sure that the power adapter and cables are not damaged. The device should
be used only as intended in accordance with the documents.
The device is intended for use in dry, clean, dust-free, and well ventilated areas with
normal humidity away from strong heat sources. Do not use the device outdoors or
in the areas with high humidity. Do not place foreign objects on the device. Do not
obstruct the ventilation openings of the device. The environmental temperature near
the device and the temperature inside the device's cover should be within the range
from 0 °С to +40 °С.
Only use the power adapter supplied with the device. Do not plug in the adapter, if
its case or cable are damaged. Plug the adapter only into working electrical outlets
with parameters indicated on the adapter.
Do not open the cover of the device! Unplug the device before dusting and cleaning.
Use a damp cloth to clean the device. Do not use liquid/aerosol cleaners or magnet-
ic/static cleaning devices. Prevent moisture getting into the device or the
poweradapter.
1. Connect the power cord to the power connector port on the back panel of the
router, then plug the power adapter into an electrical outlet or power strip.
2. Connect the router to your PC.
3. Start a web browser. In the address bar of the web browser, enter the
IPaddress of the router (by default, 192.168.0.1). Press the Enter key.
After the firs t access to the web-based interface you are forwarded to the s tart
page of the Setup Wizard.
4. Click the Next button.
5. Select a Mode (Router, Bridge/AP or WISP)
6. Click the Next button in order to configure the device with the Setup
Wizard or the Cancel button to configure all needed setting manually.
When the web-based interface is accessed the next time and after, the login page
opens. Enter the username (admin) in the Username field and the password you
specified in the Password field, then click the LOGIN button.
Use the menu in the top part of the page to configure the router.
To exit the web-based interface, select the Logout menu section.
CONNECTION AND CONFIGURATION
• PC with Ethernet adapter: Connect an Ethernet cable between an available
Ethernet port of the router and the Ethernet port of your PC. Turn on the router by
pressing the POWER button on its back panel. Make sure that the Ethernet
adapter of your PC is configured to obtain an IP address automatically.
• PC with Wi-Fi adapter: Turn on the router by pressing the POWER button on its
back panel. Make sure that the Wi-Fi adapter of your PC is on and configured to
obtain an IP address automatically. Connect to the network
(for operating in the 2.4GHz band) or dlink-825M-5G-xxxx (for operating in the
5GHz band). Use wireless password from the device label.
dlink-825M-2.4G-xxxx
Ques tion 1. How do I reset the router to the factory
default settings?
You can restore the factory default settings via the hardware RESET button
located on the back side of the router.
1. Use a small paperclip to activate the button; insert it into the hole (with the
device turned on), push, and hold for 10 seconds.
2. Release the button and wait until the router is rebooted (about a minute
or two).
Then access the web-based interface (see the Default Settings section of the
present document) and configure all needed settings.
Ques tion 2. What can I do if my router is not working
correctly?
Below are some steps applicable to the most common issues.
1. Check the LEDs on the top panel of the router. The following LEDs should be
solid or blinking blue : POWER, INTERNET, LAN (corresponding to the LAN
ports of the router to which devices from the router's local area network are
connected), 2.4GHz WLAN and 5GHz WLAN (if the 2.4GHz or 5GHz wireless
network correspondingly is ON and in use).
2. Make sure that all cables are connected properly.
3. Power off the router for 20 seconds, then power it on again.
Ques tion 3. Why am I unable to connect to the Internet?
Contact your ISP to make sure that the relevant service is available and that you
use correct connection settings.
TROUBLESHOOTING
TECHNICAL SUPPORT
You can find software updates and user documentation
on the D-Link website.
Tech Support for cus tomers in:
D-Link Middle East - Dubai, U.A.E.
Technical Support: +971-4-8809033
Egypt
Technical Support Call Center: +20 2258 66777
Kingdom of Saudi Arabia
Technical Support: +966 1121 70009
Pakistan
Technical Support: +92-21-34548310, 34305069
Morocco
Phone office: +212 700 13 14 15
Email: [email protected]
Bahrain
Technical Support: +973 1 3332904
Kuwait
Email: [email protected]
South Africa
Technical Support: +27-08600-35465, 012 741 2000
Latin America
la.dlink.com/la/soporte
2020/11/2 F1500022
Andere Handbücher für DIR-825M
2
Inhaltsverzeichnis
Andere D-Link Netzwerk-Router Handbücher
D-Link
D-Link Air DWL-810 Bedienungsanleitung
D-Link
D-Link DIR-457U Bedienungsanleitung
D-Link
D-Link DSL-2750U Bedienungsanleitung
D-Link
D-Link DSL-2750U Produktinformationsblatt
D-Link
D-Link DSL-2500U Bedienungsanleitung
D-Link
D-Link DSL-2750E Bedienungsanleitung
D-Link
D-Link DES-3624 - Switch - Stackable Bedienungsanleitung
D-Link
D-Link DSL-2750E Bedienungsanleitung
D-Link
D-Link DSL-G2452GR Bedienungsanleitung
D-Link
D-Link DSL-2730U Bedienungsanleitung
D-Link
D-Link DIR-850L Bedienungsanleitung
D-Link
D-Link DWR-712 Bedienungsanleitung
D-Link
D-Link DIR-822 Bedienungsanleitung
D-Link
D-Link DIS-100E Series Bedienungsanleitung
D-Link
D-Link DSL-G804V Bedienungsanleitung
D-Link
D-Link AirPlus DWL-G730AP Bedienungsanleitung
D-Link
D-Link R12 Bedienungsanleitung
D-Link
D-Link DHP-601AV Bedienungsanleitung
D-Link
D-Link DES-1016D - Switch Bedienungsanleitung
D-Link
D-Link DVG-N5402SP Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise