D-Link DSL-2750U Bedienungsanleitung

Quick Installation Guide

DSL-2750U

Wireless ADSL2+ Router with

3G/LTE/Ethernet WAN Su ort

and USB Port

DSL-2750U Quick Installation Guide

BEFORE YOU BEGI

Delivery Package

•Router DSL-2750U

•Power adapter DC 12V/1A

•RJ-11 telephone ca le

•Ethernet ca le

•Splitter

•“Quick Installation Guide” ( rochure).

If any of the items are missing, please contact your reseller.

The “User Manual” and “Quick Installation Guide” documents are availa le

on D-Link we site (see www.dlink.ru).

!Using a power supply with a different voltage rating than the one

included will cause damage and void the warranty for this product.

Default Settings

IP address of wireless router 192.168.1.1

Username (login) admin

Password admin

ame of wireless network (SSID) DSL-2750U

etwork key (PSK)

see WPS PIN on the

arcode la el on the

ottom panel of the

device

DSL-2750U Quick Installation Guide

System Requirements and Equipment

•A computer with any operating system that supports a we rowser.

•A we rowser to access the we - ased interface of the router:

◦Apple Safari 8 and later

◦Google Chrome 48 and later

◦Microsoft Internet Explorer 10 and later

◦Microsoft Edge 20.10240 and later

◦Mozilla Firefox 44 and later

◦Opera 35 and later.

•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.

•An 802.11 , g, or n Wi-Fi adapter to create a wireless network.

•A USB modem (when it is necessary to connect to the Internet via mo ile

operators' networks)1.

Your USB modem should e equipped with an active SIM card of your

operator.

Some operators require su scri ers to activate their USB modems prior

to using them. Please, refer to connection guidelines provided y your

operator when concluding the agreement or placed on its we site.

For some models of USB modems, it is required to disa le the PIN

code check on the SIM card prior to connecting the USB modem to the

router.

1 Contact your operator to get information on the service coverage and fees.

DSL-2750U Quick Installation Guide

CO ECTI G TO PC

PC with Ethernet Adapter

1. Make sure that your PC is powered off.

2. Connect an Ethernet ca le etween any of four Ethernet ports located on

the ack panel of the router and the Ethernet port of your PC.

3. To connect via USB modem: connect your USB modem to the USB port2

located on the ack panel of the router.

!In some cases you will need to re oot the router after connection of the

USB modem.

4. To connect the router to a DSL line: connect a phone ca le etween the

DSL port of the router and the ADSL OUT port of the splitter. Connect

your phone to the PHO E port of the splitter. Then connect another

phone ca le etween a phone jack and the ADSL I port of the splitter.

5. To connect the router to an Ethernet line: run the Initial Configuration

Wizard and select the router's LAN port that will e used as the WAN

port. Then connect the Ethernet ca le etween the selected Ethernet port

located on the ack panel of the router and the Ethernet line.

6. Connect the power cord to the power connector port on the ack panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

7. Turn on the router y pressing the O /OFF utton on its ack panel.

8. Turn on your PC and wait until your operating system is completely

loaded.

Now you should configure your PC to o tain an IP address automatically (as

DHCP client).

2 It is recommended to use a USB extension ca le to connect a USB modem to the

router.

DSL-2750U Quick Installation Guide

Obtaining P Address Automatically

in OS Windows XP

1. Click the Start utton and proceed to the Control Panel > etwork

and Internet Connections > etwork Connections window.

2. In the etwork Connections window, right-click the relevant Local

Area Connection icon and select the Properties line in the menu

displayed.

3. In the Local Area Connection Properties window, on the General

ta , select the Internet Protocol (TCP/IP) line. Click the Properties

utton.

DSL-2750U Quick Installation Guide

4. Select the Obtain an IP address automatically and Obtain D S

server address automatically radio uttons. Click the OK utton.

5. Click the ОК utton in the connection properties window.

Now your computer is configured to o tain an IP address automatically.

DSL-2750U Quick Installation Guide

Obtaining P Address Automatically

in OS Windows 7

1. Click the Start utton and proceed to the Control Panel window.

2. Select the etwork and Sharing Center section. (If the Control Panel

has the category view (the Category value is selected from the View by

drop-down list in the top right corner of the window), choose the View

network status and tasks line under the etwork and Internet

section.)

3. In the menu located on the left part of the window, select the Change

adapter settings line.

4. In the opened window, right-click the relevant Local Area Connection

icon and select the Properties line in the menu displayed.

5. In the Local Area Connection Properties window, on the

etworking ta , select the Internet Protocol Version 4 (TCP/IPv4)

line. Click the Properties utton.

DSL-2750U Quick Installation Guide

6. Select the Obtain an IP address automatically and Obtain D S

server address automatically radio uttons. Click the OK utton.

7. Click the OK utton in the connection properties window.

Now your computer is configured to o tain an IP address automatically.

DSL-2750U Quick Installation Guide

PC with Wi-Fi Adapter

1. To connect via USB modem: connect your USB modem to the USB port3

located on the ack panel of the router.

!In some cases you will need to re oot the router after connection of the

USB modem.

2. To connect the router to a DSL line: connect a phone ca le etween the

DSL port of the router and the ADSL OUT port of the splitter. Connect

your phone to the PHO E port of the splitter. Then connect another

phone ca le etween a phone jack and the ADSL I port of the splitter.

3. To connect the router to an Ethernet line: run the Initial Configuration

Wizard and select the router's LAN port that will e used as the WAN

port. Then connect the Ethernet ca le etween the selected Ethernet port

located on the ack panel of the router and the Ethernet line.

4. Connect the power cord to the power connector port on the ack panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

5. Turn on the router y pressing the O /OFF utton on its ack panel.

6. Turn on your PC and wait until your operating system is completely

loaded.

7. Turn on your Wi-Fi adapter. As a rule, modern note ooks with uilt-in

wireless NICs are equipped with a utton or switch that turns on/off the

wireless adapter (refer to your PC documents). If your PC is equipped

with a plugga le wireless NIC, install the software provided with your

Wi-Fi adapter.

Now you should configure your Wi-Fi adapter.

3 It is recommended to use a USB extension ca le to connect a USB modem to the

router.

DSL-2750U Quick Installation Guide

Configuring Wi-Fi Adapter in OS Windows XP

1. Click the Start utton and proceed to the Control Panel > etwork

and Internet Connections > etwork Connections window.

2. Select the icon of the wireless network connection and make sure that

your Wi-Fi adapter is on.

3. Search for availa le wireless networks.

4. In the opened Wireless etwork Connection window, select the

wireless network DSL-2750U and click the Connect utton.

5. In the opened window, enter the network key (see WPS PIN on the

arcode la el on the ottom panel of the device) in the etwork key and

Confirm network key fields and click the Connect utton.

After that the Wireless etwork Connection Status window appears.

If you perform initial configuration of the router via Wi-Fi connection,

note that immediately after changing the wireless default settings of the

router you will need to reconfigure the wireless connection using the

newly specified settings.

Andere Handbücher für DSL-2750U

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link Express Ethernetwork DI-704P Bedienungsanleitung

D-Link

D-Link DES-3010G Bedienungsanleitung

D-Link

D-Link Express EtherNetwork DI-604 Bedienungsanleitung

D-Link

D-Link DIS-100G-5W Bedienungsanleitung

D-Link

D-Link DSL-2750U Bedienungsanleitung

D-Link

D-Link SmartPro DGS-1500 Series Bedienungsanleitung

D-Link

D-Link DI-1162M Bedienungsanleitung

D-Link

D-Link DIR-330 - Wireless G VPN Router Bedienungsanleitung

D-Link

D-Link DSL-6740B Bedienungsanleitung

D-Link

D-Link DSL-526E Bedienungsanleitung

D-Link

D-Link Express Ethernetwork DI-704P Bedienungsanleitung

D-Link

D-Link xStack DGS-3120-24PC Bedienungsanleitung

D-Link

D-Link DWR-960 Bedienungsanleitung

D-Link

D-Link DI-524UP Bedienungsanleitung

D-Link

D-Link DSL-2640U Bedienungsanleitung

D-Link

D-Link DSL-2640BT Bedienungsanleitung

D-Link

D-Link DGS-3700-12 Bedienungsanleitung

D-Link

D-Link COVR DKT-883 Bedienungsanleitung

D-Link

D-Link COVR-X1862 Montageanleitung

D-Link

D-Link DIR-878 Bedienungsanleitung

D-Link

D-Link DIR-815/AC Bedienungsanleitung

D-Link

D-Link DSL-2750E Bedienungsanleitung

D-Link

D-Link N600 Bedienungsanleitung

D-Link

D-Link DIR-130 - Broadband VPN Router Einrichtungshandbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise